From owner-freebsd-mobile@FreeBSD.ORG  Thu Nov 11 07:47:19 2004
Return-Path: <owner-freebsd-mobile@FreeBSD.ORG>
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 208B216A4CE
	for <freebsd-mobile@freebsd.org>;
	Thu, 11 Nov 2004 07:47:19 +0000 (GMT)
Received: from ctb-mesg2.saix.net (ctb-mesg2.saix.net [196.25.240.74])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 979CB43D5C
	for <freebsd-mobile@freebsd.org>;
	Thu, 11 Nov 2004 07:47:16 +0000 (GMT)
	(envelope-from wiqd@codelounge.co.za)
Received: from [192.168.0.6] (nngy-85-107.telkomadsl.co.za [165.165.85.107])
	by ctb-mesg2.saix.net (Postfix) with ESMTP
	id 35315D827; Thu, 11 Nov 2004 09:47:11 +0200 (SAST)
From: wiqd <wiqd@codelounge.co.za>
To: freebsd-mobile@freebsd.org
Message-Id: <1100159273.2584.9.camel@fyre.codelounge.co.za>
Mime-Version: 1.0
X-Mailer: Ximian Evolution 1.4.6 (1.4.6-2) 
Date: Thu, 11 Nov 2004 09:47:53 +0200
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
X-Content-Filtered-By: Mailman/MimeDel 2.1.1
cc: wiqd@codelounge.co.za
Subject: Gigabyte wireless network card
X-BeenThere: freebsd-mobile@freebsd.org
X-Mailman-Version: 2.1.1
Precedence: list
List-Id: Mobile computing with FreeBSD <freebsd-mobile.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-mobile>,
	<mailto:freebsd-mobile-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-mobile>
List-Post: <mailto:freebsd-mobile@freebsd.org>
List-Help: <mailto:freebsd-mobile-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-mobile>,
	<mailto:freebsd-mobile-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Thu, 11 Nov 2004 07:47:19 -0000

Greetings list,

Well here is my problem, I have a gigabyte pci wireless network card, I
cannot for the life of me find any more information on it from any
websites including the gigabyte website itself. My issue is that freebsd
4.10-STABLE will not see the card, i have tried everything i can find on
google and the freebsd websites and to no avail still do not have it
working, please find below a dmesg output, ifconfig output, kernel
config and uname output.

Thanks for any help anyone could offer.

kind regards,

Greg

## Dmesg

root@intraweb:/dev #> dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 4.10-STABLE #1: Tue Sep 28 20:49:56 SAST 2004
    root@intraweb.propdata.co.za:/usr/obj/usr/src/sys/INTRAWEB
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Celeron (634.78-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268435456 (262144K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di fdc0
config> q
avail memory = 255754240 (249760K bytes)
Preloaded elf kernel "kernel" at 0xc0551000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc055109c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fdcd0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Mach64-GZ graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0x6400-0x640f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x6800-0x681f irq 10 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x6c00-0x6c1f irq 10 at device
7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
chip1: <VIA 82C686 AC97 Audio> port
0x7800-0x7803,0x7400-0x7403,0x7000-0x70ff irq 12 at device 7.5 on pci0
pci0: <unknown card> (vendor=0x1814, dev=0x0201) at 10.0 irq 12
rl0: <RealTek 8139 10/100BaseTX> port 0x7c00-0x7cff mem
0xe7002000-0xe70020ff irq 9 at device 11.0 on pci0
rl0: Ethernet address: 00:08:a1:45:1f:e2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem
0xe7003000-0xe70030ff irq 11 at device 12.0 on pci0
rl1: Ethernet address: 00:08:a1:45:21:e4
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
eisa0: <EISA bus> on motherboard
eisa0: unknown card FP@0000 (0x1a000000) at slot 7
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xd0000-0xd7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, logging limited to 100 packets/entry by
default
BRIDGE 020214 loaded
ad0: 38166MB <ST340015A> [77545/16/63] at ata0-master UDMA66
ad1: 76319MB <ST380011A> [155061/16/63] at ata0-slave UDMA66
acd0: CDROM <IDE/ATAPI CD-ROM 44XS> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
rl0: promiscuous mode enabled

