Date: Mon, 8 Mar 2004 09:49:04 -0600 From: "Schroeder, AJ" <Aaron.Schroeder@qg.com> To: "'freebsd-questions@freebsd.org'" <freebsd-questions@freebsd.org> Subject: Cdrecord -scanbus problem... Message-ID: <025596A38A894B45AFE62346A6BF474609CEB176@waexch1.qgraph.com>
next in thread | raw e-mail | index | archive | help
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_000_01C40524.E21E13C0
Content-Type: text/plain
Hello all,
I just recently upgraded my system to 5.2-RELEASE, as evidenced by uname -a:
FreeBSD mephisto.qg.com 5.2-RELEASE FreeBSD 5.2-RELEASE #0: Tue Jan 27
16:05:26 CST 2004 root@mephisto.qg.com:/usr/obj/usr/src/sys/MEPHISTO
i386
I was able to burn CDs in my previous installation, but now I am getting
nothing but trouble with cdrecord whenever I try to execute it, so I decided
to try scanning the bus, and here is my output:
[root@mephisto root]# cdrecord -scanbus
Cdrecord 2.00.3 (i386-unknown-freebsd5.2) Copyright (C) 1995-2002
J\x{FFFF}rg Schilling
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are
root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
[root@mephisto root]#
I looked in /dev and I saw all the devices defined that I needed, like:
crw-r----- 1 root operator 4, 18 Jan 27 16:58 acd0
crw-r----- 1 root operator 4, 19 Jan 27 16:58 acd1
Cdrecord is installed along with xcdroast and other gui front-end apps, all
of them fail. Both of the drives are good because I can mount CDs in them. I
am also attaching a copy of my /var/run/dmesg.boot and a copy of my kernel
config in case I did something wrong there.
Any help on this matter would be appreciated greatly, also, please cc me, I
am not a part of this list.
Thanks,
AJ Schroeder
------_=_NextPart_000_01C40524.E21E13C0
Content-Type: application/octet-stream;
name="dmesg.boot"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.boot"
Copyright (c) 1992-2004 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, =
1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 5.2-RELEASE #0: Tue Jan 27 16:05:26 CST 2004=0A=
root@mephisto.qg.com:/usr/obj/usr/src/sys/MEPHISTO=0A=
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0865000.=0A=
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0865294.=0A=
Timecounter "i8254" frequency 1193182 Hz quality 0=0A=
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.25-MHz 686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0xf24 Stepping =3D 4=0A=
=
Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P=
GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>=0A=
real memory =3D 268173312 (255 MB)=0A=
avail memory =3D 250859520 (239 MB)=0A=
Pentium Pro MTRR support enabled=0A=
npx0: [FAST]=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
acpi0: <D845PT PT84510A> on motherboard=0A=
pcibios: BIOS version 2.10=0A=
Using $PIR table, 13 entries at 0xc00f2c40=0A=
acpi0: Power Button (fixed)=0A=
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0A=
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0=0A=
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0=0A=
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0=0A=
device_probe_and_attach: acpi_cpu1 attach returned 6=0A=
acpi_button0: <Power Button> on acpi0=0A=
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=0A=
pci0: <ACPI PCI bus> on pcib0=0A=
pcib0: slot 31 INTD is routed to irq 3=0A=
pcib0: slot 31 INTB is routed to irq 9=0A=
pcib0: slot 31 INTC is routed to irq 10=0A=
pcib0: slot 31 INTB is routed to irq 9=0A=
agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at =
device 0.0 on pci0=0A=
pcib1: <PCI-PCI bridge> at device 1.0 on pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pcib0: slot 1 INTA is routed to irq 11=0A=
pcib1: slot 0 INTA is routed to irq 11=0A=
pci1: <display, VGA> at device 0.0 (no driver attached)=0A=
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0=0A=
pci2: <ACPI PCI bus> on pcib2=0A=
pcib2: slot 8 INTA is routed to irq 11=0A=
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f =
mem 0xfeaff000-0xfeafffff irq 11 at device 8.0 on pci2=0A=
fxp0: Ethernet address 00:03:47:28:7e:64=0A=
miibus0: <MII bus> on fxp0=0A=
inphy0: <i82562ET 10/100 media interface> on miibus0=0A=
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
isab0: <PCI-ISA bridge> at device 31.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device =
