From owner-freebsd-ppc@FreeBSD.ORG Thu Dec 2 19:30:29 2010 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4D36210656CF; Thu, 2 Dec 2010 19:30:29 +0000 (UTC) (envelope-from paul@gromit.dlib.vt.edu) Received: from lennier.cc.vt.edu (lennier.cc.vt.edu [198.82.162.213]) by mx1.freebsd.org (Postfix) with ESMTP id CE9998FC18; Thu, 2 Dec 2010 19:30:28 +0000 (UTC) Received: from steiner.cc.vt.edu (steiner.cc.vt.edu [198.82.163.51]) by lennier.cc.vt.edu (8.13.8/8.13.8) with ESMTP id oB2JTuHe010780; Thu, 2 Dec 2010 14:29:58 -0500 Received: from auth3.smtp.vt.edu (EHLO auth3.smtp.vt.edu) ([198.82.161.152]) by steiner.cc.vt.edu (MOS 4.2.2-FCS FastPath queued) with ESMTP id MLO90232; Thu, 02 Dec 2010 14:29:57 -0500 (EST) Received: from pmather.tower.lib.vt.edu (pmather.tower.lib.vt.edu [128.173.51.28]) (authenticated bits=0) by auth3.smtp.vt.edu (8.13.8/8.13.8) with ESMTP id oB2JTvbU003284 (version=TLSv1/SSLv3 cipher=AES128-SHA bits=128 verify=NO); Thu, 2 Dec 2010 14:29:57 -0500 Mime-Version: 1.0 (Apple Message framework v1082) Content-Type: text/plain; charset=us-ascii From: Paul Mather In-Reply-To: <4CEBDB9D.2010309@freebsd.org> Date: Thu, 2 Dec 2010 14:29:57 -0500 Content-Transfer-Encoding: quoted-printable Message-Id: <15A958D9-5CBE-4830-B72C-CC4DF2192BC0@gromit.dlib.vt.edu> References: <5A677521-DE86-4BA9-BA85-8003957551B5@freebsd.org> <4CEBDB9D.2010309@freebsd.org> To: Nathan Whitehorn X-Mailer: Apple Mail (2.1082) X-Mirapoint-Received-SPF: 198.82.161.152 auth3.smtp.vt.edu paul@gromit.dlib.vt.edu 5 none X-Mirapoint-IP-Reputation: reputation=neutral-1, source=Fixed, refid=n/a, actions=MAILHURDLE SPF TAG X-Junkmail-Status: score=10/50, host=steiner.cc.vt.edu X-Junkmail-Signature-Raw: score=unknown, refid=str=0001.0A020208.4CF7F3B6.0012,ss=1,fgs=0, ip=0.0.0.0, so=2010-07-22 22:03:31, dmn=2009-09-10 00:05:08, mode=single engine X-Junkmail-IWF: false Cc: yongari@freebsd.org, freebsd-ppc@freebsd.org Subject: Re: New powerpc64 snapshot X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2010 19:30:29 -0000 On Nov 23, 2010, at 10:19 AM, Nathan Whitehorn wrote: > On 11/22/10 14:34, Paul Mather wrote: >> On Nov 18, 2010, at 9:50 AM, Nathan Whitehorn wrote: >>=20 >>> I've prepared some new powerpc64 snapshot ISOs which can be found >>> at >>> = http://people.freebsd.org/~nwhitehorn/FreeBSD-9.0-20101118-SNAP-powerpc64/= >>>=20 >>>=20 >>>=20 >>=20 >> I was able successfully to install this snapshot today on an Xserve >> G5. I had several problems, though: >>=20 >> 1) I could not boot from the bootloader script after the install was >> complete; I had forcibly to "setenv boot-device hd:,\ppc\boot1.elf" >> for the system to boot into FreeBSD from power-on. (I did remember >> the "gpart bootcode ..." step, too.) >=20 > I'm guessing you are booting on a serial console? I don't have the = Forth > skills to make the bootinfo script detect where the 'screen' device > exists, so it defaults to that. It's not really a big problem because the workaround functions = flawlessly. >> 2) Usually, the system will not boot multi-user as it is unable to >> mount the root partition after booting the kernel. Dropping into the >> debugger and issuing a "reboot" to do a warm boot will allow the >> system then to boot multi-user successfully. >=20 > Could you do a verbose boot (boot -v at the boot prompt) and send the > resulting dmesg? There is some issue with the built-in serverworks = SATA > controller and some hard drives that no one has been able to track = down > yet. It doesn't affect anything once the machine has booted. Since I built a new