## ifconfig

root@intraweb:/dev #> ifconfig
rl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
        inet6 fe80::208:a1ff:fe45:1fe2%rl0 prefixlen 64 scopeid 0x1
        ether 00:08:a1:45:1f:e2
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 172.16.10.2 netmask 0xffff0000 broadcast 172.16.255.255
        inet6 fe80::208:a1ff:fe45:21e4%rl1 prefixlen 64 scopeid 0x2
        ether 00:08:a1:45:21:e4
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500


## kernel

root@intraweb:/dev #> cat /usr/src/sys/i386/conf/INTRAWEB
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#   
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you
are
# in doubt as to the purpose or necessity of a line, check first in
LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.48 2002/08/31 20:28:26
obrien Exp $
 
machine         i386
cpu             I386_CPU
cpu             I486_CPU
cpu             I586_CPU
cpu             I686_CPU
ident           GENERIC
maxusers        0
 
#makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug
symbols
 
options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep
this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_DIRHASH             #Improve performance on big
directories
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS
required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660
required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP
THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing
SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time
extensions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in
debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in
debug
                                        # output.  Adds ~215k to driver.
 
# To make an SMP kernel, the next two are needed
#options        SMP                     # Symmetric MultiProcessor
Kernel
#options        APIC_IO                 # Symmetric (APIC) I/O
 
device          isa
device          eisa
device          pci
 
# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0
device          fd1     at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device         fdc0
 
# ATA and ATAPI devices
device          ata0    at isa? port IO_WD1 irq 14
device          ata1    at isa? port IO_WD2 irq 15
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
device          atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering
 
# SCSI Controllers
device          ahb             # EISA AHA1742 family
device          ahc             # AHA2940 and onboard AIC7xxx devices
device          ahd             # AHA39320/29320 and onboard AIC79xx
devices
device          amd             # AMD 53C974 (Tekram DC-390(T))
device          isp             # Qlogic family
device          mpt             # LSI-Logic MPT/Fusion
device          ncr             # NCR/Symbios Logic
device          sym             # NCR/Symbios Logic (newer chipsets)
options         SYM_SETUP_LP_PROBE_MAP=0x40
                                # Allow ncr to attach legacy NCR devices
when
                                # both sym and ncr are configured
 
device          adv0    at isa?
device          adw
device          bt0     at isa?
device          aha0    at isa?
device          aic0    at isa?
 
device          ncv             # NCR 53C500
device          nsp             # Workbit Ninja SCSI-3
device          stg             # TMC 18C30/18C50
 
# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI
access)
 
# RAID controllers interfaced to the SCSI subsystem
device          asr             # DPT SmartRAID V, VI and Adaptec SCSI
RAID
device          dpt             # DPT Smartcache - See LINT for options!
device          iir             # Intel Integrated RAID
device          mly             # Mylex AcceleRAID/eXtremeRAID
device          ciss            # Compaq SmartRAID 5* series
 
# RAID controllers
device          aac             # Adaptec FSA RAID, Dell PERC2/PERC3
device          aacp            # SCSI passthrough for aac (requires
CAM)
device          ida             # Compaq Smart RAID
device          amr             # AMI MegaRAID
device          mlx             # Mylex DAC960 family
device          twe             # 3ware Escalade
 
# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1
device          psm0    at atkbdc? irq 12
 
device          vga0    at isa?
 
