Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 09 Dec 2014 06:34:09 +0000
From:      bugzilla-noreply@freebsd.org
To:        freebsd-bugs@FreeBSD.org
Subject:   [Bug 195818] New: [mps] LSI SAS 9211-4i (IT-mode) iuCRC error detected
Message-ID:  <bug-195818-8@https.bugs.freebsd.org/bugzilla/>

next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=195818

            Bug ID: 195818
           Summary: [mps] LSI SAS 9211-4i (IT-mode) iuCRC error detected
           Product: Base System
           Version: 10.1-RELEASE
          Hardware: Any
                OS: Any
            Status: New
          Severity: Affects Some People
          Priority: ---
         Component: kern
          Assignee: freebsd-bugs@FreeBSD.org
          Reporter: pakhom706@gmail.com

I have problem with LSI SAS 9211-4i in IT-mode and SSD KINGSTON SV300S3.
To LSI HBA connected two devices: SSD KINGSTON SV300S3 and WD20EARX-00P, WD
works fine but KINGSTON have more errors:

Dec  8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): READ(10). CDB: 28 00 09 30 5e
71 00 00 07 00 length 3584 SMID 753 terminated ioc 804b scsi 0 state 0 xfer 0
Dec  8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): READ(10). CDB: 28 00 09 30 5e
e1 00 00 07 00 length 3584 SMID 757 terminated ioc 804b scsi 0 state 0 xfer 0
Dec  8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): READ(10). CDB: 28 00 09 50 61
0e 00 00 05 00 length 2560 SMID 759 terminated ioc 804b scsi 0 state 0 xfer 0
Dec  8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): READ(10). CDB: 28 00 09 30 5f
0b 00 00 07 00 
Dec  8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): CAM status: SCSI Status Error
Dec  8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): SCSI status: Check Condition
Dec  8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): SCSI sense: ABORTED COMMAND
asc:47,3 (Information unit iuCRC error detected)
Dec  8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): Retrying command (per sense
data)

I try to connect KINGSTON SSD to another cable, instead WD but problem still
the same. If I connect KINGSTON SSD to onboard sata-2 controller the device
work without errors.

mps0: <LSI SAS2004> port 0xc000-0xc0ff mem
0xfab3c000-0xfab3ffff,0xfab40000-0xfab7ffff irq 16 at device 0.0 on pci1
mps0: Firmware: 20.00.00.00, Driver: 19.00.00.00-fbsd

da0: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device 
da0: Serial Number      WD-WMAZA7558670
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da0: quirks=0x8<4K>
da1 at mps0 bus 0 scbus0 target 2 lun 0
da1: <ATA KINGSTON SV300S3 BBF0> Fixed Direct Access SCSI-6 device 
da1: Serial Number 50026B7745052C5D    
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)

mps0@pci0:1:0:0:        class=0x010700 card=0x30101000 chip=0x00701000 rev=0x02
hdr=0x00
    vendor     = 'LSI Logic / Symbios Logic'
    device     = 'SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire]'
    class      = mass storage
    subclass   = SAS


$ uname -r
10.1-RELEASE

-- 
You are receiving this mail because:
You are the assignee for the bug.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-195818-8>