Date: Sun, 30 Nov 2025 21:38:06 -0800 From: Adrian Chadd <adrian.chadd@gmail.com> To: FreeBSD User <freebsd@walstatt-de.de> Cc: "Bjoern A. Zeeb" <bz@freebsd.org>, freebsd-wireless@freebsd.org Subject: Re: 15-STABLE: if_iwlwifi dysfunctional ... Message-ID: <CAJ-Vmo=6qHGNddLr3eTLtqnvT1Zn4-DMnoXCUM8emadoA_6-7Q@mail.gmail.com> In-Reply-To: <20251201063335.3764965e@hermann> References: <20251128104342.095ad6f4@hermann> <154050-p4o4-5p20-8019-oqr485nro170@mnoonqbm.arg> <20251129123432.57ac6f87@hermann> <6on04660-r35-q7r7-321s-31r3754q59n1@SerrOFQ.bet> <20251201063335.3764965e@hermann>
next in thread | previous in thread | raw e-mail | index | archive | help
We don't have PMF support yet sorry!
please turn that off and try again!
-adrian
On Sun, 30 Nov 2025 at 21:35, FreeBSD User <freebsd@walstatt-de.de> wrote:
>
> On Sun, 30 Nov 2025 23:27:40 +0000 (UTC)
> "Bjoern A. Zeeb" <bz@FreeBSD.org> wrote:
>
> > On Sat, 29 Nov 2025, FreeBSD User wrote:
> >
> > > <4>WPA: Failed to configure IGTK to the driver
> > > <3>RSN: Failed to configure IGTK
> >
> > What's your wpa_supplicant.conf file looking like.
> >
> > Do you by any chance change any of these two variables?
> > pmf=0
> > ieee80211w=0
> >
> >
>
> [... /etc/rc.conf ...]
> wlans_iwlwifi0="wlan0"
> ifconfig_wlan0="DHCP WPA"
> ifconfig_wlan0_ipv6="inet6 accept_rtadv -ifdisabled nud -no_radr auto_linklocal"
> create_args_wlan0="country DE regdomain ETSI"
> [...]
>
> [... /etc/wpa_supplicant.conf ...]
>
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=wheel
> #eapol_version=2
> ap_scan=1
> # Protected Management Frames default
> # per network selectable via ieee80211w
> # 0: disabled
> # 1: enabled
> # 2: required
> pmf=2
>
> # AP-Wifi
> network={
> id_str="AP-WiFi"
> ssid="AP-WiFi"
> auth_alg=OPEN
> key_mgmt=WPA-PSK
> pairwise=CCMP
> group=CCMP
> proto=RSN
> psk=SOME_SECRET
> }
>
> # Alt-AP
> network={
> id_str="Alt-AP"
> ssid="Alt-AP"
> auth_alg=OPEN
> key_mgmt=WPA-PSK
> pairwise=CCMP
> group=CCMP
> proto=RSN
> ieee80211w=2
> psk=SOME_SECRET_2
> }
>
> network={
> id_str="eduroam"
> ssid="eduroam"
> scan_ssid=1
> key_mgmt=WPA-EAP WPA-EAP-SHA256
> eap=PEAP TTLS TLS
> proto=RSN
> identity="IDENTITY"
> anonymous_identity="eduroam@net.net"
> ca_cert="/usr/local/etc/cacerts/certificate.pem"
> phase1="peaplabel=1"
> phase2="auth=MSCHAPV2"
> password="SECRET"
> ieee80211w=2
> }
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmo=6qHGNddLr3eTLtqnvT1Zn4-DMnoXCUM8emadoA_6-7Q>