Date: Wed, 13 Dec 2006 12:41:50 +0100 From: Philippe Pegon <Philippe.Pegon@crc.u-strasbg.fr> To: Michael Bakker <admins-ml@wap3.net> Cc: freebsd-proliant@freebsd.org Subject: Re: Smart Array P400 with FreeBSD 6.1 Message-ID: <457FE6FE.1040500@crc.u-strasbg.fr> In-Reply-To: <457FDCF5.2040409@wap3.net> References: <457FDCF5.2040409@wap3.net>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------010706090902010304010804 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Michael Bakker wrote: > Hi, Hi, > I'm thinking about purchasing a DL320s thats coming with a Smart Array > P400 controller. According to the supported harwarelist its not listed > for 6.1 only for the upcoming 7.0 release. Is anyone successfully > running this controller on FreeBSD <=6.1? I've read about someone using > 5.3 with a P400 but as far as I understand he wasn't quite sure if > theres really a Smart Array P400 in that machine ;) it works with RELENG_6_2 : http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/ciss/ciss.c?rev=1.64.2.3&content-type=text/x-cvsweb-markup dmesg of a DL360 G5 attached -- Philippe Pegon --------------010706090902010304010804 Content-Type: text/plain; name="dmesg.boot" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.boot" Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RC1 #5: Wed Nov 29 21:14:15 CET 2006 toor@crc.u-strasbg.fr:/usr/obj/usr/src/sys/SMP-62 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5140 @ 2.33GHz (2333.43-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>,<b18>> AMD Features=0x20000000<LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 3489431552 (3327 MB) avail memory = 3414675456 (3256 MB) ACPI APIC Table: <HP 00000083> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 acpi0: <HP P58> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci9: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9 pci10: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci10 pci11: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 1.0 on pci10 pci14: <PCI bus> on pcib4 pcib5: <PCI-PCI bridge> at device 2.0 on pci10 pci15: <PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci9 pci16: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci6: <ACPI PCI bus> on pcib7 ciss0: <HP Smart Array P400i> port 0x4000-0x40ff mem 0xfde00000-0xfdefffff,0xfddf0000-0xfddf0fff irq 16 at device 0.0 on pci6 ciss0: [GIANT-LOCKED] pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci19: <ACPI PCI bus> on pcib8 pcib9: <PCI-PCI bridge> at device 5.0 on pci0 pci22: <PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci2: <ACPI PCI bus> on pcib10 pcib11: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib11 bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3 bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bce0: Ethernet address: 00:19:bb:21:11:0a pcib12: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci4: <ACPI PCI bus> on pcib12 pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib13 bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xfa000000-0xfbffffff irq 16 at device 0.0 on pci5 bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz miibus1: <MII bus> on bce1 brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bce1: Ethernet address: 00:19:bb:21:11:52 pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib14 pci1: <display, VGA> at device 3.0 (no driver attached) pci1: <base peripheral> at device 4.0 (no driver attached) pci1: <base peripheral> at device 4.2 (no driver attached) pci1: <serial bus, USB> at device 4.4 (no driver attached) pci1: <serial bus> at device 4.6 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xee000-0xeffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A Timecounters tick every 1.000 msec acd0: CDRW <DW-224E-R/C.AB> at ata0-master UDMA33 SMP: AP CPU #1 Launched! da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 34699MB (71065440 512 byte sectors: 255H 32S/T 8709C) Trying to mount root from ufs:/dev/da0s1a --------------010706090902010304010804--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?457FE6FE.1040500>