From owner-freebsd-questions Thu Jan 25 10:08:44 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id KAA05352 for questions-outgoing; Thu, 25 Jan 1996 10:08:44 -0800 (PST) Received: from server1.netpath.net (server1.netpath.net [205.139.153.2]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id KAA05347 for ; Thu, 25 Jan 1996 10:08:41 -0800 (PST) Received: (from deasey@localhost) by server1.netpath.net (8.7.1/8.7.1) id NAA10251; Thu, 25 Jan 1996 13:08:21 -0500 Date: Thu, 25 Jan 1996 13:08:21 -0500 (EST) From: Geoffrey Deasey To: Scott Tanaka cc: freebsd-questions@freebsd.org Subject: Re: Setup not Recognizing HDs In-Reply-To: <3107A121.6838@leahi.kcc.hawaii.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org Precedence: bulk I think the main ide controller was at 0x1f0 irq14 and the alternate was at 0x170 irq 15 I don't know if the kernel is configurable to 160, maybe someone else will answer that ------------------------------------------------------------------ FreeBSD / Linux | Netpath, Inc & Stratonet, Inc. | ------------------+ 2466 Corporation Parkway | Opinions are mine | Burlington, NC 27215 910-226-0425 | not theirs +----------------------------------------------+ On Thu, 25 Jan 1996, Scott Tanaka wrote: > I just downloaded the 2.1.0 version of FreeBSD and have been trudging > through the installation. I cannot get the setup program to recognize my > hard drive, so I'm left with no physical drives to install to! Big > problem! Anyhow, my drives run off of a IDE controller card with set the > drive at port 0160h, irq 10. I've changed the settings for the generic > IDE controller option in the config and it still won't recognize. Do you > have any ideas? > Thanks, > Scott >