Date: Wed, 3 Oct 2012 23:35:00 +0200 From: Guido van Rooij <guido@gvr.org> To: freebsd-usb@freebsd.org Subject: Re: usb3 umass device on usb2 port not recognised Message-ID: <20121003213459.GA27522@gvr.gvr.org> In-Reply-To: <20121003200529.GA26591@gvr.gvr.org> References: <20121003200529.GA26591@gvr.gvr.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Oct 03, 2012 at 10:05:29PM +0200, Guido van Rooij wrote: > I have a 2.5" external USB3 disk that works fine on a USB2 port on a > Windows7 system, but under FreeBSD 8.3-RELEASE-p3 it is not recognised at all. > When I plug it in, all I get is: > ugen5.2: <Unknown> at usbus5 (disconnected) > I get similar results on other USB ports. > usbconfig list does not show the device: > beck# usbconfig list > ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE > ugen4.1: <UHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen5.1: <UHCI root HUB Intel> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen6.1: <UHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen7.1: <EHCI root HUB Intel> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE > ugen0.2: <BCM2046B1 Broadcom> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen2.2: <5880 Broadcom Corp> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON > ugen0.3: <product 0x8157 vendor 0x413c> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON > ugen0.4: <product 0x8158 vendor 0x413c> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON > > > beck# usbconfig -u 5 -a 2 dump_info > No device match or lack of permissions. When I attach a usb-hub (no external power) and then attach the device, I get a little further: ugen7.2: <vendor 0x0409> at usbus7 uhub9: <vendor 0x0409 product 0x0059, class 9/0, rev 2.00/1.00, addr 2> on usbus7 uhub9: 4 ports with 4 removable, self powered ugen7.3: <PLATINUM> at usbus7 umass0: <PLATINUM My Drive 2.5, class 0/0, rev 2.10/1.00, addr 3> on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x4100 umass0:2:0:-1: Attached to scbus2 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <ASMT 2105 0> Removable Direct Access SCSI-5 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present Needless to say the device is a fixed disk, and has no changeable media. -Guido
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20121003213459.GA27522>