kernel using updated sources I haven't really = noticed the problem as much. My rebuilt kernel does have WITNESS = disabled. Verbose boot output is included at the end of this message. >> 3) The system is LOUD! It sounds like the fans are running high >> pretty much all the time---running much higher than Mac OS X 10.5 >> runs them. I notice a "fcu" fan-related device during boot. Is >> there any way to force the fans to run at a lower speed? I'm going >> to go deaf at this rate. :-) >=20 > Andreas Tobler has some in-flight thermal monitoring code he posted to > the list a while ago, and one thermal monitor chip is still not in the > tree. Even without the patches, you can turn down the fans by hand = with > sysctls on dev.fcu. The fan situation is bizarre. I couldn't find a man page for device fcu = so I looked at the sysctls. There are a bunch of = dev.fcu.0.fans.*.{minrpm,maxrpm,rpm} sysctls associated with cpu_a, = cpu_b, sys_ctrlr_fan and pci_fan. I initially figured that lowering = dev.fcu.0.fans.*.maxrpm from the 14000 shown would limit the noise. = However, that sysctl is read-only, and trying to set it in = /boot/loader.conf appeared to have no effect: the values stayed = resolutely at 14000. Is there some other way to set this, or is it = hard-coded? I could set a value for dev.fcu.0.fans.*.rpm though it wasn't clear what = the precise correlation was between the value set and the resultant fan = RPM. It did have some effect. In any case, the value didn't stay at = the set value, and the fans eventually began racing again. Actually, = when I say "the fans" it seemed only to be sys_ctrlr_fan and pci_fan. = The various CPU fans appeared to hover around ~6000 rpm according to the = sysctls. The really bizarre thing, though, is that when the fans begin racing and = the noise is loud, simply executing "sysctl dev.fcu.0.fans" is enough to = calm them down to a more manageable 5600--6400 RPM! So, as a temporary = workaround (to preserve my hearing whilst working on the system:) I've = added this to /etc/crontab: # Try and keep the fans from racing */2 * * * * root /sbin/sysctl = dev.fcu.0.fans > /dev/null 2>&1 Does anyone have any information as to the correct way of wrangling the = fan RPM? Using the bizarre crontab entry above keeps the noise at a = reasonable level and the temperature at this fairly steady value: dev.max6690.0.sensor.sys_ctrlr_ambient.temp: 35.6C dev.max6690.0.sensor.sys_ctrlr_internal.temp: 49.2C But, like I said, it seems like a bizarre solution. >> 4) After a while, my system fell of the network with "bge0: watchdog >> timeout -- resetting" being output on the console periodically. >=20 > Odd. I've CC'ed Pyun Yong Hyeon, who maintains the bge driver. Maybe = he > has some ideas. Touch wood, but since rebuilding the kernel with newer sources I've not = noticed this problem again. >> 5) A minor thing, but the "locate" command doesn't work properly. >> Either it doesn't find something I know is there, or it finds >> something but prints out incorrect gibberish as a result (e.g., just >> printing out lines of "/" in response to a "locate etc"). >=20 > I just fixed this in svn. You'll need to update your sources to get = the > fixed version. Many thanks! It's working properly now. >> I realise the FreeBSD/powerpc64 port is experimental at this point. >> Can anyone tell me if the above symptoms afflict the 32-bit >> FreeBSD/powerpc 8-STABLE port? Although I like the idea of the >> powerpc64 port allowing me to use all of the 3.5 GB RAM in this >> machine, at this point it is more important for me