Date: Sat, 4 Dec 2004 10:41:22 +0100 (MET) From: "freebsd_daemon" <free.bsd@gmx.net> To: freebsd-hackers@freebsd.org, freebsd-questions@freebsd.org Subject: Acer TM 603TER freezes on 5.x Message-ID: <17272.1102153282@www50.gmx.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Dear list, Installing FreeBSD 5.x (5.0, 5.1, 5.2, 5.2.1, and 5.3) on my Acer Travelmate 603TER the machine freezes after being up for a few seconds (just enough time to mount my USB stick and save a dmesg). On 5.3R I get an "ata1-slave: FAILURE - ATAPI_IDENTIFY timed out" error message (I am not sure if the freeze is related to this), otherwise the install works okay (no freeze); did not used to be so on the other 5.x-Releases (froze during install). It does not matter if I boot with ACPI enabled or disabled; it always freezes. I do not experience that problem with 4.x (since 4.6R) and not with OpenBSD 3.5 and 3.6. I would really apreciate some advice and help. The dmesg from the last try (5.3R) is attached. TIA zheyu -- GMX ProMail mit bestem Virenschutz http://www.gmx.net/de/go/mail +++ Empfehlung der Redaktion +++ Internet Professionell 10/04 +++ [-- Attachment #2 --] Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004 root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (698.56-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268304384 (255 MB) avail memory = 252895232 (241 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <Acer BNOTE> on motherboard acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x9> port 0x66,0x62 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.PAGP - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x9040-0x904f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x9000-0x901f irq 11 at device 2.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 2.3 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0x7480-0x74bf mem 0x80200000-0x802fffff,0x80100000-0x80100fff irq 5 at device 6.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:d0:59:3e:01:55 pci0: <simple comms, UART> at device 6.1 (no driver attached) pci0: <multimedia, audio> at device 8.0 (no driver attached) cbb0: <O2Micro OZ6812/6872 PCI-CardBus Bridge> irq 11 at device 9.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37b irq 7 drq 1 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 drq 3 on acpi0 sio1: type 16550A psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 698557998 Hz quality 800 Timecounters tick every 10.000 msec cardbus0: <network, ethernet> at device 0.0 (no driver attached) cbb0: CardBus card activation failed ad0: 11513MB <IBM-DARA-212000/AR4OA51A> [23392/16/63] at ata0-master UDMA33 ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1-slave: FAILURE - ATAPI_IDENTIFY timed out acd0: CDRW <UJDA320/1.30> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a umass0: ASUS Ai-Flash, rev 1.10/1.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <ASUS Ai-Flash 4.0A> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 62MB (126976 512 byte sectors: 64H 32S/T 62C)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?17272.1102153282>