From owner-freebsd-questions Thu Apr 15 9:24:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from destiny.erols.com (destiny.erols.com [207.96.73.65]) by hub.freebsd.org (Postfix) with ESMTP id 799D514E9C for ; Thu, 15 Apr 1999 09:24:22 -0700 (PDT) (envelope-from gandolf@destiny.erols.com) Received: from localhost (gandolf@localhost) by destiny.erols.com (8.9.2/8.6.12) with ESMTP id MAA28797; Thu, 15 Apr 1999 12:21:57 -0400 (EDT) Date: Thu, 15 Apr 1999 12:21:57 -0400 (EDT) From: Jeff Hamilton To: freebsd-questions@freebsd.org Cc: John Dowdal Subject: Network problems Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi. I'm having problems with networking under FreeBSD. I'm running 2.2.8-Stable (see dmesg output below), and my network cards are not working properly. During bootup, I get the following messages after the interfaces are ifconfiged: Apr 14 23:52:51 cc578451-A /kernel: xl0: watchdog timeout Apr 14 23:52:51 cc578451-A /kernel: fxp0: device timeout The xl0 message repeats continuosly, along with error messages from natd, and both networks are unreachable. Does anyone know anything that I can do to fix this? Please cc: me in any replies. I am not subscribed to the list. Thanks! Jeff Hamilton gandolf@destiny.erols.com dmesg from boot -sv: Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.8-STABLE #0: Wed Apr 14 21:34:14 EDT 1999 root@:/usr/src/sys/compile/gandolf.p120 Calibrating clock(s) ... i586 clock: 120309029 Hz, i8254 clock: 1193545 Hz CPU: Pentium/P54C (120.31-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf real memory = 58720256 (57344K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00238000 - 0x037fdfff, 56385536 bytes (13766 pages) avail memory = 55107584 (53816K bytes) pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00000000 pcibus_setup(1a): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=00051004) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 rev 1 on pci0:0:0 chip1 rev 1 on pci0:1:0 vga0 rev 195 on pci0:2:0 mapreg[10] type=0 addr=40000000 size=1000000. wdc0 rev 2 int a irq 14 on pci0:3:0 xl0 <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 48 int a irq 5 on pci0:19:0 mapreg[10] type=1 addr=00001080 size=0080. mapreg[14] type=0 addr=41180000 size=0080. xl0: Ethernet address: 00:10:5a:67:c1:c7 xl0: media options word: a xl0: probing for a PHY xl0: checking address: 0 xl0: found PHY at address 0, vendor id: 0 device id: 0 xl0: PHY type: xl0: found 10baseT xl0: found 100baseTX xl0: autoneg complete, link status good (half-duplex, 10Mbps) bpf: xl0 attached fxp0 rev 5 int a irq 9 on pci0:20:0 mapreg[10] type=0 addr=41100000 size=1000. mapreg[14] type=1 addr=00001020 size=0020. mapreg[18] type=0 addr=41000000 size=100000. reg16: virtual=0xf4cba000 physical=0x41100000 size=0x1000 fxp0: Ethernet address 00:04:ac:25:eb:29 bpf: fxp0 attached pci0: uses 17830016 bytes of memory from 40000000 upto 4118007f. pci0: uses 160 bytes of I/O space from 1020 upto 10ff. Probing for PnP devices: Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 No Plug-n-Play devices were found Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0065 kbdio: DIAGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: BIOS video mode:3 sc0: VGA registers upon power-up 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c ae 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: video mode:24 sc0: VGA registers in BIOS for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: VGA registers to be used for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: rows_offset:1 sc0: VGA color <16 virtual consoles, flags=0x0> lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface bpf: lp0 attached psm0: current command byte:0065 kbdio: TEST_AUX_PORT status:0000 kbdio: RESET_AUX return code:00fa kbdio: RESET_AUX status:00aa kbdio: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: status 10 00 64 psm: data 08 00 00 psm: data 08 00 00 psm: status 00 02 64 psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 not found at 0x2f8 mss_probe: no address supplied, try default 0x530 mss_detect error, busy still set (0xff) sb_probe: no address supplied, try defaults (0x220,0x240) pcm0 at 0x220 irq 10 drq 1 on isa ESS688 (rev 6) aha0: Rev 45 (AHA-1542CF BIOS v2.01) VB.0, enabling mailbox, enabling residuals aha0: reading board settings, dma=5 int=11 id=7 100 nSEC ok, using 150 nSEC aha0 at 0x330-0x333 irq 11 drq 5 on isa (aha0:0:0): "IBM OEM 0664M1H CI DG04" type 0 fixed SCSI 2 sd0(aha0:0:0): Direct-Access 1920MB (3933040 512 byte sectors) sd0(aha0:0:0): with 2857 cyls, 15 heads, and an average 91 sectors/track (aha0:1:0): "SEAGATE ST41650 TX DG01" type 0 fixed SCSI 1 sd1(aha0:1:0): Direct-Access 1357MB (2780030 512 byte sectors) sd1(aha0:1:0): with 2107 cyls, 15 heads, and an average 87 sectors/track (aha0:2:0): "SEAGATE ST41650 TX DG01" type 0 fixed SCSI 1 sd2(aha0:2:0): Direct-Access 1357MB (2780030 512 byte sectors) sd2(aha0:2:0): with 2107 cyls, 15 heads, and an average 87 sectors/track (aha0:3:0): "SEAGATE ST41650 TX DG01" type 0 fixed SCSI 1 sd3(aha0:3:0): Direct-Access 1357MB (2780030 512 byte sectors) sd3(aha0:3:0): with 2107 cyls, 15 heads, and an average 87 sectors/track (aha0:5:0): "TOSHIBA CD-ROM XM-4101TA 0754" type 5 removable SCSI 2 cd0(aha0:5:0): CD-ROM cd present [258945 x 2048 byte records] (aha0:6:0): "SONY SDT-5000 3.23" type 1 removable SCSI 2 st0(aha0:6:0): Sequential-Access density code 0x13, drive empty wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: CMD640B workaround enabled wdc0: unit 0 (wd0): wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): wd2: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S wdc1: unit 1 (atapi): , removable, accel, dma, iordy acd0: drive speed 689KB/sec, 256KB cache acd0: supported read types: CD-DA acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM unknown medium, unlocked fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface joy0 at 0x201 on isa joy0: joystick imasks: bio c008c840, tty c0031492, net c0060220 BIOS Geometries: 0:020a3f3f 0..522=523 cylinders, 0..63=64 heads, 1..63=63 sectors 1:026a3f3f 0..618=619 cylinders, 0..63=64 heads, 1..63=63 sectors 2:020a3f3f 0..522=523 cylinders, 0..63=64 heads, 1..63=63 sectors 0 accounted for Device configuration finished. Intel Pentium detected, installing workaround for F00F bug Linux-ELF exec handler installed bpf: tun0 attached bpf: lo0 attached ccd0-3: Concatenated disk drivers IP packet filtering initialized, divert enabled, logging disabled Considering FFS root f/s. wd0s1: type 0xa5, start 63, end = 201599, size 201537 : OK wd0s2: type 0xa5, start 201600, end = 2116799, size 1915200 : OK To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message