to trade away the >> extra RAM for stability (and *quietness*:). If FreeBSD/powerpc >> 8-STABLE is more solid, I'd rather switch to that, as I'd like to get >> this machine back into service. >>=20 >> (I would be more prepared to soldier on with FreeBSD/powerpc64 if I >> could get the fan noise problem under control. That would let me do >> more testing without going crazy from the noise.:) >=20 > All of the problems you mentioned above are also present with a 32-bit > system. I'll keep on with FreeBSD/powerpc64, then. Is ZFS supported? Is = booting from a ZFS pool supported, or do you need to do the /boot-on-UFS = workaround from before the boot loader could boot from ZFS pools to get = a largely ZFS-only system? Cheers, Paul. =3D=3D=3D=3D=3D Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0: Mon Nov 29 13:57:07 EST 2010 pmather@bunty.dlib.vt.edu:/usr/obj/usr/src/sys/BUNTY powerpc Preloaded elf kernel "/boot/kernel/kernel" at 0xa0e000. cpu0: IBM PowerPC 970FX revision 3.0, 2300.26 MHz cpu0: Features dc000000 cpu0: HID0 511081 real memory =3D 4276629504 (4078 MB) available KVA =3D 7461375999 (7115 MB) Physical memory chunk(s): 0x 18000 - 0x fffff, 950272 bytes (232 pages) 0x e1d000 - 0x 17fffff, 10366976 bytes (2531 pages) 0x 1813000 - 0x 1bfffff, 4116480 bytes (1005 pages) 0x 32bc000 - 0x 3ffffff, 13910016 bytes (3396 pages) 0x 8000000 - 0x 7f7effff, 2004811776 bytes (489456 pages) 0x 100000000 - 0x 174bcffff, 1958543360 bytes (478160 pages) avail memory =3D 3974053888 (3789 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0: dev=3Dff88ed18 (BSP) cpu1: dev=3Dff890150 ULE: setup cpu 0 ULE: setup cpu 1 null: random: openfirm: kbd0 at kbdmux0 mem: nfslock: pseudo-device nexus0: cpulist0: on nexus0 cpu0: on cpulist0 pcr0: on cpu0 pcr0: No power mode data in device tree! device_attach: pcr0 attach returned 6 cpu1: on cpulist0 pcr1: on cpu1 pcr1: No power mode data in device tree! device_attach: pcr1 attach returned 6 sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type memory (no driver attached) sc1: no video adapter found. nexus0: , type BootROM (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type nvram (no driver attached) sc1: no video adapter found. unin0: on nexus0 unin0: Version 53 iichb0: mem 0xf8001000-0xf8001fff irq 0 on = unin0 unin mapdev: start f8001000, len 4095 iichb0: Revision: A2 iicbus0: on iichb0 iicbus0: at addr 0xd4 max66900: at addr 0x98 on iicbus0 fcu0: at addr 0x15e on iicbus0 iicbus0: at addr 0x30 iicbus0: at addr 0x58 iicbus0: at addr 0xa0 iicbus0: at addr 0x32 iicbus0: at addr 0x5a iicbus0: at addr 0xa2 iicbus0: at addr 0x1c0 unin0: mem 0xf8033000-0xf8039fff (no driver attached) htpic0: mem 0xf8040000-0xf807ffff irq 312 = on unin0 unin mapdev: start f8040000, len 262143 htpic0: Version 1.2, supports 4 CPUs and 124 irqs sc1: no video adapter found. pcib0: on nexus0 pci0: on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x106b, dev=3D0x0059, revid=3D0x00 domain=3D0, bus=3D0, slot=3D11, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0016, statreg=3D0x22b0, cachelnsz=3D8 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) agp0: on hostb0 agp0: allocating GATT for aperture of size 256M sc1: no video adapter found. pcib1: on nexus0 pcib1: 4 HT IRQs on device 1.0 pcib1: 4 HT IRQs on device 2.0 pcib1: 86 HT IRQs on device 3.0 pci1: on pcib1 pci1: domain=3D1, physical bus=3D0 found-> vendor=3D0x1022, dev=3D0x7450, revid=3D0x12 domain=3D1, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x1022, dev=3D0x7450, revid=3D0x12 