# splash screen/screen saver
pseudo-device   splash
 
# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? flags 0x100
 
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device         vt0     at isa?
#options        XSERVER                 # support for X server on a vt
console
#options        FAT_CURSOR              # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
#options        PCVT_SCANSET=2          # IBM keyboards are non-std
 
# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13
 
# Power management support (see LINT for more options)
device          apm0    at nexus? disable flags 0x20 # Advanced Power
Management
 
# PCCARD (PCMCIA) support
device          card
device          pcic0   at isa? irq 0 port 0x3e0 iomem 0xd0000
device          pcic1   at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
 
# Serial (COM) ports
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3
device          sio2    at isa? disable port IO_COM3 irq 5
device          sio3    at isa? disable port IO_COM4 irq 9
 
# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da
 
 
# PCI Ethernet NICs.
device          de              # DEC/Intel DC21x4x (``Tulip'')
device          em              # Intel PRO/1000 adapter Gigabit
Ethernet Card (``Wiseman'')
device          txp             # 3Com 3cR990 (``Typhoon'')
device          vx              # 3Com 3c590, 3c595 (``Vortex'')
 
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device          miibus          # MII bus support
device          dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557,
82558)
device          pcn             # AMD Am79C97x PCI 10/100 NICs
device          rl              # RealTek 8129/8139
device          sf              # Adaptec AIC-6915 (``Starfire'')
device          sis             # Silicon Integrated Systems SiS 900/SiS
7016
device          ste             # Sundance ST201 (D-Link DFE-550TX)
device          tl              # Texas Instruments ThunderLAN
device          tx              # SMC EtherPower II (83c170 ``EPIC'')
device          vr              # VIA Rhine, Rhine II
device          wb              # Winbond W89C840F
device          xl              # 3Com 3c90x (``Boomerang'',
``Cyclone'')
device          bge             # Broadcom BCM570x (``Tigon III'')
 
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device          ed0     at isa? port 0x280 irq 10 iomem 0xd8000
device          ex
device          ep
device          fe0     at isa? port 0x300
# Xircom Ethernet
device          xe
# PRISM I IEEE 802.11b wireless NIC.
device          awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device          wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below
will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device          an
# The probe order of these is presently determined by
i386/isa/isa_compat.c.
device          ie0     at isa? port 0x300 irq 10 iomem 0xd0000
#device         le0     at isa? port 0x300 irq 5 iomem 0xd0000
device          lnc0    at isa? port 0x280 irq 10 drq 0
device          cs0     at isa? port 0x300
device          sn0     at isa? port 0x300 irq 10
 
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
pseudo-device   tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif             # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)
 
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf             #Berkeley packet filter
 
# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus
and da
device          ums             # Mouse
device          uscanner        # Scanners
device          urio            # Diamond Rio MP3 Player
# USB Ethernet, requires mii
device          aue             # ADMtek USB ethernet
device          cue             # CATC USB ethernet
device          kue             # Kawasaki LSI USB ethernet
 
options         RANDOM_IP_ID
options         MROUTING                # Multicast routing
options         IPFIREWALL              #firewall
options         IPFIREWALL_VERBOSE      #enable logging to syslogd(8)
options         IPFIREWALL_FORWARD      #enable transparent proxy
support
options         IPFIREWALL_VERBOSE_LIMIT=100    #limit verbosity
options         IPFIREWALL_DEFAULT_TO_ACCEPT    #allow everything by
default
options         IPDIVERT                 #  IPDIVERT enables the divert
IP sockets, used by ''ipfw divert''
options         ACCEPT_FILTER_DATA
options         ACCEPT_FILTER_HTTP
options         IPSTEALTH               #support for stealth forwarding
options         TCPDEBUG
options         TCP_DROP_SYNFIN         #drop TCP packets with SYN+FIN
options         DUMMYNET
options         BRIDGE
options         HZ=1000


## uname -a

root@intraweb:/dev #> uname -a
FreeBSD intraweb.propdata.co.za 4.10-STABLE FreeBSD 4.10-STABLE #1: Tue
Sep 28 20:49:56 SAST 2004    
root@intraweb.propdata.co.za:/usr/obj/usr/src/sys/INTRAWEB  i386