Date: Fri, 28 Jan 2005 09:00:30 +0100 From: =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@DeepCore.dk> To: Dave Myron <lists@orangechicken.com> Cc: freebsd-hardware@freebsd.org Subject: Re: Problem with FastTrak S150 SX4-M Message-ID: <41F9F11E.2030006@DeepCore.dk> In-Reply-To: <20050126183025.2550443D5D@mx1.FreeBSD.org> References: <20050126183025.2550443D5D@mx1.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Dave Myron wrote: > It's not red but it is the PRI_RAID IDE connector. I have the controlle= r set > to IDE in the BIOS so it should act just as any other IDE controller > (according to the manual and many other sources). >=20 > I have two hard drives on the primary IDE (not on the controller) and a= CD > drive on the secondary IDE (also not on the controller). Then I have tw= o > more hard drives on the PRI_RAID channel (which *is* the P-ATA channel = on > the controller). Those two drives are getting the failure (or at least = one > is - see the error messages in my original text).=20 >=20 > I wish I had an S-ATA drive to test with so that I could verify that it= 's a > problem with the P-ATA part of this controller.=20 Thats a known problem, its partly fixed in -current, the real fix is in=20 the works. Try to take /sys/dev/ata from a fresh -current and let me=20 know if that helps you. --=20 -S=F8ren
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41F9F11E.2030006>