From owner-cvs-sys  Sat Nov 30 14:07:55 1996
Return-Path: owner-cvs-sys
Received: (from root@localhost)
          by freefall.freebsd.org (8.7.5/8.7.3) id OAA09208
          for cvs-sys-outgoing; Sat, 30 Nov 1996 14:07:55 -0800 (PST)
Received: from precipice.shockwave.com (ppp-206-170-5-11.rdcy01.pacbell.net [206.170.5.11])
          by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id OAA09196;
          Sat, 30 Nov 1996 14:07:52 -0800 (PST)
Received: from shockwave.com (localhost.shockwave.com [127.0.0.1]) by precipice.shockwave.com (8.8.3/8.7.3) with ESMTP id OAA00398; Sat, 30 Nov 1996 14:07:49 -0800 (PST)
Message-Id: <199611302207.OAA00398@precipice.shockwave.com>
To: Bruce Evans <bde@freefall.freebsd.org>
cc: CVS-committers@freefall.freebsd.org, cvs-all@freefall.freebsd.org,
        cvs-sys@freefall.freebsd.org
Subject: Re: cvs commit: src/sys/i386/isa sio.c 
In-reply-to: Your message of "Sat, 30 Nov 1996 06:51:06 PST."
             <199611301451.GAA19102@freefall.freebsd.org> 
Date: Sat, 30 Nov 1996 14:07:49 -0800
From: Paul Traina <pst@shockwave.com>
Sender: owner-cvs-sys@FreeBSD.ORG
X-Loop: FreeBSD.org
Precedence: bulk

Excuse me, but in the SIO code, "comdefaultrate" certainly did give
the default for ALL serial ports on system boot.  That was a major
crock, because if you never set the baud rate on tty structure for
the serial port that was acting as the console, you'd reprogram the
SIO on every output to the serial port if you ran the serial console
at anything other than TTYSPEED_DEFRATE or whatever the 9600bps define
was.

Paul

  From: Bruce Evans <bde@freefall.freebsd.org>
  Subject: cvs commit:  src/sys/i386/isa sio.c
  bde         96/11/30 06:51:05
  
    Modified:    sys/i386/isa  sio.c
    Log:
    Cleaned up CONSPEED changes.  `comdefaultrate' gives the default
    speed for the "com" console, not for general purpose "com" ports,
    so there was no need to split it into comdefaultrate and condefaultrate.
    
    Revision  Changes    Path
    1.150     +6 -8      src/sys/i386/isa/sio.c