Date: Sat, 2 Nov 1996 19:22:06 +0200 (EET) From: Andrew Stesin <stesin@gu.net> To: hackers@freebsd.org, isp@freebsd.org Cc: gated@gated.merit.edu Subject: Gated (both 3.5b3 and 3.6a2) on FreeBSD woes: no OSPF Hello startup :( Message-ID: <Pine.BSI.3.95.961102190041.1642A-100000@creator.gu.kiev.ua>
next in thread | raw e-mail | index | archive | help
Hello dear Gated and FreeBSD hackers, wouldn't you mind looking into this strange problem, please? The simplified setup is: an ethernet segment which I want to become an OSPF area; and several boxes -- Linux, BSDI, and one FreeBSD 2.2-960612-SNAP machine (a very stable SNAP, never seen any problem with it before), all are to become interarea routers later. Now I just wish to setup internal interaction between all the routers on the ether, inside a single area. While Linux and BSDI with Gated 3.6a2 are interacting Ok one with another, FreeBSD box with 3.5b3 didn't want to take part in OSPF Hello negotiation -- the ether was full of "Hello timer mismatch" messages. Ok, I thought; I'd take 3.6a2 to FreeBSD, too. It was easy, thanks A LOT for this work to John Capo who did the port of a new Gated already: > I'm running 3.6a2 on one -current system and two -stable systems. > A port is at ftp://ftp.irbs.com/FreeBSD/ports/gated-3.6a2.tgz. > John Capo jc@irbs.com > IRBS Engineering FreeBSD Servers and Workstations > (954) 792-9551 Unix/Internet Consulting - ISP Solutions But new Gated (which is really superior to the older ones due to many reasons) didn't cure the problem :( BSDI and Linux are still seeing one another nicely, but they can't see FreeBSD; and FreeBSD sees only messages like this (here is the trace snippet from FreeBSD), so the three boxes aren't able to start cooperative interaction. Nov 2 19:16:54 Nov 2 19:16:54 OSPF RECV Area 194.93.190 194.93.190.2 -> 224.0.0.5: HELLO: hello timer mismatch Nov 2 19:16:57 OSPF RECV 194.93.190.5(ed0) -> 224.0.0.5 Hello Vers: 2 Len: 48 Nov 2 19:16:57 OSPF RECV RouterID: 194.93.190.5 Area: 194.93.190 Checksum: 0x7a2b Nov 2 19:16:57 OSPF RECV Auth: Type: 0 Key: 00000000.00000000 Nov 2 19:16:57 OSPF RECV Netmask: 255.255.255.128 Hello Int: 10 Options: <Externals> Nov 2 19:16:57 OSPF RECV Pri: 10 DeadInt: 40 DR: 194.93.190.5 BDR: 194.93.190.2 Nov 2 19:16:57 OSPF RECV Attached routers: 194.93.190.2 Nov 2 19:16:57 Nov 2 19:16:57 OSPF RECV Area 194.93.190 194.93.190.5 -> 224.0.0.5: HELLO: hello timer mismatch Nov 2 19:17:04 OSPF RECV 194.93.190.2(ed0) -> 224.0.0.5 Hello Vers: 2 Len: 48 Nov 2 19:17:04 OSPF RECV RouterID: 194.93.190.2 Area: 194.93.190 Checksum: 0x7a2b Nov 2 19:17:04 OSPF RECV Auth: Type: 0 Key: 00000000.00000000 Nov 2 19:17:04 OSPF RECV Netmask: 255.255.255.128 Hello Int: 10 Options: <Externals> Nov 2 19:17:04 OSPF RECV Pri: 10 DeadInt: 40 DR: 194.93.190.5 BDR: 194.93.190.2 Nov 2 19:17:04 OSPF RECV Attached routers: 194.93.190.5 Nov 2 19:17:04 194.93.190.5 is Linux, 194.93.190.2 is BSDI. Can anyone help me? Seems that something is wrong with FreeBSD here -- or with it's admin (me :) Any hints suggestions and comments are appreciated! Thanks! -- Best, Andrew Stesin nic-hdl: ST73-RIPE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.95.961102190041.1642A-100000>