domain=3D1, bus=3D0, slot=3D2, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x106b, dev=3D0x0045, revid=3D0x00 domain=3D1, bus=3D0, slot=3D3, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x106b, dev=3D0x0046, revid=3D0x00 domain=3D1, bus=3D0, slot=3D4, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x106b, dev=3D0x0047, revid=3D0x00 domain=3D1, bus=3D0, slot=3D5, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x106b, dev=3D0x0048, revid=3D0x00 domain=3D1, bus=3D0, slot=3D6, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x106b, dev=3D0x0049, revid=3D0x00 domain=3D1, bus=3D0, slot=3D7, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) pcib2: at device 1.0 on pci1 pcib2: domain 1 pcib2: secondary bus 6 pcib2: subordinate bus 6 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pci2: on pcib2 pci2: domain=3D1, physical bus=3D6 pcib3: at device 2.0 on pci1 pcib3: domain 1 pcib3: secondary bus 7 pcib3: subordinate bus 7 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0x90000000-0x900fffff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=3D1, physical bus=3D7 found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x03 domain=3D1, bus=3D7, slot=3D4, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D0 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0x90030000, size 16, = enabled pcib3: requested memory range 0x90030000-0x9003ffff: good map[18]: type Memory, range 64, base 0x90020000, size 16, = enabled pcib3: requested memory range 0x90020000-0x9002ffff: good found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x03 domain=3D1, bus=3D7, slot=3D4, func=3D1 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 = (0 ns) intpin=3Db, irq=3D0 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0x90010000, size 16, = enabled pcib3: requested memory range 0x90010000-0x9001ffff: good map[18]: type Memory, range 64, base 0x90000000, size 16, = enabled pcib3: requested memory range 0x90000000-0x9000ffff: good bge0: mem = 0x90030000-0x9003ffff,0x90020000-0x9002ffff irq 310 at device 4.0 on = pci3 cpcht mapdev: start 90030000, len 65536 bge0: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI-X miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0019, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: 00:0d:93:9d:2f:82 bge1: mem = 0x90010000-0x9001ffff,0x90000000-0x9000ffff irq 313 at device 4.1 on = pci3 cpcht mapdev: start 90010000, len 65536 bge1: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI-X miibus1: on bge1 brgphy1: PHY 1 on miibus1 brgphy1: OUI 0x000818, model 0x0019, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: bpf attached bge1: Ethernet address: 00:0d:93:9d:2f:83 pcib4: at device 3.0 on pci1 pcib4: domain 1 pcib4: secondary bus 1 pcib4: subordinate bus 1 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0x80000000-0x800fffff pcib4: no prefetched decode pci4: on pcib4 pci4: domain=3D1, physical bus=3D1 found-> vendor=3D0x106b, dev=3D0x0041, revid=3D0x60 domain=3D1, bus=3D1, slot=3D7, func=3D0 class=3Dff-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D16 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) map[10]: type Memory, range 32, base 0x80000000, size 19, = enabled pcib4: requested memory range 0x80000000-0x8007ffff: good macio0: mem 0x80000000-0x8007ffff at device = 7.0 on pci4 openpic0: mem 0x40000-0x7ffff on macio0 openpic0: Version 1.2, supports 4 CPUs and 120 irqs macgpio0: mem 0x50-0x8a on macio0 macgpio0: gpio 9 irq 303 (no driver attached) macgpio0: gpio 17 irq 311 (no driver attached) macgpio0: gpio 8 irq 302 (no driver attached) macgpio0: gpio 11 (no driver attached) macgpio0: