Date: Thu, 8 Apr 2004 11:42:05 -0400 From: "Jeff Racine" <jracine@maxwell.syr.edu> To: <freebsd-gnome@freebsd.org> Subject: Evolution 1.4 problems under gnome2.6... undefined symbol "e_book_get_config_database" Message-ID: <32A8B2CB12BFC84D8D11D872C787AA9A015E9AB6@EXCHANGE.forest.maxwell.syr.edu>
next in thread | raw e-mail | index | archive | help
Hi. I am experiencing this problem on three different systems after = upgrading to gnome2.6 (the one listed below, amd64, and my home i386 = machine). When I run evolution I get the following. Any/all suggesting gratefully = appreciated. Thanks ever so much for your time and efforts. (evolution:45957): GLib-GObject-WARNING **: g_object_set_valist: = construct property "type" for object `ESplash' can't be set after = construction /libexec/ld-elf.so.1: = /usr/X11R6/lib/evolution/1.4/components/libevolution-addressbook.so: = Undefined symbol "e_book_get_config_database" jracine#=20 -- uname -a FreeBSD jracine-laptop.maxwell.syr.edu 5.2-CURRENT FreeBSD 5.2-CURRENT = #1: Thu Apr 1 12:56:07 EST 2004 = root@jracine-laptop.maxwell.syr.edu:/usr/obj/usr/src/sys/INSPIRON i386 -- dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #1: Thu Apr 1 12:56:07 EST 2004 root@jracine-laptop.maxwell.syr.edu:/usr/obj/usr/src/sys/INSPIRON Preloaded elf kernel "/boot/kernel/kernel" at 0xc081b000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc081b1cc. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1300MHz (1298.90-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x695 Stepping =3D 5 = Features=3D0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMO= V,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> real memory =3D 402317312 (383 MB) avail memory =3D 383950848 (366 MB) Pentium Pro MTRR support enabled cpu0 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00fc590 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 29 INTA is routed to irq 11 pcib0: slot 29 INTB is routed to irq 11 pcib0: slot 29 INTC is routed to irq 11 pcib0: slot 29 INTD is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at = device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f = irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f = irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev = 1.10/3.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f = irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered umass0: NEC NEC USB UF000x, rev 1.10/1.50, addr 2 pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 0 INTA is routed to irq 11 pcib2: slot 3 INTA is routed to irq 11 bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem = 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, = 1000baseTX-FDX, auto bge0: Ethernet address: 00:0b:db:a1:c7:a3 bge0: [GIANT-LOCKED] cbb0: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: slot 1 INTA is routed to irq 11 cbb1: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: slot 1 INTA is routed to irq 11 pci2: <network> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port = 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device = 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem = 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on = pci0 pcm0: [GIANT-LOCKED] pcm0: <SigmaTel STAC9750/51 AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 Timecounter "TSC" frequency 1298901795 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cpu0: Performance states changed pccard1: <unknown card> (manufacturer=3D0xffff, product=3D0x0001) at = function 0 pccard1: CIS info: O2Micro, SmartCardBus Reader, V1.0 ad0: 28615MB <HITACHI_DK23EA-30> [58140/16/63] at ata0-master UDMA100 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0=20 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0 (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) da0 at umass-sim0 bus 0 target 0 lun 0 da0: <NEC USB UF000x 1.50> Removable Direct Access SCSI-0 device=20 da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?32A8B2CB12BFC84D8D11D872C787AA9A015E9AB6>