31.1 on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata0: [MPSAFE]=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
ata1: [MPSAFE]=0A=
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port =
0xef40-0xef5f irq 3 at device 31.2 on pci0=0A=
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)=0A=
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port =
0xef80-0xef9f irq 10 at device 31.4 on pci0=0A=
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 2 ports with 2 removable, self powered=0A=
uhub2: Intel product 0x1122, class 9/0, rev 1.10/0.00, addr 2=0A=
uhub2: 4 ports with 4 removable, self powered=0A=
pcm0: <Intel ICH2 (82801BA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 9 at =
device 31.5 on pci0=0A=
pcm0: <Analog Devices AD1885 AC97 Codec>=0A=
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model IntelliMouse, device ID 3=0A=
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port =
0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
sio0 port 0x3f8-0x3ff irq 4 on acpi0=0A=
sio0: type 16550A=0A=
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/8 bytes threshold=0A=
ppbus0: <Parallel port bus> on ppc0=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0=0A=
device_probe_and_attach: acpi_cpu1 attach returned 6=0A=
orm0: <Option ROMs> at iomem =
0xca000-0xcafff,0xc9000-0xc9fff,0xc0000-0xc8fff on isa0=0A=
pmtimer0 on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio1: configured irq 3 not in bitmap of probed irqs 0=0A=
sio1: port may not be enabled=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0=0A=
Timecounter "TSC" frequency 2392247664 Hz quality 800=0A=
Timecounters tick every 10.000 msec=0A=
GEOM: create disk ad0 dp=3D0xc2db4a60=0A=
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100=0A=
ata1-master: WARNING - SETFEATURES recovered from missing interrupt=0A=
acd0: CDRW <SONY CD-RW CRX220E1> at ata1-master PIO4=0A=
acd1: CDROM <CDU5211> at ata1-slave PIO4=0A=
pcm0: measured ac97 link rate at 55945 Hz=0A=
Mounting root from ufs:/dev/ad0s1a=0A=
------_=_NextPart_000_01C40524.E21E13C0
Content-Type: application/octet-stream;
name="MEPHISTO"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="MEPHISTO"
#=0A=
# GENERIC -- Generic kernel configuration file for FreeBSD/i386=0A=
#=0A=
# For more information on this file, please read the handbook section =
on=0A=
# Kernel Configuration Files:=0A=
#=0A=
# =
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-c=
onfig.html=0A=
#=0A=
# The handbook is also available locally in /usr/share/doc/handbook=0A=
# if you've installed the doc distribution, otherwise always see the=0A=
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the=0A=
# latest information.=0A=
#=0A=
# An exhaustive list of options and more detailed explanations of =
the=0A=
# device lines is also present in the ../../conf/NOTES and NOTES files. =
=0A=
# If you are in doubt as to the purpose or necessity of a line, check =
first =0A=
# in NOTES.=0A=
#=0A=
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.394.2.2 2003/12/07 23:52:53 =
scottl Exp $=0A=
=0A=
machine i386=0A=
cpu I686_CPU=0A=
ident MEPHISTO=0A=
=0A=
#To statically compile in device wiring instead of =
/boot/device.hints=0A=
#hints "GENERIC.hints" #Default places to look for devices.=0A=
=0A=
#makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols=0A=
=0A=
options SCHED_4BSD #4BSD scheduler=0A=
options INET #InterNETworking=0A=
options FFS #Berkeley Fast Filesystem=0A=
options SOFTUPDATES #Enable FFS soft updates support=0A=
options UFS_ACL #Support for access control lists=0A=
options UFS_DIRHASH #Improve performance on big directories=0A=
options MD_ROOT #MD is a potential root device=0A=
options NFSCLIENT #Network Filesystem Client=0A=
options NFSSERVER #Network Filesystem Server=0A=
options NFS_ROOT #NFS usable as /, requires NFSCLIENT=0A=
options MSDOSFS #MSDOS Filesystem=0A=
options CD9660 #ISO 9660 Filesystem=0A=
options PROCFS #Process filesystem (requires PSEUDOFS)=0A=
options PSEUDOFS #Pseudo-filesystem framework=0A=
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]=0A=
options COMPAT_FREEBSD4 #Compatible with FreeBSD4=0A=
options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI=0A=
options KTRACE #ktrace(1) support=0A=
options SYSVSHM #SYSV-style shared memory=0A=
options SYSVMSG #SYSV-style message queues=0A=
options SYSVSEM #SYSV-style semaphores=0A=
