Date: Wed, 29 Aug 2001 02:10:01 -0400 (EDT) From: <doug@safeport.com> To: Warner Losh <imp@harmony.village.org> Cc: FreeBSD <freebsd-stable@FreeBSD.ORG> Subject: Re: IRQ Problems with Stable Message-ID: <Pine.BSF.4.21.0108290157200.77843-200000@pemaquid.safeport.com> In-Reply-To: <200108290456.f7T4usn08635@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Ok Warner here is the info. I am not sure about pciconf, I assumed pciconf -l would give the appropriate 3-tuples. If this is wrong let me know and I will re-do. I am done for the evening - back tomorrow Doug On Tue, 28 Aug 2001, Warner Losh wrote: > In message <Pine.BSF.4.21.0108290010240.77843-100000@pemaquid.safeport.com> doug@safeport.com writes: > : no cards do not work. Nothing is recognized during boot, no interrupts are > : generated taking cards in and out. Trying to assign an IP address with ifconfig > : gets an error saying the interface does not exist. > > ok. I'll need some more information. > > dmesg of a -v boot kind of lengthy so it is attached. This is from the syslog, I stripped the timestamp. > pciconf -r pciX:Y:Z 0:0xff (X:Y:Z is the pci bus address of pcic0 > and pcic1) zeus:/usr/home/doug# pciconf -l chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x12358086 rev=0x02 hdr=0x00 chip1@pci0:1:0: class=0x068000 card=0x00000000 chip=0x12348086 rev=0x03 hdr=0x00 none0@pci0:2:0: class=0x030000 card=0x00000000 chip=0x000310c8 rev=0x02 hdr=0x00 pcic0@pci0:4:0: class=0x060500 card=0x00000000 chip=0x11001013 rev=0xee hdr=0x00 zeus:/usr/home/doug# pciconf -r pci0:0:0 0:0xff 0x12358086 0x22000006 0x06000002 0x00002000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00410041 0x00000000 0x01555040 0x55550000 0x0a0a0a02 0x00000000 0x00000001 0x00000000 0x000a0000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x0000f000 zeus:/usr/home/doug# pciconf -r pci0:1:0 0:0xff 0x12348086 0x0280000f 0x06800003 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00002100 0xf1780048 0x00000000 0x00000000 0x00000000 0x00000000 0x00008080 0x00000000 0x00040000 0x0000a307 0x00000005 0x04010000 0x00000003 0xe0800000 0x00000000 0x00000000 0x00280404 0x3f07ff80 0x00000006 0x03300220 0xfff70000 0x000003f1 0x00000000 0x000000ff 0x00100060 0x00000000 0x0000002a 0x0002ff0e 0x00ff02ff 0xff161010 0x42022003 0x00000000 0x00000000 0x003e00a0 0xff11de42 0x02060090 0x00a950fb 0x00000000 0x00000000 0x00000000 0x00000000 0x01f1dfe2 0x00ffffc4 0x00000000 0x00000f10 0x00000000 > pccardc redreg pccardc rdreg Registers for slot 0 00: 82 f3 50 00 00 08 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 00 80 00 00 00 00 00 00 02 2e 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 25 09 30: 00 00 00 00 00 00 00 00 00 00 01 03 02 01 09 02 pccardc: /dev/card1: Device not configured _____ Douglas Denault doug@safeport.com Voice: 301-469-8766 Fax: 301-469-0601 [-- Attachment #2 --] Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RC #1: Tue Aug 28 12:58:13 EDT 2001 doug@pemaquid.safeport.com:/usr/obj/usr/home/fbsd/stable/src/sys/ZEUS Calibrating clock(s) ... TSC clock: 167045353 Hz, i8254 clock: 1193183 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P55C (167.05-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 41943040 (40960K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x004a4000 - 0x027f7fff, 37044224 bytes (9044 pages) avail memory = 36294656 (35444K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f5660 bios32: Entry = 0xfd239 (c00fd239) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x213 pnpbios: Found PnP BIOS data at 0xc00f54a0 pnpbios: Entry = f0000:b6f2 Rev = 1.0 pnpbios: Event flag at f954f Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc047e000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x800008d4 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12358086) apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.1, connected at v1.1 npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 128932439 bytes/sec bzero() bandwidth = 181785129 bytes/sec pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x1235, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x1234, revid=0x03 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x10c8, dev=0x0003, revid=0x02 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base 3fc00000, size 22 found-> vendor=0x1013, dev=0x1100, revid=0xee class=06-05-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base 000003e0, size 2 pci0: <PCI bus> on pcib0 chip1: <PCI to Other bridge (vendor=8086 device=1234)> at device 1.0 on pci0 pci0: <NeoMagic MagicGraph 128ZV SVGA controller> (vendor=0x10c8, dev=0x0003) at 2.0 pci_cfgintr: can't route an interrupt to 0:4 INTA pcic0: <Cirrus Logic PD6729/6730 PC-Card Controller> port 0x3e0-0x3e3 at device 4.0 on pci0 pci_cfgintr: can't route an interrupt to 0:4 INTA pcic0: No PCI interrupt routed, trying ISA. pcic0: Polling mode pccard0: <PC Card bus (classic)> on pcic0 isa0: <ISA bus> on motherboard ex_isa_identify() pcic-: pcic0 exists, using next available unit number pcic-: pcic1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 ata0: mask=03 status0=52 status1=00 ata0: mask=03 ostat0=52 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=14 b=eb ata0: mask=03 status0=52 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=09 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed ata1 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff last message repeated 5 times aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0067 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic1: Cannot get I/O range pcic1 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic2: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03123f3f 0..786=787 cylinders, 0..63=64 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 684040, tty 631092, net 671092 bpf: sl0 attached bpf: faith0 attached Creating DISK ad0 ad0: <IBM-DDLA-21620/A20G40> ATA-3 disk at ata0-master ad0: 1551MB (3177216 sectors), 3152 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, BIOSPIO ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0 ad0: 1551MB <IBM-DDLA-21620> [3152/16/63] at ata0-master BIOSPIO ata0-slave: piomode=3 dmamode=1 udmamode=-1 dmaflag=1 acd0: <CD-ROM CDR_N110/1.08> CDROM drive at ata0 as slave acd0: read 1722KB/s (1722KB/s), 128KB buffer, BIOSPIO acd0: Reads: CD-DA acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 3177215, size 3177153 : OK start_init: trying /sbin/init ntpd[126]: ntpd 4.0.99b Mon Aug 27 21:08:05 EDT 2001 (1) ntpd[126]: using kernel phase-lock loop 2040 ntpd[126]: using kernel phase-lock loop 2041 Linux-ELF exec handler installed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0108290157200.77843-200000>