Date: Fri, 9 Feb 2007 10:23:03 +0100 From: Gilles Celli <gilles.celli@ecgs.lu> To: David Barbero <sico@loquefaltaba.com> Cc: freebsd-sparc64@freebsd.org Subject: Re: FreeBSD 6.2 hangs on Sun Ultra 80 Message-ID: <AA86B8B4-C8D7-41A8-AF73-7E8A6B07341C@ecgs.lu> In-Reply-To: <20070208105431.kovv39blwk8oco4g@correo.loquefaltaba.com> References: <D1125803-BD07-4331-B9C1-A64177EA3AC2@ecgs.lu> <20070208105431.kovv39blwk8oco4g@correo.loquefaltaba.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok thanks, I am a little late for the reply, but I will try that ASAP :-) cheers, gilles On Feb 8, 2007, at 10:54 AM, David Barbero wrote: > Gilles Celli <gilles.celli@ecgs.lu> ha escrito: > >> Hi, >> >> I tried to install FreeBSD 6.2 via CD-ROM on a SUN Ultra 80 (2x >> Ultrasparc-II@450MHz / OpenBoot 3.23 / 1.2GB RAM) with Raptor GFX >> graphics-card, >> monitor and keyboard. >> >> After booting from the CD, it hangs with the following message: >> * Nothing to autoload yet >> * Jumping to kernel entry at 0xc0060000 >> >> and then hangs :-( > > This errors are caused with a not supported graphics card, i have > the same problem with a enterprise 450. > >> Could it be due to the graphics-card ? Any work-around? >> >> I've also read that you can boot in serial console mode... >> But how do I do that ? >> >> Any suggestions greatly appreciated, > > Yes, you can boot whit serial console, it's simple, disconect your > keyboard and monitor on your SUN, and connect a serial cable to > other machine, the Sun hardware when not detecting keyboard or > video, it uses by defect the serial port to have control on the > machine, in the other machine you need run a minicom or if you use > Windos, hyperterminal. > > More info in: > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/term.html > > Regards. > > -- > "Linux is for people who hate Windows, BSD is for people who love > UNIX" > "Social Engineer -> Because there is no patch for human stupidity" > > _______________________________________________ > freebsd-sparc64@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64 > To unsubscribe, send any mail to "freebsd-sparc64- > unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AA86B8B4-C8D7-41A8-AF73-7E8A6B07341C>