From owner-freebsd-stable Wed Oct 4 11: 0:44 2000 Delivered-To: freebsd-stable@freebsd.org Received: from eris.intertech-canada.com (eris.intertech-canada.com [216.191.183.253]) by hub.freebsd.org (Postfix) with SMTP id 805D837B502 for ; Wed, 4 Oct 2000 11:00:35 -0700 (PDT) Received: (qmail 401 invoked by uid 98); 4 Oct 2000 17:55:58 -0000 Message-ID: <20001004175558.400.qmail@eris.intertech-canada.com> From: "Flattie McGee" To: stable@freebsd.org Subject: Kernel Compile error on 4.1.1 (with info) Date: Wed, 04 Oct 2000 17:55:58 GMT Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Its me again ;) So I managed to make it through the ordeal of the make world processes (I forgot to set the BIOS time/date, thanks to the people who helped me, you know who you are). Now I'm faced with another problem. Odly enough, I've commented out the USB support lines in the kernel, and removed the #'s to uncomment them. I've tried removing the ata drivers..too. I've provided my Kernel config info, dmesg info as well as the error msg. --- machine i386 cpu I686_CPU ident GENERIC maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives #options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device ppi # Parallel port interface device # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # USB support device uhci # UHCI PCI->USB interface device usb # USB Bus (required) # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device pty 16 # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf 5 # Berkeley packet filter pseudo-device snp 5 # Snoop --- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1.1-RELEASE #0: Tue Sep 26 00:46:59 GMT 2000 jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff real memory = 100597760 (98240K bytes) avail memory = 93712384 (91516K bytes) Preloaded elf kernel "kernel" at 0xc0416000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 isab0: at device 4.0 on pci0 isa0: on isab0 atapci0: port 0xf000-0xf00f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xe000-0xe01f irq 11 at device 4.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: port 0x5000-0x500f at device 4.3 on pci0 pci0: at 9.0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe800-0xe87f mem 0xd5810000-0xd581007f irq 10 at device 11.0 on pci0 xl0: Ethernet address: 00:50:da:84:83:88 miibus0: on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: port 0xec00-0xecff mem 0xd5811000-0xd5811fff irq 5 at device 13.0 on pci0 aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 acd0: CDROM at ata0-slave using PIO4 Mounting root from ufs:/dev/da0s1a da0 at ahc0 bus 0 target 1 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) da0: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) da1 at ahc0 bus 0 target 4 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) da1: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C) xl0: transmission error: 90 xl0: tx underrun, increasing tx start threshold to 120 bytes xl0: transmission error: 90 xl0: tx underrun, increasing tx start threshold to 180 bytes xl0: transmission error: 90 xl0: tx underrun, increasing tx start threshold to 240 bytes --- ===> aue cc -O -pipe -D_KERNEL -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -DKLD_MODULE -nostdinc -I- -I. -I@ -I@/../include -mpreferred-stack-boundary=2 -c /usr/src/sys/modules/aue/../../dev/usb/if_aue.c /usr/src/sys/modules/aue/../../dev/usb/if_aue.c:110: `USB_PRODUCT_DLINK_DSB650' undeclared here (not in a function) /usr/src/sys/modules/aue/../../dev/usb/if_aue.c:110: initializer element is not constant /usr/src/sys/modules/aue/../../dev/usb/if_aue.c:110: (near initialization for `aue_devs[3].aue_did') /usr/src/sys/modules/aue/../../dev/usb/if_aue.c: In function `aue_miibus_statchg': /usr/src/sys/modules/aue/../../dev/usb/if_aue.c:494: `USB_PRODUCT_DLINK_DSB650' undeclared (first use in this function) /usr/src/sys/modules/aue/../../dev/usb/if_aue.c:494: (Each undeclared identifier is reported only once /usr/src/sys/modules/aue/../../dev/usb/if_aue.c:494: for each function it appears in.) /usr/src/sys/modules/aue/../../dev/usb/if_aue.c: In function `aue_reset': /usr/src/sys/modules/aue/../../dev/usb/if_aue.c:589: `USB_PRODUCT_DLINK_DSB650' undeclared (first use in this function) *** Error code 1 Stop in /usr/src/sys/modules/aue. *** Error code 1 Stop in /usr/src/sys/modules. *** Error code 1 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message