From owner-freebsd-stable Thu Oct 12 6:45:20 2000 Delivered-To: freebsd-stable@freebsd.org Received: from logger.gamma.ru (logger.gamma.ru [194.186.254.23]) by hub.freebsd.org (Postfix) with ESMTP id C42A837B502 for ; Thu, 12 Oct 2000 06:45:12 -0700 (PDT) Received: (from ivt@localhost) by logger.gamma.ru (8.9.3/8.9.3) id RAA28799; Thu, 12 Oct 2000 17:45:03 +0400 (MSD) From: Igor Timkin Message-Id: <200010121345.RAA28799@logger.gamma.ru> Subject: Re: adaptec 39160 In-Reply-To: <200010102054.e9AKsvZ00715@aslan.scsiguy.com> "from Justin T. Gibbs at Oct 10, 2000 08:54:57 pm" To: "Justin T. Gibbs" Date: Thu, 12 Oct 2000 17:45:02 +0400 (MSD) Cc: freebsd-stable@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL82 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > >4.1.1-stable checked out today at 14.30 GMT: > >FreeBSD news.gamma.ru 4.1.1-STABLE FreeBSD 4.1.1-STABLE #0: Wed Oct 11 18:56:1 > >9 MSD 2000 ivt@news.gamma.ru:/usr/src/sys/compile/NEWS i386 > > > >Adaptec 39160 rev.2.57.2, matherboard is ASUS P/I-P65UP5/C-P6ND, 2xPPro200. > >During boot: > > I'm still looking into why the panic occurs, but the root of your > problem is that interrupts are not being properly routed to the > second function of the 39160. If you pop into your system bios > and set the IRQ routing to use the 8259 instead of I/O APICs, > it will probably work. That has been my experience with my PR440FX > motherboard with twin PPRO 200s. BIOS don't has such options. But whith today's kernel (second channel (ahc2) without devices) 3940 seems to work: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1.1-STABLE #1: Thu Oct 12 15:55:16 MSD 2000 ivt@news.gamma.ru:/usr/src/sys/compile/NEWS Timecounter "i8254" frequency 1193182 Hz CPU: Pentium Pro (199.43-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping = 9 Features=0xfbff real memory = 536870912 (524288K bytes) avail memory = 519938048 (507752K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc02a1000. Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 isab0: at device 1.0 on pci0 isa0: on isab0 atapci0: port 0xe800-0xe80f at device 1.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ahc0: port 0xe000-0xe0ff mem 0xfa000000-0xfa000fff irq 19 at device 9.0 on pci0 aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: port 0xd800-0xd8ff mem 0xf9800000-0xf9800fff irq 18 at device 10.0 on pci0 aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc2: port 0xd400-0xd4ff mem 0xf9000000-0xf9000fff irq 9 at device 10.1 on pci0 aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs fxp0: port 0xd000-0xd01f mem 0xf8800000-0xf88fffff,0xfb000000-0xfb000fff irq 17 at device 11.0 on pci0 fxp0: Ethernet address 00:90:27:41:3d:89 ahc3: port 0xc800-0xc8ff mem 0xf8000000-0xf8000fff irq 16 at device 12.0 on pci0 aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ed0 at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 5 on isa0 ed0: address 00:00:c0:a4:2e:61, type WD8013EPC (16 bit) APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled SMP: AP CPU #1 Launched! ad0: 12416MB [25228/16/63] at ata0-master using WDMA2 Waiting 2 seconds for SCSI devices to settle ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x4 sg[0] - Addr 0x1f974284 : Length 36 (probe31:ahc2:0:1:0): SCB 8: Immediate reset. Flags = 0x6040 (probe31:ahc2:0:1:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 14 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x3 sg[0] - Addr 0x1f95ce84 : Length 36 (probe33:ahc2:0:3:0): SCB 8: Immediate reset. Flags = 0x6040 (probe33:ahc2:0:3:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 13 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x4 sg[0] - Addr 0x1f95ca84 : Length 36 (probe35:ahc2:0:5:0): SCB 8: Immediate reset. Flags = 0x6040 (probe35:ahc2:0:5:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 12 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x3 sg[0] - Addr 0x1f95c684 : Length 36 (probe37:ahc2:0:8:0): SCB 8: Immediate reset. Flags = 0x6040 (probe37:ahc2:0:8:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 11 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x3 sg[0] - Addr 0x1f95c284 : Length 36 (probe39:ahc2:0:10:0): SCB 8: Immediate reset. Flags = 0x6040 (probe39:ahc2:0:10:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 10 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x4 sg[0] - Addr 0x1f9a4e84 : Length 36 (probe41:ahc2:0:12:0): SCB 8: Immediate reset. Flags = 0x6040 (probe41:ahc2:0:12:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 9 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x4 sg[0] - Addr 0x1f9a4a84 : Length 36 (probe43:ahc2:0:14:0): SCB 8: Immediate reset. Flags = 0x6040 (probe43:ahc2:0:14:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 8 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x4 sg[0] - Addr 0x1f974284 : Length 36 (probe31:ahc2:0:1:0): SCB 8: Immediate reset. Flags = 0x6040 (probe31:ahc2:0:1:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 7 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x4 sg[0] - Addr 0x1f95ca84 : Length 36 (probe35:ahc2:0:5:0): SCB 8: Immediate reset. Flags = 0x6040 (probe35:ahc2:0:5:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 6 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x3 sg[0] - Addr 0x1f95c284 : Length 36 (probe39:ahc2:0:10:0): SCB 8: Immediate reset. Flags = 0x6040 (probe39:ahc2:0:10:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 5 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x4 sg[0] - Addr 0x1f9a4a84 : Length 36 (probe43:ahc2:0:14:0): SCB 8: Immediate reset. Flags = 0x6040 (probe43:ahc2:0:14:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 4 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x4 sg[0] - Addr 0x1f95ca84 : Length 36 (probe35:ahc2:0:5:0): SCB 8: Immediate reset. Flags = 0x6040 (probe35:ahc2:0:5:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 3 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x4 (probe43:ahc2:0:14:0): SCB 8: Immediate reset. Flags = 0x6040 (probe43:ahc2:0:14:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 2 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. SCB 0x8 - timed out while idle, SEQADDR == 0x3 sg[0] - Addr 0x1f9a4a84 : Length 36 (probe43:ahc2:0:14:0): SCB 8: Immediate reset. Flags = 0x6040 (probe43:ahc2:0:14:0): no longer in timeout, status = 34b ahc2: Issued Channel A Bus Reset. 1 SCBs aborted ahc2: Timedout SCB already complete. Interrupts may not be functioning. da4 at ahc1 bus 0 target 2 lun 0 da4: Fixed Direct Access SCSI-3 device da4: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da4: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da5 at ahc1 bus 0 target 3 lun 0 da5: Fixed Direct Access SCSI-3 device da5: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da5: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da6 at ahc3 bus 0 target 11 lun 0 da6: Fixed Direct Access SCSI-2 device da6: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da6: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) da7 at ahc3 bus 0 target 15 lun 0 da7: Fixed Direct Access SCSI-2 device da7: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da7: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) da3 at ahc1 bus 0 target 0 lun 0 da3: Fixed Direct Access SCSI-2 device da3: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da3: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) Mounting root from ufs:/dev/da0a da2 at ahc0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) da2: 2077MB (4254819 512 byte sectors: 255H 63S/T 264C) da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) da1: 2077MB (4254819 512 byte sectors: 255H 63S/T 264C) da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) da0: 4157MB (8515173 512 byte sectors: 255H 63S/T 530C) vinum: loaded vinum: reading configuration from /dev/da2d vinum: updating configuration from /dev/da1d vinum: updating configuration from /dev/da0s1d To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message