Date: Thu, 15 Apr 1999 12:21:57 -0400 (EDT) From: Jeff Hamilton <gandolf@destiny.erols.com> To: freebsd-questions@freebsd.org Cc: John Dowdal <jdowdal@destiny.erols.com> Subject: Network problems Message-ID: <Pine.BSF.4.05.9904151207010.28703-100000@destiny.erols.com>
next in thread | raw e-mail | index | archive | help
Hi.
I'm having problems with networking under FreeBSD. I'm running
2.2.8-Stable (see dmesg output below), and my network cards are not
working properly. During bootup, I get the following messages after the
interfaces are ifconfiged:
Apr 14 23:52:51 cc578451-A /kernel: xl0: watchdog timeout
Apr 14 23:52:51 cc578451-A /kernel: fxp0: device timeout
The xl0 message repeats continuosly, along with error messages from natd,
and both networks are unreachable.
Does anyone know anything that I can do to fix this?
Please cc: me in any replies. I am not subscribed to the list.
Thanks!
Jeff Hamilton
gandolf@destiny.erols.com
dmesg from boot -sv:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.8-STABLE #0: Wed Apr 14 21:34:14 EDT 1999
root@:/usr/src/sys/compile/gandolf.p120
Calibrating clock(s) ... i586 clock: 120309029 Hz, i8254 clock: 1193545 Hz
CPU: Pentium/P54C (120.31-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 58720256 (57344K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00238000 - 0x037fdfff, 56385536 bytes (13766 pages)
avail memory = 55107584 (53816K bytes)
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00000000
pcibus_setup(1a): mode1res=0x80000000 (0x80000000)
pcibus_check: device 0 is there (id=00051004)
Probing for devices on PCI bus 0:
configuration mode 1 allows 32 devices.
chip0 <generic PCI bridge (vendor=1004 device=0005 subclass=0)> rev 1 on
pci0:0:0
chip1 <generic PCI bridge (vendor=1004 device=0006 subclass=1)> rev 1 on
pci0:1:0
vga0 <VGA-compatible display device> rev 195 on pci0:2:0
mapreg[10] type=0 addr=40000000 size=1000000.
wdc0 <CMD 640B IDE> rev 2 int a irq 14 on pci0:3:0
xl0 <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 48 int a irq 5 on
pci0:19:0
mapreg[10] type=1 addr=00001080 size=0080.
mapreg[14] type=0 addr=41180000 size=0080.
xl0: Ethernet address: 00:10:5a:67:c1:c7
xl0: media options word: a
xl0: probing for a PHY
xl0: checking address: 0
xl0: found PHY at address 0, vendor id: 0 device id: 0
xl0: PHY type: <MII-compliant physical interface>
xl0: found 10baseT
xl0: found 100baseTX
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
bpf: xl0 attached
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 5 int a irq 9 on
pci0:20:0
mapreg[10] type=0 addr=41100000 size=1000.
mapreg[14] type=1 addr=00001020 size=0020.
mapreg[18] type=0 addr=41000000 size=100000.
reg16: virtual=0xf4cba000 physical=0x41100000 size=0x1000
fxp0: Ethernet address 00:04:ac:25:eb:29
bpf: fxp0 attached
pci0: uses 17830016 bytes of memory from 40000000 upto 4118007f.
pci0: uses 160 bytes of I/O space from 1020 upto 10ff.
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers in BIOS for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA registers to be used for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: rows_offset:1
sc0: VGA color <16 virtual consoles, flags=0x0>
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
bpf: lp0 attached
psm0: current command byte:0065
kbdio: TEST_AUX_PORT status:0000
kbdio: RESET_AUX return code:00fa
kbdio: RESET_AUX status:00aa
kbdio: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: status 10 00 64
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 not found at 0x2f8
mss_probe: no address supplied, try default 0x530
mss_detect error, busy still set (0xff)
sb_probe: no address supplied, try defaults (0x220,0x240)
pcm0 at 0x220 irq 10 drq 1 on isa
ESS688 (rev 6)
aha0: Rev 45 (AHA-1542CF BIOS v2.01) VB.0, enabling mailbox, enabling
residuals
aha0: reading board settings, dma=5 int=11 id=7 100 nSEC ok, using 150
nSEC
aha0 at 0x330-0x333 irq 11 drq 5 on isa
(aha0:0:0): "IBM OEM 0664M1H CI DG04" type 0 fixed SCSI 2
sd0(aha0:0:0): Direct-Access 1920MB (3933040 512 byte sectors)
sd0(aha0:0:0): with 2857 cyls, 15 heads, and an average 91 sectors/track
(aha0:1:0): "SEAGATE ST41650 TX DG01" type 0 fixed SCSI 1
sd1(aha0:1:0): Direct-Access 1357MB (2780030 512 byte sectors)
sd1(aha0:1:0): with 2107 cyls, 15 heads, and an average 87 sectors/track
(aha0:2:0): "SEAGATE ST41650 TX DG01" type 0 fixed SCSI 1
sd2(aha0:2:0): Direct-Access 1357MB (2780030 512 byte sectors)
sd2(aha0:2:0): with 2107 cyls, 15 heads, and an average 87 sectors/track
(aha0:3:0): "SEAGATE ST41650 TX DG01" type 0 fixed SCSI 1
sd3(aha0:3:0): Direct-Access 1357MB (2780030 512 byte sectors)
sd3(aha0:3:0): with 2107 cyls, 15 heads, and an average 87 sectors/track
(aha0:5:0): "TOSHIBA CD-ROM XM-4101TA 0754" type 5 removable SCSI 2
cd0(aha0:5:0): CD-ROM cd present [258945 x 2048 byte records]
(aha0:6:0): "SONY SDT-5000 3.23" type 1 removable SCSI 2
st0(aha0:6:0): Sequential-Access density code 0x13, drive empty
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: CMD640B workaround enabled
wdc0: unit 0 (wd0): <WDC AC31000F>
wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <QUANTUM FIREBALL1280A>
wd1: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <WDC AC31000F>
wd2: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 1 (atapi): <CD-ROM CDU76E/1.0c>, removable, accel, dma, iordy
acd0: drive speed 689KB/sec, 256KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM unknown medium, unlocked
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
joy0 at 0x201 on isa
joy0: joystick
imasks: bio c008c840, tty c0031492, net c0060220
BIOS Geometries:
0:020a3f3f 0..522=523 cylinders, 0..63=64 heads, 1..63=63 sectors
1:026a3f3f 0..618=619 cylinders, 0..63=64 heads, 1..63=63 sectors
2:020a3f3f 0..522=523 cylinders, 0..63=64 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Intel Pentium detected, installing workaround for F00F bug
Linux-ELF exec handler installed
bpf: tun0 attached
bpf: lo0 attached
ccd0-3: Concatenated disk drivers
IP packet filtering initialized, divert enabled, logging disabled
Considering FFS root f/s.
wd0s1: type 0xa5, start 63, end = 201599, size 201537 : OK
wd0s2: type 0xa5, start 201600, end = 2116799, size 1915200 : OK
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9904151207010.28703-100000>