Date: Sun, 15 Mar 2015 10:30:12 -0600 From: Ian Lepore <ian@freebsd.org> To: Russell Haley <russ.haley@gmail.com> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Building Cross Compiler and u-boot Message-ID: <1426437012.67325.7.camel@freebsd.org> In-Reply-To: <CABx9NuQXb_FJMw%2BqwbaGuFX94LkEMRf_9kAuowk6ctYBEDQn=A@mail.gmail.com> References: <CABx9NuQXb_FJMw%2BqwbaGuFX94LkEMRf_9kAuowk6ctYBEDQn=A@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 2015-03-14 at 21:14 -0700, Russell Haley wrote: > Hello I am trying to build the cross compile tools and make u-boot. > > Tim Kientzle spoke about two ways of getting cross compilers for > outside of building FreeBDS: > > 1) make TARGET=arm TARGET_ARCH=armv6 buildenv > > after a successful buildworld > > 2)make xdev XDEV=arm XDEV_ARCH=armv6 > > I have struggled (and failed) to make either work. I checked out Rui > Paulos uboot fork to /usr/uboot. > > > 1)Using buildenv -> The xdev way of building crosstools to build uboot is pretty much dead. Probably the best way forward is to use one of the existing u-boot ports such as sysutils/u-boot-wandboard, copy it and transform it into a port to build the flavor you need. To save the time of building the port cross-compiler from scratch you can do "pkg install arm-none-eabi-gcc". Are you working with the ConnectCore 6? If so, the u-boot ports for wandboard or cubox-hummingboard are probably 99% ready, you may need to tweak the config file patch in the port. -- Ian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1426437012.67325.7.camel>