From owner-freebsd-current Fri May 8 04:55:16 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id EAA08588 for freebsd-current-outgoing; Fri, 8 May 1998 04:55:16 -0700 (PDT) (envelope-from owner-freebsd-current@FreeBSD.ORG) Received: from implode.root.com (implode.root.com [198.145.90.17]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id EAA08566 for ; Fri, 8 May 1998 04:55:12 -0700 (PDT) (envelope-from root@implode.root.com) Received: from implode.root.com (localhost [127.0.0.1]) by implode.root.com (8.8.5/8.8.5) with ESMTP id EAA13187; Fri, 8 May 1998 04:53:38 -0700 (PDT) Message-Id: <199805081153.EAA13187@implode.root.com> To: Stephen Roome cc: "Dan Ts'o" , freebsd-current@FreeBSD.ORG Subject: Re: Intel Etherexpress PRO/100+ PCI In-reply-to: Your message of "Fri, 08 May 1998 10:03:45 BST." From: David Greenman Reply-To: dg@root.com Date: Fri, 08 May 1998 04:53:38 -0700 Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >On Thu, 7 May 1998, Dan Ts'o wrote: >> > As I understand it, the PRO/100+ is just a PRO/100B, but fabricated >> > differently -- they figured out how to do it with one less chip. But >> > the interface is the same. >> >> An Intel support engineer told me that, although very similar, the >> Pro/100+ and Pro/100B are not identical at the software/driver level and >> that minor changes would probably be necessary to fully support the Pro/100+. >> He said that (at the time), since the Pro/100B was still on the market that >> if I was concerned, I should get the Pro/100B instead to avoid problems. > >We've got a couple of Pro/100+'s here and they don't work quite as >expected with the fxp driver. > >Occasionaly the cards stop responding to anything from the network (i.e. >they become 100% useless!), the machine is fine, but generally needs a >reboot before the card will function properly again. A couple of questions: Which version of FreeBSD is running on those machines? Are you sure that the cards are Pro/100+'s and not Pro/100B's? They look very similar, except the 100B has an extra chip. Are you using the cards in 10Mbps mode or 100Mbps mode? Are they connected to a hub or a switch? -DG David Greenman Co-founder/Principal Architect, The FreeBSD Project To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message