Date: Fri, 29 Apr 2011 11:19:20 -0400 From: Michael Powell <nightrecon@hotmail.com> To: freebsd-questions@freebsd.org Subject: Re: Drive selection for gmirror Message-ID: <ipeko8$prq$1@dough.gmane.org> References: <4DB9E68B.2000908@wp.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
Ireneusz Pluta wrote: > Hello, > > when selecting SATA drives for gmirror, boot device, connected to an > on-board controller, should I look for so-called "enterprise grade", or > "raid edition" drives (like for instance > http://www.wdc.com/en/products/products.aspx?id=40), or I should rather > focus on models closer to "consumer grade"? Will gmirror configuration > significantly benefit from things like TLER, or it would rather be > harmful, like when using these disks as single ones in desktop > applications? > This is an overly broad generalization, but I would tend to match RE drives with expensive hardware-only RAID controllers. They are touchy and really designed with TLER in mind. On the other end of the spectrum is a pure software RAID such as gmirror. I don't know all that much about the innards but I believe a pure software RAID run on JBOD will work with consumer grade drives just fine most of the time. The in-between caveat is the so-called 'fakeraid' sets of controllers. These are what you're most likely to find as a cheap 'feature-add' on a consumer desktop motherboard. Things like Intel RAID Matrix and such are known not to work well with non-Windows environments. However, much of the time these will still work fine if RAID functionality is turned off in BIOS and the connected drives are JBOD, with a pure software RAID applied instead of trying to utilize the motherboard BIOS RAID. My web development server at home has a pair of Raptors on an ICH5 controller with gmirror and has been completely trouble free for about a year now. I'd stay away from the "Green" drives that spin down all the time. Even a pure software RAID solution is likely not going to be happy with them. -Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ipeko8$prq$1>