Date: Sat, 20 Aug 2005 19:42:08 +0200 From: Dylan Wylie <d.wylie@wylie.nl> To: Kirill Ponomarew <krion@voodoo.oberon.net>, freebsd-mobile@freebsd.org Subject: Re: HP nx9005 and Netgear WG511T Message-ID: <43076B70.10800@wylie.nl> In-Reply-To: <20050820162324.GF34551@voodoo.oberon.net> References: <20050820074445.GB34551@voodoo.oberon.net> <20050820074738.GC34551@voodoo.oberon.net> <43074197.5000503@wylie.nl> <20050820151827.GE34551@voodoo.oberon.net> <20050820181031.5gg7nbr9y1c804s8@webmail.wylie.nl> <20050820162324.GF34551@voodoo.oberon.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Kirill Ponomarew wrote: >On Sat, Aug 20, 2005 at 06:10:31PM +0200, Dylan Wylie wrote: > > >>>You're able to run it on HP Compaq nx9005 ? >>> >>> >>Older compaq's; one pressario1600 and a E500 >> >> >>>I'm afraid there is something more broken than ath driver. After >>>unplugging the card, I'm also getting on console: >>> >>>ath0: ath_reset: unable to reset hardware; hal status 3229953940 >>>ath0: hardware error; resetting >>>ath0: ath_chan_set: unable to reset channel 6 (2437 Mhz) >>>ath0: ath_reset: unable to reset hardware; hal status 3229953940 >>>ath0: detached >>> >>>-Kirill >>> >>> >>> >>So,what cardbus hardware for an nx9005? >>for presario 1600 it's: >>cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0 >>cardbus0: <CardBus bus> on cbb0 >>pccard0: <16-bit PCCard bus> on cbb0 >> >> > >cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 11 at device 10.0 on pci0 >cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000 >cardbus0: <CardBus bus> on cbb0 >pccard0: <16-bit PCCard bus> on cbb0 > >cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> at device 10.1 on pci0 >cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 >cardbus1: <CardBus bus> on cbb1 >pccard1: <16-bit PCCard bus> on cbb1 >pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKF:0) >pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKF >cbb1: [MPSAFE] > > > >>I am still curious if you can get the card to work on _any_ other machine? >> >> > >Yes, the card works perfect on all another machines. > > > >>The messages on uplugging would't realy worry me actually; it does >>detach eventualy. Could be wrong though. Perhaps some-one else >>can enlighten us on the ghz stuff: does it have any 'real' value, >>or is it just some hardware string? >> >> > >-Kirill > > Hmm. Probably best to sum things up, including all the dmesg outputs and take it over to -current. And perhaps including any info on other cards in these cbb's (do other cards work? same result for either cbb?) That is; unless any-one else has any sugestions. Perhaps some-one can provide some feedback on this combo (OZ6933+ath). DW
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43076B70.10800>