Date: Tue, 25 Apr 2000 10:51:22 +0200 From: mkes@ra.rockwell.com To: hiroyu-y@ex.itc.keio.ac.jp (Hiroyuki Yamagai) Cc: freebsd-scsi@freebsd.org Subject: Re: 4.0 RELEASE on HP Kayak XU800 and HP NetServer LH 3000 Message-ID: <OFA503EB3E.C705F1F3-ONC12568CC.002FD93B@cle.ra.rockwell.com>
next in thread | raw e-mail | index | archive | help
> To my knowledge that AIC-7892 is a dual channel SCSI Controler, with BUS
A & B.
> On FreeBSD, if the B Bus BIOS is set to
>
> [Reset SCSI bus at IC Initialization -- enable]
>
> the system will panic as you posted.
> If, disabled it'll boot with out problem.
I tried to change it in the SCSI setup but it looks like there is no
separate option for BUS B (only one set of settings).
I checked at the Adaptec web site and they treat 7892 as on-board
equivalent of 2940UW card (which has single channel).
Are you sure about the B Bus ?
> By the way, when did you purchace your HP NetServer LH 3000?
Two weeks ago
> I belevie that the new models has integrated RAID Controler
> instead of AMI MegaRAID 1400 as on older LH3000.
Yes, the RAID Controler is integrated.
Regards
Mira
P.S.
> I'm interested in what Serise of MegaRaid is on th New LH3000.
> Can you post or mail me dmesg of your LH3000?
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #1: Thu Apr 20 12:29:27 CEST 2000
root@bivoj.cze.ra.rockwell.com:/usr/src/sys/compile/LOCAL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 723337131 Hz
CPU: Pentium III/Pentium III Xeon (723.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
real memory = 268369920 (262080K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di ata1
No such device: ata1
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 257220608 (251192K bytes)
Preloaded elf kernel "kernel" at 0xc0302000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc030209c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <RCC LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0x1800-0x183f mem
0xd1000000-0xd10fffff,0xcff80000-0xcff80fff irq 9 at device 6.0 on pci0
fxp0: Ethernet address 00:10:83:f9:1d:84
fxp0: supplying EUI64: 00:10:83:ff:fe:f9:1d:84
pci0: <ATI model 4759 graphics accelerator> at 7.0 irq 9
isab0: <PCI to ISA bridge (vendor=1166 device=0200)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Unknown PCI ATA controller (generic mode)> port 0x1840-0x184f at
device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pcib3: <RCC LE host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pci3: <unknown card> (vendor=0x103c, dev=0x1219) at 2.0 irq 10
pci3: <unknown card> (vendor=0x103c, dev=0x121a) at 2.1 irq 11
pcib4: <PCI to PCI bridge (vendor=8086 device=0964)> at device 3.0 on pci3
pci4: <PCI bus> on pcib4
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0x5000-0x50ff mem
0xd4108000-0xd4108fff irq 5 at device 7.0 on pci4
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
pci4: <unknown card> (vendor=0x103c, dev=0x10c1) at 8.0
amr0: <AMI MegaRAID> mem 0xe0000000-0xefffffff irq 5 at device 3.1 on pci3
amr0: firmware bios \^A\^BB 32MB memory
amrd0: <MegaRAID logical drive> on amr0
amrd0: 8677MB (17770496 sectors) RAID 0 (optimal)
amrd1: <MegaRAID logical drive> on amr0
amrd1: 34730MB (71127040 sectors) RAID 5 (optimal)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to deny, logging limited to 100 packets/entry by default
ata0-slave: ata_command: timeout waiting for intr
ata0-slave: identify failed
acd0: CDROM <CD-532E-B> at ata0-master using PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <Quantum DLT4000 D782> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/amrd0s1a
fxp0: starting DAD for fe80:0001::0210:83ff:fef9:1d84
fxp0: DAD complete for fe80:0001::0210:83ff:fef9:1d84 - no duplicates found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?OFA503EB3E.C705F1F3-ONC12568CC.002FD93B>