Date: Mon, 28 Nov 2005 08:10:03 -0500 From: John Baldwin <jhb@freebsd.org> To: freebsd-acpi@freebsd.org Cc: Kevin Day <toasty@dragondata.com> Subject: Re: ACPI hang on 6.0-RELEASE on Compaq Proliant ML530 (866MHz Xeon) Message-ID: <200511280810.04087.jhb@freebsd.org> In-Reply-To: <5A00483D-8A89-4180-B982-0F9437198200@dragondata.com> References: <5A00483D-8A89-4180-B982-0F9437198200@dragondata.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Saturday 26 November 2005 11:18 am, Kevin Day wrote: > Hangs on boot after displaying kernel copyright notice with ACPI > enabled. Works fine with ACPI disabled. > > Server has two CPUs, but hang occurs with or without SMP kernel. > > > > acpidump at http://www.dragondata.com/~toasty/toasty-ml530.asl > > > dmesg from working config: Any chance you could use a serial console to capture the dmesg from a booth= =20 with ACPI enabled? > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 > root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC > MPTable: <COMPAQ PROLIANT > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel Pentium III Xeon (863.94-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 > > Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE, > MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory =3D 2147467264 (2047 MB) > avail memory =3D 2096672768 (1999 MB) > ioapic0: Changing APIC ID to 8 > ioapic0: Assuming intbase of 0 > ioapic0 <Version 1.1> irqs 0-34 on motherboard > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > cpu0 on motherboard > pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard > pci0: <PCI bus> on pcib0 > pci0: <base peripheral> at device 3.0 (no driver attached) > pci0: <display, VGA> at device 5.0 (no driver attached) > pci0: <simple comms> at device 8.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 15.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <ServerWorks ROSB4 UDMA33 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pcib2: <MPTable Host-PCI bridge> pcibus 2 on motherboard > pci2: <PCI bus> on pcib2 > em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port > 0x3000-0x303f mem 0xf7ee0000-0xf7efffff irq 24 at device 6.0 on pci2 > em0: Ethernet address: 00:07:e9:13:5c:82 > em0: Speed:N/A Duplex:N/A > em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port > 0x3040-0x307f mem 0xf7ec0000-0xf7edffff irq 24 at device 6.1 on pci2 > em1: Ethernet address: 00:07:e9:13:5c:83 > em1: Speed:N/A Duplex:N/A > pcib255: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 255 on > motherboard > pci255: <PCI bus> on pcib255 > pcib5: <MPTable Host-PCI bridge> pcibus 5 on motherboard > pci5: <PCI bus> on pcib5 > sym0: <896> port 0x4000-0x40ff mem 0xf7fffc00-0xf7ffffff, > 0xf7ffc000-0xf7ffdfff irq 22 at device 4.0 on pci5 > sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking > sym0: [GIANT-LOCKED] > sym1: <896> port 0x4400-0x44ff mem 0xf7ffbc00-0xf7ffbfff, > 0xf7ff8000-0xf7ff9fff irq 21 at device 4.1 on pci5 > sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking > sym1: [GIANT-LOCKED] > eisa0: <EISA bus> on motherboard > mainboard0: <CPQ0712 (System Board)> on eisa0 slot 0 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff, > 0xee000-0xeffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 > drq 2 on isa0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > Timecounter "TSC" frequency 863936862 Hz quality 800 > Timecounters tick every 1.000 msec > acd0: CDROM <Compaq CRD-8402B/1.03> at ata0-master PIO4 > Waiting 5 seconds for SCSI devices to settle > da1 at sym0 bus 0 target 2 lun 0 > da1: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device > da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged > Queueing Enabled > da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) > da0 at sym0 bus 0 target 0 lun 0 > da0: <COMPAQ BD01864552 3B08> Fixed Direct Access SCSI-2 device > da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged > Queueing Enabled > da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C) > da2 at sym0 bus 0 target 3 lun 0 > da2: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device > da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged > Queueing Enabled > da2: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C) > da3 at sym0 bus 0 target 4 lun 0 > da3: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device > da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged > Queueing Enabled > da3: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) > da4 at sym0 bus 0 target 5 lun 0 > da4: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device > da4: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged > Queueing Enabled > da4: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) > Trying to mount root from ufs:/dev/da0s1a > em0: link state changed to UP > em0: promiscuous mode enabled > em0: promiscuous mode disabled > em0: promiscuous mode enabled > em0: promiscuous mode disabled =2D-=20 John Baldwin <jhb@FreeBSD.org> =A0<>< =A0http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" =A0=3D =A0http://www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511280810.04087.jhb>