From owner-aic7xxx Thu Nov 19 19:10:17 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id TAA02092 for aic7xxx-outgoing; Thu, 19 Nov 1998 19:10:17 -0800 (PST) (envelope-from owner-aic7xxx@FreeBSD.ORG) Received: from milk.liquidnet.org (stn5.wavinc.com [208.246.255.46]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id TAA02086 for ; Thu, 19 Nov 1998 19:10:14 -0800 (PST) (envelope-from scsi@milk.liquidnet.org) Received: (from scsi@localhost) by milk.liquidnet.org (8.8.8/8.8.8/Debian/GNU) id VAA10578 for aic7xxx@freebsd.org; Thu, 19 Nov 1998 21:54:59 -0600 Date: Thu, 19 Nov 1998 21:54:59 -0600 From: Scsi listbot Message-Id: <199811200354.VAA10578@milk.liquidnet.org> To: aic7xxx@FreeBSD.ORG Subject: 2.1.128 Sender: owner-aic7xxx@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Ever Since I changed over to 2.1.128, my scsi just doesn't want to work all it will do is reset over and over when I try to mount the cdrom drives or use my scanner. I have the 2940u2w card, two cdroms on the 50pin internal connection, the scanner is on ultra2. /proc/scsi/scsi - Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: UMAX Model: Astra 610S Rev: V1.3 Type: Scanner ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: SONY Model: CD-R CDU926S Rev: 1.1g Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: PLEXTOR Model: CD-ROM PX-6XCS Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 /proc/scsi/aic7xxx/0 - Adaptec AIC7xxx driver version: 5.1.4/3.2.4 Compile Options: AIC7XXX_RESET_DELAY : 5 AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled Check below to see which devices use tagged queueing AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option) AIC7XXX_PROC_STATS : Enabled Adapter Configuration: SCSI Adapter: Adaptec AHA-294X Ultra2 SCSI host adapter Ultra2-LVD/SE Wide Controller PCI MMAPed I/O Base: 0xe8022000 Adapter SEEPROM Config: SEEPROM found and used. Adaptec SCSI BIOS: Enabled IRQ: 10 SCBs: Active 0, Max Active 2, Allocated 15, HW 32, Page 255 Interrupts: 115 BIOS Control Word: 0x18a6 Adapter Control Word: 0x1c5c Extended Translation: Enabled Disconnect Enable Flags: 0xffff Ultra Enable Flags: 0x0000 Tag Queue Enable Flags: 0x0000 Ordered Queue Tag Flags: 0x0000 Default Tag Queue Depth: 24 Tagged Queue By Device array for aic7xxx host instance 0: {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255} Actual queue depth per device for aic7xxx host instance 0: {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1} Statistics: /proc/pci - PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies VT 82C597 Apollo VP3 (rev 4). Medium devsel. Fast back-to-back capable. Master Capable. Latency=16. Prefetchable 32 bit memory at 0xe0000000 [0xe0000008]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies Unknown device (rev 0). Vendor id=1106. Device id=8598. Medium devsel. Master Capable. No bursts. Min Gnt=4. Bus 0, device 7, function 0: ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 65). Medium devsel. Master Capable. No bursts. Bus 0, device 7, function 1: IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6). Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. I/O at 0xe000 [0xe001]. Bus 0, device 7, function 2: USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 2). Medium devsel. IRQ b. Master Capable. Latency=64. I/O at 0xe400 [0xe401]. Bus 0, device 7, function 3: Host bridge: VIA Technologies VT 82C586B Apollo ACPI (rev 16). Medium devsel. Fast back-to-back capable. Host bridge: VIA Technologies VT 82C586B Apollo ACPI (rev 16). Medium devsel. Fast back-to-back capable. Bus 0, device 8, function 0: SCSI storage controller: Adaptec AHA-2940U2 (rev 0). Medium devsel. Fast back-to-back capable. BIST capable. IRQ a. Master Capable. Latency=64. Min Gnt=39.Max Lat=25. I/O at 0xe800 [0xe801]. Non-prefetchable 64 bit memory at 0xe8022000 [0xe8022004]. Bus 0, device 9, function 0: Multimedia video controller: Zoran ZR36120 (rev 2). Fast devsel. IRQ c. Master Capable. Latency=64. Min Gnt=2.Max Lat=16. Non-prefetchable 32 bit memory at 0xe8020000 [0xe8020000]. Bus 0, device 10, function 0: VGA compatible controller: Texas Instruments TVP4020 Permedia 2 (rev 1). Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. Min Gnt=192.Max Lat=192. Non-prefetchable 32 bit memory at 0xe8000000 [0xe8000000]. Non-prefetchable 32 bit memory at 0xe7000000 [0xe7000000]. Non-prefetchable 32 bit memory at 0xe7800000 [0xe7800000]. Bus 0, device 11, function 0: Ethernet controller: DEC DC21140 (rev 34). Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. Min Gnt=20.Max Lat=40. I/O at 0xec00 [0xec01]. Non-prefetchable 32 bit memory at 0xe8021000 [0xe8021000]. if anyone has any idea how to get this working please contact me at sexton@midsouth.rr.com Tanks, William Sexton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-aic7xxx" in the body of the message