Date: Thu, 16 Jul 2020 23:15:50 -0700 From: Mark Millard <marklmi@yahoo.com> To: freebsd-arm <freebsd-arm@freebsd.org>, FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: Pine64+2GB unable to boot after attempted update, failure very early: efipart_readwrite: rw=1, blk=... size=32 status=7; RPi3 has no problem Message-ID: <B719FBD3-F26C-40A9-8CA1-4FE89ADE4222@yahoo.com> In-Reply-To: <F9305636-79D0-4A0A-9CE3-F27CED51A9A5@yahoo.com> References: <F9305636-79D0-4A0A-9CE3-F27CED51A9A5@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[Trying again: I missed removing a type of character (escape)
beyond the [?25h removals. My choice of editor was not the
best for the context and it was not obvious that the
escapes were present.]
I'll mostly just send the text that has the
additional removals. The boot text with the error
messages then is:
U-Boot SPL 2020.07 (Jul 13 2020 - 12:12:14 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.3():
NOTICE: BL31: Built : 23:56:54, Apr 26 2020
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x4092b68, model: Pine64+
NOTICE: PSCI: System suspend is unavailable
alloc space exhausted
U-Boot 2020.07 (Jul 13 2020 - 12:12:14 +0000) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Pine64+
DRAM: 2 GiB
MMC: mmc@1c0f000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default =
environment
In: serial
Out: serial
Err: serial
Net: phy interface7
eth0: ethernet@1c30000
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1b000 for devices... 3 USB Device(s) found
scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Hit any key to stop autoboot: 2 =08=08=08 1 =08=08=08 0=20
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
38612 bytes read in 4 ms (9.2 MiB/s)
Found EFI removable media binary efi/boot/bootaa64.efi
Scanning disk mmc@1c0f000.blk...
** Unrecognized filesystem type **
Scanning disk usb_mass_storage.lun0...
** Unrecognized filesystem type **
** Unrecognized filesystem type **
** Unrecognized filesystem type **
Found 7 disks
7[r[999;999H[6n8BootOrder not defined
EFI boot manager: Cannot load any image
695648 bytes read in 33 ms (20.1 MiB/s)
[2J[1;1H[2J[1;1HConsoles: EFI console =20
|/-\|/-\| Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
/-\|/-FreeBSD/arm64 EFI loader, Revision 1.1
Command line arguments: loader.efi
Image base: 0xb8e63000
EFI version: 2.80
EFI Firmware: Das U-Boot (rev 8224.1792)
Console: comconsole (0)
Load Path: /efi\boot\bootaa64.efi
Load Device: =
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x403=
b,0x1ffe0)
Trying ESP: =
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x403=
b,0x1ffe0)
Setting currdev to disk0p1:
\|/-\|/-\|/-Trying: =
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x244=
00,0xe600000)
Setting currdev to disk0p2:
\|/-\|efipart_readwrite: rw=3D1, blk=3D123244224 size=3D32 status=3D7
/efipart_readwrite: rw=3D1, blk=3D148608 size=3D32 status=3D7
-efipart_readwrite: rw=3D1, blk=3D148545 size=3D32 status=3D7
efipart_readwrite: rw=3D1, blk=3D148545 size=3D32 status=3D7
\efipart_readwrite: rw=3D1, blk=3D148608 size=3D32 status=3D7
|efipart_readwrite: rw=3D1, blk=3D148545 size=3D32 status=3D7
efipart_readwrite: rw=3D1, blk=3D148545 size=3D32 status=3D7
/efipart_readwrite: rw=3D1, blk=3D148608 size=3D32 status=3D7
-efipart_readwrite: rw=3D1, blk=3D148545 size=3D32 status=3D7
efipart_readwrite: rw=3D1, blk=3D148545 size=3D32 status=3D7
ERROR: cannot open /boot/lua/loader.lua: no such file or directory.
Type '?' for a list of commands, 'help' for more detailed help.
OK=20
The contrasting RPi3B text near the area with first errors above:
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08Trying: =
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x244=
00,0xe600000)
Setting currdev to disk0p2:
=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08Lo=
ading /boot/defaults/loader.conf
/=08-=08\=08|=08/=08-=08\=08Loading /boot/defaults/loader.conf
Loading /boot/device.hints
|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08Loading =
/boot/loader.conf
|=08/=08-=08\=08Loading /boot/loader.conf.local
(I'll not list more.)
For reference:
# gpart show -p
=3D> 63 249737153 mmcsd0 MBR (119G)
63 16380 - free - (8.0M)
16443 131040 mmcsd0s1 fat32lba [active] (64M)
147483 997 - free - (499K)
148480 241172480 mmcsd0s2 freebsd (115G)
241320960 8416256 - free - (4.0G)
=3D> 0 241172480 mmcsd0s2 BSD (115G)
0 230686720 mmcsd0s2a freebsd-ufs (110G)
230686720 10485760 - free - (5.0G)
=3D> 40 468862048 da0 GPT (224G)
40 2008 - free - (1.0M)
2048 413138944 da0p1 freebsd-ufs (197G)
413140992 6291456 da0p2 freebsd-swap (3.0G)
419432448 6291456 da0p4 freebsd-swap (3.0G)
425723904 43138184 - free - (21G)
# find /boot/efi/ -print | sort | more
/boot/efi/
/boot/efi/COPYING.linux
/boot/efi/EFI
/boot/efi/EFI/BOOT
/boot/efi/EFI/BOOT/bootaa64.efi
/boot/efi/LICENCE.broadcom
/boot/efi/System Volume Information
/boot/efi/System Volume Information/WPSettings.dat
/boot/efi/armstub8.bin
/boot/efi/bcm2710-rpi-2-b.dtb
/boot/efi/bcm2710-rpi-3-b-plus.dtb
/boot/efi/bcm2710-rpi-3-b.dtb
/boot/efi/bcm2710-rpi-cm3.dtb
/boot/efi/bootcode.bin
/boot/efi/config.txt
/boot/efi/dtb
/boot/efi/dtb/allwinner
/boot/efi/dtb/allwinner/sun50i-a64-pine64-lts.dtb
/boot/efi/dtb/allwinner/sun50i-a64-pine64-plus.dtb
/boot/efi/dtb/allwinner/sun50i-a64-pine64.dtb
/boot/efi/dtb/allwinner/sun50i-a64-pinebook.dtb
/boot/efi/dtb/allwinner/sun50i-a64-sopine-baseboard.dtb
/boot/efi/dtb/overlays
/boot/efi/dtb/overlays/spigen-rpi3.dtbo
/boot/efi/dtb/overlays/sun50i-a64-opp.dtbo
/boot/efi/dtb/overlays/sun50i-a64-pwm.dtbo
/boot/efi/dtb/overlays/sun50i-a64-rpwm.dtbo
/boot/efi/dtb/overlays/sun50i-a64-spi0-spigen.dtbo
/boot/efi/dtb/overlays/sun50i-a64-timer.dtbo
/boot/efi/fixup.dat
/boot/efi/overlays
/boot/efi/overlays/disable-bt.dtbo
/boot/efi/overlays/mmc.dtbo
/boot/efi/overlays/pwm.dtbo
/boot/efi/start.elf
/boot/efi/u-boot.bin
(Where /boot/efi refers to /dev/mmcsd0s1 .)
I forgot to indicate: that the context is based
on head -r363123 FreeBSD and -r542111 ports.
=3D=3D=3D
Mark Millard
marklmi at yahoo.com
( dsl-only.net went
away in early 2018-Mar)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B719FBD3-F26C-40A9-8CA1-4FE89ADE4222>