Date: Thu, 4 Jan 2001 06:53:39 -0500 (EST) From: Evan S <kaworu@sektor7.ath.cx> To: Ty <infidel2112@home.com> Cc: questions@freebsd.org, stable@freebsd.org Subject: Re: sblive installed, but no sound in 4.2 Message-ID: <Pine.GSO.4.10.10101040652040.4026-100000@wintermute.sekt7> In-Reply-To: <3A546233.DB234C09@home.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hey, I think I had the same problem with my SB Live. I run a Dual Celeron. When I would use xmms to play mp3s, nothing would come out of the speakers, even though when I used cat /dev/sndstat it showed a correctly detected and configured SB Live, on irq 18, which used to work fine in Linux. Finally, out of curiosity, I opened up the case and moved my SB Live to PCI slot 2. Then it was on irq 16, and it worked. :-) Maybe this will work for you Evan Sarmiento (kaworu@sektor7.ath.cx) http://sekt7.org/es On Thu, 4 Jan 2001, Ty wrote: > thanks for the reply, I gave that a try but alas no luck. > > I'm now dual booting into mandrake, mandrake has no problem at all > dealing with the sblive, it sounds great weird. > > thanks again! > > > Andreas Ntaflos wrote: > > > > hi > > everything you did seems right, i have an sb live working under fbsd 4.2. > > maybe it helps if you do a MAKEDEV all in /dev after rebuilding the kernel > > (as this should always be done after building a new kernel), before you do > > a MAKEDEV snd0. > > > > that's the only step i could imagine you forgot, as everything else is what > > i did too, and my sound works very well under 4.2 > > > > regards > > Andreas Ntaflos > > > > At 12:06 01.01.2001 -0800, you wrote: > > >Hello, > > > > > >I believe I have my sound blaster live correctly installed under feebsd > > >4.2 yet I can't hear any audio. I do have the mixer settings up. > > >i recompiled the kernel with > > >device pcm > > >(and i have device pci in already) > > > > > >then rebooted and did a > > >cd /dev > > >./MAKDEV snd0 > > > > > >cat /dev/sndstat > > > > > >shows: > > > > > >FreeBSD Audio Driver (newpcm) Dec 31 2000 12:36:40 > > >Installed devices: > > >pcm0: <Creative EMU10K1> at io 0xd000 irq 10 (4p/3r channels duplex) > > > > > >Mixer shows > > > > > >Mixer vol is currently set to 62:62 > > >Mixer pcm is currently set to 100:100 > > >Mixer speaker is currently set to 100:100 > > >Mixer line is currently set to 75:75 > > >Mixer mic is currently set to 80:80 > > >Mixer cd is currently set to 69:69 > > >Mixer rec is currently set to 0:0 > > >Mixer line1 is currently set to 75:75 > > >Mixer phin is currently set to 69:69 > > >Mixer phout is currently set to 97:97 > > >Mixer video is currently set to 100:100bash-2.04# cat /dev/sndstat > > > > > >help, is there something i'm missing here? I've put the volume to 100% on > > >everything including speakers and I don't hear a peep, no matter what type > > >of audio I attempt to play. > > > > > >thank you! > > > > > > > > > > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > > >with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.10.10101040652040.4026-100000>