Date: Tue, 17 Nov 1998 10:17:46 -0500 (EST) From: Doug Ledford <dledford@redhat.com> To: Robert Baller <rdballer@home.com> Cc: aic7xxx@FreeBSD.ORG Subject: Re: aic7xxx driver 5.0.19 -> 5.1.12 panic kernel with AHA2742T Message-ID: <Pine.LNX.4.04.9811171017220.18166-100000@kabal.redhat.com> In-Reply-To: <362BE133.3BB81D37@home.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 19 Oct 1998, Robert Baller wrote:
> I was running the 4.1 aic7xxx code on a Linux 2.0.34 system without a
> problem. My system is an older EISA/PCI (neptune chipset) TYAN board.
>
> The Adaptec SCSI adapter is a AHA2742T (Rev E chip Twin Channel) card.
>
> When I booted the 2.0.34 Debian Linux boot disk which has the 5.0.19
> aic7xxx driver linked into it the driver paniced the kernel. I then
> obtained a 2.0.35 source tree and updated the driver to 5.1.2 and the
> following panic occurs:
>
> (scsi0) <Adaptec AHA-274X SCSI host adapter> found at EISA slot 1
> (scsi0) Twin Channel, A SCSI ID 7, B SCSI ID 7, 4/255 SCBs
> (scsi0) Downloading sequencer code... 423 instructions downloaded
> (scsi0) BRKADRINT error(0xa)
> Illegal Sequencer Address referenced
> Sequencer Ram Parity Error
> (scsi0) SEQADDR=0x1a8
> Kernel panic: aic7xxx: unrecoverable BRKADRINT.
This was fixed in the 5.1.4 driver version.
Doug Ledford <dledford@redhat.com>
Opinions expressed are my own, but
they should be everybody's.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.04.9811171017220.18166-100000>