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time =
extensions=0A=
options KBD_INSTALL_CDEV # install a CDEV entry in /dev=0A=
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug=0A=
# output. Adds ~128k to driver.=0A=
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug=0A=
# output. Adds ~215k to driver.=0A=
options CPU_ENABLE_SSE # used by DVD=0A=
=0A=
=0A=
# Debugging for use in -current=0A=
#options DDB #Enable the kernel debugger=0A=
#options INVARIANTS #Enable calls of extra sanity checking=0A=
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, =
required by INVARIANTS=0A=
#options WITNESS #Enable checks to detect deadlocks and cycles=0A=
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed=0A=
=0A=
device isa=0A=
device eisa=0A=
device pci=0A=
=0A=
# Floppy drives=0A=
device fdc=0A=
=0A=
# ATA and ATAPI devices=0A=
device ata=0A=
device atadisk # ATA disk drives=0A=
device ataraid # ATA RAID drives=0A=
device atapicd # ATAPI CDROM drives=0A=
device atapifd # ATAPI floppy drives=0A=
device atapist # ATAPI tape drives=0A=
options ATA_STATIC_ID #Static device numbering=0A=
=0A=
# SCSI peripherals=0A=
device scbus # SCSI bus (required for SCSI)=0A=
device ch # SCSI media changers=0A=
device da # Direct Access (disks)=0A=
device sa # Sequential Access (tape etc)=0A=
device cd # CD=0A=
device pass # Passthrough device (direct SCSI access)=0A=
device ses # SCSI Environmental Services (and SAF-TE)=0A=
=0A=
# atkbdc0 controls both the keyboard and the PS/2 mouse=0A=
device atkbdc # AT keyboard controller=0A=
device atkbd # AT keyboard=0A=
device psm # PS/2 mouse=0A=
=0A=
device vga # VGA video card driver=0A=
=0A=
device splash # Splash screen and screen saver support=0A=
=0A=
# syscons is the default console driver, resembling an SCO console=0A=
device sc=0A=
=0A=
# Enable this for the pcvt (VT220 compatible) console driver=0A=
#device vt=0A=
#options XSERVER # support for X server on a vt console=0A=
#options FAT_CURSOR # start with block cursor=0A=
=0A=
device agp # support several AGP chipsets=0A=
=0A=
# Floating point support - do not disable.=0A=
device npx=0A=
=0A=
# Power management support (see NOTES for more options)=0A=
#device apm=0A=
# Add suspend/resume support for the i8254.=0A=
device pmtimer=0A=
=0A=
# Serial (COM) ports=0A=
device sio # 8250, 16[45]50 based serial ports=0A=
=0A=
# Parallel port=0A=
device ppc=0A=
device ppbus # Parallel port bus (required)=0A=
device lpt # Printer=0A=
device plip # TCP/IP over parallel=0A=
device ppi # Parallel port interface device=0A=
#device vpo # Requires scbus and da=0A=
=0A=
# If you've got a "dumb" serial or parallel PCI card that is=0A=
# supported by the puc(4) glue driver, uncomment the following=0A=
# line to enable it (connects to the sio and/or ppc drivers):=0A=
#device puc=0A=
=0A=
# PCI Ethernet NICs that use the common MII bus controller code.=0A=
# NOTE: Be sure to keep the 'device miibus' line in order to use these =
NICs!=0A=
device miibus # MII bus support=0A=
device fxp # Intel EtherExpress PRO/100B (82557, 82558)=0A=
=0A=
# ISA devices that use the old ISA shims=0A=
#device le=0A=
=0A=
# Pseudo devices - the number indicates how many units to allocate.=0A=
device random # Entropy device=0A=
device loop # Network loopback=0A=
device ether # Ethernet support=0A=
device sl # Kernel SLIP=0A=
device ppp # Kernel PPP=0A=
device tun # Packet tunnel.=0A=
device pty # Pseudo-ttys (telnet etc)=0A=
device md # Memory "disks"=0A=
device gif # IPv6 and IPv4 tunneling=0A=
device faith # IPv6-to-IPv4 relaying (translation)=0A=
=0A=
# The `bpf' device enables the Berkeley Packet Filter.=0A=
# Be aware of the administrative consequences of enabling this!=0A=
device bpf # Berkeley packet filter=0A=
=0A=
# USB support=0A=
device uhci # UHCI PCI->USB interface=0A=
device ohci # OHCI PCI->USB interface=0A=
device usb # USB Bus (required)=0A=
#device udbp # USB Double Bulk Pipe devices=0A=
device ugen # Generic=0A=
device uhid # "Human Interface Devices"=0A=
device ukbd # Keyboard=0A=
device ulpt # Printer=0A=
device umass # Disks/Mass storage - Requires scbus and da=0A=
device ums # Mouse=0A=
device urio # Diamond Rio 500 MP3 player=0A=
device uscanner # Scanners=0A=
=0A=
device pcm # builds PCI soundblaster support=0A=
------_=_NextPart_000_01C40524.E21E13C0--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?025596A38A894B45AFE62346A6BF474609CEB176>