Date: Tue, 10 Dec 2002 08:44:32 +0100 (CET) From: Gerrit Kuehn <gerrit@pmp.uni-hannover.de> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/46157: dnetc crashes DP2-SMP system Message-ID: <200212100744.gBA7iWKY046993@theq.pmp.uni-hannover.de>
next in thread | raw e-mail | index | archive | help
>Number: 46157
>Category: kern
>Synopsis: dnetc crashes DP2-SMP system
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Dec 09 23:50:01 PST 2002
>Closed-Date:
>Last-Modified:
>Originator: Gerrit Kuehn
>Release: FreeBSD 5.0-DP2 i386
>Organization:
none
>Environment:
DP2 on a MSI 694D-Pro AIR mainboard with 2xP3
System: FreeBSD 5.0-DP2 #1: Mon Nov 25 22:41:52 CET 2002
root@stardust.terra.ger:/usr/obj/usr/src/sys/GENERIC2
>Description:
The distributed-net client (see www.distributed.net or /usr/ports/misc/dnetc) can be installed and configured. But on startup, it only works as long as doing benchmarking (with one process). When it trys to start the two crunch-processes, the machine freezes completely (without any error message).
>How-To-Repeat:
Start dnetc on a DP2/SMP machine. Maybe the specific mainboard mentioned above is needed to reproduce this.
>Fix:
unknown
--- dmesg.txt begins here ---
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-DP2 #1: Mon Nov 25 22:41:52 CET 2002
root@stardust.terra.ger:/usr/obj/usr/src/sys/GENERIC2
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0692000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06920a8.
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (935.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1610547200 (1535 MB)
avail memory = 1559879680 (1487 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
Using $PIR table, 9 entries at 0xc00fdc40
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xa000-0xa00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> at device 7.5 (no driver attached)
atapci1: <Promise ATA100 controller> port 0xc800-0xc83f,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807 mem 0xdb000000-0xdb01ffff irq 10 at device 12.0 on pci0
ata2: at 0xb800 on atapci1
ata3: at 0xc000 on atapci1
pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xcc00-0xccff mem 0xdb025000-0xdb0250ff irq 5 at device 14.0 on pci0
vr0: Ethernet address: 00:50:ba:21:d7:c7
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <simple comms> at device 15.0 (no driver attached)
adv0: <AdvanSys ASC3030/50 SCSI controller> port 0xe800-0xe8ff mem 0xdb026000-0xdb0260ff irq 10 at device 16.0 on pci0
adv0: Warning EEPROM Checksum mismatch. Using default device parameters
adv0: AdvanSys SCSI Host Adapter, SCSI ID 7, queue depth 16
sym0: <875> port 0xec00-0xecff mem 0xdb028000-0xdb028fff,0xdb027000-0xdb0270ff irq 11 at device 18.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 42934MB <WDC WD450AA-00BAA0> [87233/16/63] at ata0-master UDMA66
ad2: 57241MB <WDC WD600AB-00CDB0> [116301/16/63] at ata1-master UDMA100
acd0: CDROM <ATAPI CDROM 52X> at ata3-master PIO4
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad2s1a
WARNING: / was not properly dismounted
cd0 at sym0 bus 0 target 3 lun 0
cd0: <YAMAHA CRW8824S 1.00> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: cd present [330962 x 2048 byte records]
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
--- dmesg.txt ends here ---
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200212100744.gBA7iWKY046993>