From owner-freebsd-questions  Wed Feb  5 23:22:38 1997
Return-Path: <owner-questions>
Received: (from root@localhost)
          by freefall.freebsd.org (8.8.5/8.8.5) id XAA22140
          for questions-outgoing; Wed, 5 Feb 1997 23:22:38 -0800 (PST)
Received: from gmu.edu (portal.gmu.edu [129.174.1.8])
          by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id XAA22096
          for <freebsd-questions@FreeBSD.ORG>; Wed, 5 Feb 1997 23:22:33 -0800 (PST)
Received: from [206.37.28.224] by gmu.edu; (5.65v3.2/1.1.3.9/GMUv7)
	id AA29412; Thu, 6 Feb 1997 02:22:24 -0500
Message-Id: <32F9B0D3.1D2F@gmu.edu>
Date: Thu, 06 Feb 1997 02:22:11 -0800
From: "Thomas A. Moulton" <tmoulton@gmu.edu>
Reply-To: tmoulton@gmu.edu
X-Mailer: Mozilla 3.01Gold (Win95; I)
Mime-Version: 1.0
To: freebsd-questions@FreeBSD.ORG
Subject: Troubleshooting modem dialup
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-questions@FreeBSD.ORG
X-Loop: FreeBSD.org
Precedence: bulk

I have a USR Sportster 28.8 modem.  You write in your Troubleshooting
page...

> 1.3.7.2. Try Dialing In
> 
> Try dialing into the system; be sure to use 8 bits, no parity, 1 stop bit on the remote system. If you do not get a prompt right away, or get
> garbage, try pressing <Enter> about once per second. If you still do not see a login: prompt after a while, try sending a BREAK. If you are
> using a high-speed modem to do the dialing, try dialing again after locking the dialing modem's interface speed (via AT&B1 on a USR Sportster,
> for example).


What is the AT command for the BREAK signal for a USR Sportster modem? 
I cannot find this in my manual.

-- 
*****************************************************************
** Thomas Moulton					       **
** ----------------------------------------------------------- **
** e-mail : tmoulton@gmu.edu                                   **
*****************************************************************