Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 05 Jun 2012 22:16:49 +0200
From:      Miroslav Lachman <000.fbsd@quip.cz>
To:        Sebastian Stach <sebsta@t-online.de>
Cc:        freebsd-stable <freebsd-stable@freebsd.org>
Subject:   Re: em interfaces supermicro X9SCM-F board
Message-ID:  <4FCE6931.6010901@quip.cz>
In-Reply-To: <878874BA-2F5C-4A7E-8690-2A8A96536AE0@t-online.de>
References:  <4FCE37FC.1090405@gmail.com> <878874BA-2F5C-4A7E-8690-2A8A96536AE0@t-online.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Sebastian Stach wrote:
> I have an X9SCA-F board and recently updated the BIOS to version 2.0 (the .508 BIOS file).
> Its not the same board as yours but maybe the you have the same problem. When i downloaded
> the BIOS from the Supermicro website on May 23 the included AMI.BAT only updated the BIOS
> and not the Intel ME BIOS extension.

[...]

There is a differenc between X9SCM-F and X9SCA-F. The SCM version has 
82579V and 82574L NIC, but X9SCA-F has both NICs 82574L.
And as I read about some problems with 82579V on the net, I bought 
X9SCA-F few weeks ago.
I didn't notice any problem.

Can you describe the conditions when you have some network problems so I 
can do some tests?

I am running FreeBSD 8.3-RELEASE for testing, not heavily loaded.

Miroslav Lachman


> Am 05.06.2012 um 18:46 schrieb Johan Hendriks:
>
>> hello all.
>>
>> i have a new board the supermicro X9SCM-F with the latest firmware 508.
>> I am having some trouble with the onboard intel nics.
>> It only activate one nic.
>>  From dmesg
>>
>> em0:<Intel(R) PRO/1000 Network Connection 7.2.3>  port 0xf020-0xf03f mem 0xf7800000-0xf781ffff,0xf7825000-0xf7825fff irq 20 at device 25.0 on pci0
>> em0: Using an MSI interrupt
>> em0: Setup of Shared code failed
>> device_attach: em0 attach returned 6
>> ehci0:<EHCI (generic) USB 2.0 controller>  mem 0xf7824000-0xf78243ff irq 16 at device 26.0 on pci0
>> usbus0: EHCI version 1.0
>> usbus0:<EHCI (generic) USB 2.0 controller>  on ehci0
>> pcib2:<ACPI PCI-PCI bridge>  irq 16 at device 28.0 on pci0
>> pci2:<ACPI PCI bus>  on pcib2
>> pcib3:<ACPI PCI-PCI bridge>  irq 16 at device 28.4 on pci0
>> pci3:<ACPI PCI bus>  on pcib3
>> em1:<Intel(R) PRO/1000 Network Connection 7.2.3>  port 0xd000-0xd01f mem 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3
>> em1: Using MSIX interrupts with 3 vectors
>> em1: Ethernet address: 00:25:90:75:c8:08
>>
>> pciconf -vl
>>
>> em0@pci0:0:25:0:        class=0x020000 card=0x00008086 chip=0x15038086 rev=0x05 hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82579V Gigabit Network Connection'
>>     class      = network
>>     subclass   = ethernet
>>
>>
>> em1@pci0:3:0:0: class=0x020000 card=0x000015d9 chip=0x10d38086 rev=0x00 hdr=0x00
>>     vendor     = 'Intel Corporation'
>>     device     = '82574L Gigabit Network Connection'
>>     class      = network
>>     subclass   = ethernet
>>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FCE6931.6010901>