Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 14 Oct 1995 12:10:10 -0400 (EDT)
From:      Bob Fayne - IDS World Network Tech Support <BOBFE@ids.net>
To:        QUESTIONS@FREEBSD.ORG
Cc:        BOBFE@ids.net
Subject:   Make kernel fails
Message-ID:  <951014121010.3994e@ids.net>

next in thread | raw e-mail | index | archive | help
I can't get a kernel to compile any more for some unknown reason.  I've
followed the instructions on the web page, and even tried using my
old config file to regenerate the exact same kernel I'm using now.

Here's the output I get when I do a make. (config MYKERNEL works fine)

-------------------------------------------------------
paperboy:/usr/src/sys/compile/PAPERBOY> make
cc -c -O -W -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit 
-Wnested-exter
ns  -nostdinc -I. -I../.. -I../../sys -I/usr/include -DPAPERBOY -DI586_CPU
-DMAX
MEM=131072 -DUCONSOLE -DBOUNCE_BUFFERS -DSCSI_DELAY=15 -DCOMPAT_43 -DPROCFS
-DCD
9660 -DMSDOSFS -DNFS -DFFS -DINET -DKERNEL -Di386 -DLOAD_ADDRESS=0xF0100000
-DTI
MEZONE=0 -DDST=0 -DMAXUSERS=50 -UKERNEL ../../i386/i386/genassym.c
In file included from ./machine/signal.h:48,
                 from ../../sys/signal.h:48,
                 from ../../sys/param.h:88,
                 from ../../i386/i386/genassym.c:41:
./machine/trap.h:40: unterminated `#if' conditional
In file included from ../../sys/param.h:91,
                 from ../../i386/i386/genassym.c:41:
./machine/param.h:106: unterminated comment
./machine/param.h:105: unterminated `#if' conditional
In file included from ../../sys/param.h:92,
                 from ../../i386/i386/genassym.c:41:
./machine/limits.h:37: unterminated `#if' conditional
In file included from ./machine/cpu.h:46,
                 from ../../i386/i386/genassym.c:54:
./machine/frame.h:40: unterminated `#if' conditional
In file included from ./machine/cpu.h:47,
                 from ../../i386/i386/genassym.c:54:
./machine/segments.h:1: unterminated comment
In file included from ../../i386/i386/genassym.c:55:
./machine/trap.h:40: unterminated `#if' conditional
In file included from ../../vm/vm_param.h:74,
                 from ../../vm/vm.h:63,
                 from ../../i386/i386/genassym.c:60:
./machine/vmparam.h:118: invalid macro name
./machine/vmparam.h:43: unterminated `#if' conditional
In file included from ../../sys/user.h:40,
                 from ../../i386/i386/genassym.c:61:
./machine/pcb.h:40: unterminated `#if' conditional
*** Error code 1

Stop.

-----------------------------------------

My exact config file follows at the end of this message.  I'm also
having trouble with ipfw, I get this error when I try to do anything
with ipfw...

paperboy:/> ipfw flush
ipfw: setsockopt failed.


Any help would be most appreciated.  

Bob Fayne
bobfe@ids.net

-----------------------------------------

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
#	GENERIC,v 1.45.2.3 1995/06/05 21:50:41 jkh Exp
#

machine		"i386"
#cpu		"I386_CPU"
#cpu		"I486_CPU"
cpu		"I586_CPU"
ident		PAPERBOY	
maxusers	50

#options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3
options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
options		UCONSOLE		#Allow users to grab the console
options		"MAXMEM=131072"		#Allow max memory

config		kernel	root on wd0 

controller	isa0
controller	pci0
device		de0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1
tape		ft0	at fdc0 drive 2

controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

controller	ncr0
controller	ahc0

controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
controller	ahc1	at isa? bio irq ? vector ahcintr
controller	ahb0	at isa? bio irq ? vector ahbintr
controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
#controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
#controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr

controller	scbus0

device		sd0

device		st0

device		cd0	#Only need one of these, the code dynamically grows

device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
#device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr

controller	matcd0	at isa? port ? bio

device		scd0	at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
#options		"PCVT_FREEBSD=210"	# pcvt running on FreeBSD 2.1
#options		XSERVER			# include code for XFree86

device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr
device		lpt1	at isa? port? tty
device		lpt2	at isa? port? tty

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
pseudo-device	sl	1
# ijppp uses tun instead of ppp device
#pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?951014121010.3994e>