Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 30 Nov 2004 10:21:28 +0100
From:      Espen Tagestad <espent@totem.fix.no>
To:        freebsd-mobile@freebsd.org
Subject:   ACPI differences 4.10 - 5.3, laptop problem
Message-ID:  <20041130092128.GA79054@totem.fix.no>

next in thread | raw e-mail | index | archive | help
Hi,

I have run FreeBSD 4 on my laptop for a couple of years know, and as
ACPI was included in 4.9 (or was it 4.10) I was quite satisfied with the
situation. Now, I've upgraded to 5.3 on ACPI is no longer working. With
acpi enabled, the laptop starts but after 10-15 seconds it stops and
won't respond to anything. Currently it runs without ACPI with the
thermal coolers on full speed. It's irritating, and it'll probably eat
up the batteries much faster than running with ACPI.

 * Is there any tunable options to get ACPI working?
 * What is the differences with ACPI on FreeBSD 4 vs 5?
 * Can I run FreeBSD 4-ACPI on FreeBSD 5?

My laptop is a Acer Travelmate 630-series. dmesg out is as follows (with
ACPI disabled):

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 5.3-STABLE #1: Sun Nov 28 15:59:56 UTC 2004
    root@:/usr/obj/usr/src/sys/LEFSE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1560.22-MHz 686-class
CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 535756800 (510 MB)
avail memory = 518795264 (494 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Ali Generic host to PCI bridge> mem 0xf0000000-0xf7ffffff at
device 0.0 o
n pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem
0xe0002000-0xe00020ff ir
q 11 at device 10.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:00:e2:8d:6b:51
pci0: <serial bus, FireWire> at device 11.0 (no driver attached)
cbb0: <TI1410 PCI-CardBus Bridge> at device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xe0003000-0xe0003fff irq
 11 at device 15.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
atapci0: <AcerLabs Aladdin UDMA100 controller> port
0x2480-0x248f,0x376,0x170-0x
177,0x3f6,0x1f0-0x1f7 at device 16.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> at device 19.0 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb2: <O2Micro OZ6933 PCI-CardBus Bridge> at device 19.1 on pci0
cardbus2: <CardBus bus> on cbb2
pccard2: <16-bit PCCard bus> on cbb2
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xe0004000-0xe0004fff irq
 11 at device 20.0 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
fdc1: cannot allocate I/O port (6 ports)
unknown: <PNP0501> can't assign resources (port)
unknown: <ALI5123> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0400> can't assign resources (port)
Timecounter "TSC" frequency 1560224664 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.35 initialized.  Default = block all, Logging = enabled
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 28615MB <IC25N030ATCS04-0/CA3OA71A> [58140/16/63] at ata0-master
UDMA33
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2502/1C11> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s2a
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 10
function 0 co
nfig 1 on pccard0
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.16.1)
wi0: Ethernet address: 00:02:2d:6e:72:fc
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
pccard2: <unknown card> (manufacturer=0xffff, product=0x0001) at
function 0
pccard2:    CIS info: O2Micro, SmartCardBus Reader, V1.0




Thanks for all advices!

reagards,

Espen Tagestad



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041130092128.GA79054>