Date: Tue, 17 Mar 2009 11:50:50 +0100 (CET) From: Wojciech Puchar <wojtek@wojtek.tensor.gdynia.pl> To: Andrea Venturoli <ml@netfence.it> Cc: freebsd-questions@freebsd.org Subject: Re: umass performance Message-ID: <alpine.BSF.2.00.0903171150440.57619@wojtek.tensor.gdynia.pl> In-Reply-To: <49BF7F56.4080107@netfence.it> References: <49BF7F56.4080107@netfence.it>
next in thread | previous in thread | raw e-mail | index | archive | help
bs=64k (or more) On Tue, 17 Mar 2009, Andrea Venturoli wrote: > Hello. > > I'm using dd to clone an 8GB USB memory into an identical one. > > > > # dd if=/dev/da2 of=/dev/da1 > load: 0.01 cmd: dd 12026 [physwr] 0.00u 0.01s 0% 904k > 396+0 records in > 395+0 records out > 202240 bytes transferred in 1.453741 secs (139117 bytes/sec) > 15925248+0 records in > 15925248+0 records out > 8153726976 bytes transferred in 31722.194052 secs (257035 bytes/sec) > > > As you can see the process is VERY slow, taking nearly 9 hours. > Anything to try? > > > Some info: > > # uname -a > FreeBSD xxx.xxx.xx 7.1-RELEASE-p2 FreeBSD 7.1-RELEASE-p2 #0: Fri Jan 23 > 13:02:07 CET 2009 root@xxxx.xxx.xx:/usr/obj/usr/src/sys/XXXXXXXX amd64 > h24# > > > # usbdevs -v > Controller /dev/usb0: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 addr 2: full speed, power 90 mA, config 1, USB <-> Serial(0x6001), > FTDI(0x0403), rev 4.00 > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > port 7 addr 2: high speed, power 100 mA, config 1, DISK 2.0(0x1000), > USB(0x090c), rev 4.03 > port 8 addr 3: high speed, power 100 mA, config 1, DISK 2.0(0x1000), > USB(0x090c), rev 4.03 > Controller /dev/usb5: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > (0x103c)(0x0000), rev 1.00 > port 1 addr 2: full speed, self powered, config 1, Virtual Keyboard(0x1027), > HP(0x03f0), rev 0.02 > port 2 addr 3: full speed, self powered, config 1, Virtual Hub(0x1327), > HP(0x03f0), rev 0.01 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > port 7 powered > > > Any hint appreciated. > > bye & Thanks > av. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.0903171150440.57619>