Date: Thu, 23 Dec 2004 18:07:12 GMT From: Peter Trifonov <petert@dcn.infos.ru> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/75441: fxp device timeout Message-ID: <200412231807.iBNI7CJp060856@www.freebsd.org> Resent-Message-ID: <200412231810.iBNIAVkN029123@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 75441
>Category: i386
>Synopsis: fxp device timeout
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Dec 23 18:10:31 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Peter Trifonov
>Release: 5.3
>Organization:
St.Petersburg State Polytechnic University
>Environment:
FreeBSD firewall.xj.dcn 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Sat Dec 18 11:45:40 MSK 2004 bugman@firewall.xj.dcn:/usr/src/sys/i386/compile/FIREWALL i386
>Description:
The system is dual processor PentiumPro with both IDE& SCSI hard drives and 3 NICs xl0,fxp0,fxp1
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=9<RXCSUM,VLAN_MTU>
inet 10.0.103.3 netmask 0xffffff00 broadcast 10.0.103.255
inet xxxxxxxxxx netmask 0xfffffff0 broadcast xxxxxxxxxxx
ether 00:50:da:39:91:99
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet xxxxxxxxx netmask 0xffffffc0 broadcast xxxxxxxxxxxxxx
ether 00:60:b0:67:21:6f
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet xxxxxxxxxxxxxxxx netmask 0xfffffffc broadcast xxxxxxxxxxxxxxx
ether 00:60:b0:67:31:ec
media: Ethernet autoselect (10baseT/UTP)
status: active
From time to time both fxp's SIMULTANEOUSLY stop working and produce messages fxp*: device timeout.
After doing ifconfig fxp* down& up the system said
fxp1: SCB timeout: 0x70 0x0 0x50 0x0
fxp1: SCB timeout: 0x20 0x0 0x50 0x0
fxp0: SCB timeout: 0x70 0x0 0x50 0x0
fxp1: SCB timeout: 0x20 0x0 0x50 0x0
The system resumes normal operation only after reboot.
xl0 does not experience any problems.
>How-To-Repeat:
The problem occurs sporadically approximately two times per day.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200412231807.iBNI7CJp060856>