gpio 12 irq 306 (no driver attached) macgpio0: gpio 13 irq 307 (no driver attached) macgpio0: gpio 21 irq 315 (no driver attached) macgpio0: gpio 23 irq 317 (no driver attached) macgpio0: gpio 28 (no driver attached) macgpio0: gpio 29 (no driver attached) macgpio0: gpio 35 irq 329 (no driver attached) macgpio0: gpio 58 (no driver attached) scc0: mem = 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff = irq 278,261,262,279,263,264 on macio0 scc0: not resetting hardware uart0: on scc0 uart0: fast interrupt uart0: console (57600,n,8,1) uart1: on scc0 uart1: fast interrupt scc0: fast interrupt iichb1: mem 0x18000-0x18fff irq 282 on macio0 iichb1: Revision: A1 iicbus1: on iichb1 iicbus1: at addr 0x5a iicbus1: at addr 0x5c iicbus1: at addr 0x90 iicbus1: at addr 0x94 iicbus1: at addr 0x1c0 macio0: mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq = 286,257,258 (no driver attached) pmu0: mem 0x16000-0x17fff irq 281 on macio0 pmu0: PMU child pmu0: PMU child pmu0: PMU child pmu0: registered as a time-of-day clock (resolution 1000us, adjustment = 0.000500000s) pcib5: at device 4.0 on pci1 pcib5: domain 1 pcib5: secondary bus 2 pcib5: subordinate bus 2 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0x80100000-0x801fffff pcib5: no prefetched decode pci5: on pcib5 pci5: domain=3D1, physical bus=3D2 found-> vendor=3D0x1033, dev=3D0x0035, revid=3D0x43 domain=3D1, bus=3D2, slot=3D11, func=3D0 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D16 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x01 (250 ns), maxlat=3D0x2a = (10500 ns) intpin=3Da, irq=3D0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80102000, size 12, = enabled pcib5: requested memory range 0x80102000-0x80102fff: good found-> vendor=3D0x1033, dev=3D0x0035, revid=3D0x43 domain=3D1, bus=3D2, slot=3D11, func=3D1 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D16 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x01 (250 ns), maxlat=3D0x2a = (10500 ns) intpin=3Db, irq=3D0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80101000, size 12, = enabled pcib5: requested memory range 0x80101000-0x80101fff: good found-> vendor=3D0x1033, dev=3D0x00e0, revid=3D0x04 domain=3D1, bus=3D2, slot=3D11, func=3D2 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0004, statreg=3D0x0210, cachelnsz=3D16 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x10 (4000 ns), maxlat=3D0x22 = (8500 ns) intpin=3Dc, irq=3D0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80100000, size 8, memory = disabled pcib5: requested memory range 0x80100000-0x801000ff: good ohci0: mem 0x80102000-0x80102fff irq 319 = at device 11.0 on pci5 cpcht mapdev: start 80102000, len 4096 usbus0: on ohci0 usbus0: bpf attached ohci0: usbpf attached ohci1: mem 0x80101000-0x80101fff irq 319 = at device 11.1 on pci5 cpcht mapdev: start 80101000, len 4096 usbus1: on ohci1 usbus1: bpf attached ohci1: usbpf attached ehci0: mem 0x80100000-0x801000ff irq = 319 at device 11.2 on pci5 cpcht mapdev: start 80100000, len 256 usbus2: EHCI version 1.0 usbus2: on ehci0 usbus2: bpf attached ehci0: usbpf attached pcib6: at device 5.0 on pci1 pcib6: domain 1 pcib6: secondary bus 3 pcib6: subordinate bus 3 pcib6: I/O decode 0xf000-0xfff pcib6: memory decode 0x80200000-0x802fffff pcib6: no prefetched decode pci6: on pcib6 pci6: domain=3D1, physical bus=3D3 found-> vendor=3D0x106b, dev=3D0x0043, revid=3D0x00 domain=3D1, bus=3D3, slot=3D13, func=3D0 class=3Dff-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0014, statreg=3D0x0200, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) map[10]: type Memory, range 32, base 0x80204000, size 14, memory = disabled pcib6: requested memory range 0x80204000-0x80207fff: good found-> vendor=3D0x106b, dev=3D0x0042, revid=3D0x00 domain=3D1, bus=3D3, slot=3D14, func=3D0 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D16 (dwords) lattimer=3D0xf8 (7440 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x18 = (6000 ns) intpin=3Da, irq=3D0 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0x80200000, size 12, = enabled pcib6: requested memory range 0x80200000-0x80200fff: good cpcht mapdev: start 80204000, len 16384 ata0: mem 0x80204000-0x80207fff irq 295 at = device 13.0 on pci6 ata0: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00 ata0: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x10000 fwohci0: vendor=3D106b, dev=3D42 fwohci0: vendor=3D106b, dev=3D42 fwohci0: <1394 Open Host Controller Interface> mem 0x80200000-0x80200fff = irq 296 at device 14.0 on pci6 cpcht mapdev: start 80200000, len 4096 fwohci0: OHCI version 1.0 (ROM=3D0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:0d:93:ff:fe:c5:cd:50 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:0d:93:c5:cd:50 fwe0: bpf attached fwe0: Ethernet address: 02:0d:93:c5:cd:50 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000001, SelfID Count=3D2, = CYCLEMASTER mode pcib7: at device 6.0 on pci1 pcib7: domain 1 pcib7: secondary bus 4 pcib7: subordinate bus 4 pcib7: I/O decode 0xf000-0xfff pcib7: memory decode 0x80300000-0x805fffff pcib7: no prefetched decode pci7: on pcib7 pci7: domain=3D1, physical bus=3D4 found-> vendor=3D0x106b, dev=3D0x004c, revid=3D0x00 domain=3D1, bus=3D4, slot=3D15, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0004, statreg=3D0x84a0, cachelnsz=3D16 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x40 = (16000 ns) intpin=3Da, irq=3D255 map[10]: type Memory, range 32, base 0x80400000, size 21, memory = disabled pcib7: requested memory range 0x80400000-0x805fffff: good gem0: mem 0x80400000-0x805fffff at device 15.0 = on pci7 gem0: failed to allocate resources device_attach: gem0 attach returned 6 pcib8: at device 7.0 on pci1 pcib8: domain 1 pcib8: secondary bus 5 pcib8: subordinate bus 5 pcib8: I/O decode 0xf000-0xfff pcib8: memory decode 0x80600000-0x806fffff pcib8: no prefetched decode pci8: on pcib8 pci8: domain=3D1, physical bus=3D5 found-> vendor=3D0x1166, dev=3D0x0240, revid=3D0x00 domain=3D1, bus=3D5, slot=3D12, func=3D0 class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) map[10]: type I/O Port, range 32, base 0, size 3, port disabled map[14]: type I/O Port, range 32, base 0, size 2, port disabled map[18]: type I/O Port, range 32, base 0, size 3, port disabled map[1c]: type I/O Port, range 32, base 0, size 2, port disabled map[20]: type I/O Port, range 32, base 0, size 4, port disabled map[24]: type Memory, range 32, base 0x80600000, size 13, = enabled pcib8: requested memory range 0x80600000-0x80601fff: good found-> vendor=3D0x1166, dev=3D0x0240, revid=3D0x00 domain=3D1, bus=3D5, slot=3D12, func=3D1 class=3D01-01-85, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0004, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x10 (480 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) map[10]: type I/O Port, range 32, base 0, size 8, port disabled map[14]: type I/O Port, range 32, base 0, size 2, port disabled map[18]: type I/O Port, range 32, base 0, size 3, port disabled map[1c]: type I/O Port, range 32, base 0, size 2, port disabled map[20]: type I/O Port, range 32, base 0, size 4, port disabled map[24]: type Memory, range 32, base 0, size 13, memory disabled atapci0: mem 0x80600000-0x80601fff = irq 256 at device 12.0 on pci8 atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0 cpcht mapdev: start f4000000, len 16 cpcht mapdev: start 80600000, len 8192 ata2: on atapci0 ata2: hardware reset ... ata2: SATA connect time=3D10ms status=3D00000113 ata2: reset tp1 mask=3D01 ostat0=3Dd0 ostat1=3D00 ata2: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata2: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1 ata3: on atapci0 ata3: hardware reset ... ata3: SATA connect timeout status=3D00000004 ata4: on atapci0 ata4: hardware reset ... ata4: SATA connect timeout status=3D00000004 ata5: on atapci0 ata5: hardware reset ... ata5: SATA connect timeout status=3D00000004 atapci1: at device 12.1 on pci8 pcib1: failed to reserve resource for atapci1 atapci1: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). atapci1: unable to map interrupt device_attach: atapci1 attach returned 6 sc1: no video adapter found. nexus0: , type vsp (no driver attached) sc1: no video adapter found. nexus0: , type spu (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc1: no video adapter found. nexus0: , type (unknown) (no driver attached) sc0: no video adapter found. nexus0: , type (unknown) (no driver attached) procfs registered Timecounter "timebase" frequency 33333333 Hz quality 0 Event timer "decrementer" frequency 33333333 Hz quality 1000 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached ata0: Identifying devices: 00010000 ata0: New devices: 00010000 firewire0: 2 nodes, maxhop <=3D 1 cable IRM irm(1) (me)=20 firewire0: bus manager 1=20 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire acd0: setting UDMA33 acd0: CDRW drive at ata0 as master acd0: read 4133KB/s (4133KB/s) write 4133KB/s (4133KB/s), 2048KB buffer, = UDMA33=20 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2: Identifying devices: 00000001 ata2: New devices: 00000001 ata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D40 wire ad0: setting UDMA100 ad0: 78533MB at ata2-master UDMA100 = SATA 1.5Gb/s ad0: 160836480 sectors [159560C/16H/63S] 16 sectors/interrupt 1 depth = queue ata3: Identifying devices: 00000000 ata3: New devices: 00000000 ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 max66900: 2 sensors detected. max66900: Sensors max66900: Location : SYS CTRLR AMBIENT ID: 0 max66900: Location : SYS CTRLR INTERNAL ID: 1 fcu0: FCU initialized, RPM shift: 2 fcu0: 8 fans detected! fcu0: Fans fcu0: Location: CPU A 1 type: 0 ID: 1 RPM: 5952 fcu0: Location: CPU A 2 type: 0 ID: 2 RPM: 5952 fcu0: Location: CPU A 3 type: 0 ID: 3 RPM: 5952 fcu0: Location: CPU B 1 type: 0 ID: 4 RPM: 6016 fcu0: Location: CPU B 2 type: 0 ID: 5 RPM: 5952 fcu0: Location: CPU B 3 type: 0 ID: 6 RPM: 5952 fcu0: Location: SYS CTRLR FAN type: 1 ID: 1 RPM: 6336 fcu0: Location: PCI FAN type: 1 ID: 2 RPM: 5568 uhub1: 2 ports with 2 removable, self powered uhub0: 3 ports with 3 removable, self powered GEOM: new disk ad0 uhub2: 5 ports with 5 removable, self powered (probe0:sbp0:0:0:0): Error 22, Unretryable error (probe1:sbp0:0:1:0): Error 22, Unretryable error (probe2:sbp0:0:2:0): Error 22, Unretryable error (probe3:sbp0:0:3:0): Error 22, Unretryable error (probe4:sbp0:0:4:0): Error 22, Unretryable error (probe5:sbp0:0:5:0): Error 22, Unretryable error (probe6:sbp0:0:6:0): Error 22, Unretryable error Waking up CPU 1 (dev=3Dff890150) Adding CPU 1, pir=3D2, awake=3D1 Adding CPU 0, pir=3D0, awake=3D1 SMP: AP CPU #1 launched Trying to mount root from ufs:/dev/ad0s3 [rw]... start_init: trying /sbin/init