Date: Thu, 29 Aug 1996 12:46:31 -0700 From: "Justin T. Gibbs" <gibbs@freefall.freebsd.org> To: "Frode Nordahl" <froden@bigblue.no> Cc: "scsi@FreeBSD.org" <scsi@FreeBSD.org> Subject: Re: Adaptec 2940 vs. Tandberg TDC 4220 Message-ID: <199608291946.MAA29872@freefall.freebsd.org> In-Reply-To: Your message of "Thu, 29 Aug 1996 18:59:07 BST." <199608291657.SAA13020@login.bigblue.no>
next in thread | previous in thread | raw e-mail | index | archive | help
>I have a problem with FreeBSD 2.1.0-STABLE, Adaptec 2940 and a Tandberg TDC 42 >20. > >When trying to use the tape drive, the system kernel comes up with error messa >ges (SCSI bus is reset, some >queue errors etc), and the system hangs and automaticly reboots. > >I have noticed that the messages referrs to SCSI ID 2 and not the SCSI ID that > the tape drive uses. > >When booting, the tape gets a density code of 0x0 wich normally not works for >any tape drive. Anyone have a >sollution to this problem? >--------------------------------- >Frode Nordahl <froden@bigblue.no> Does your tape drive allow disconnection? Do you have disconnection enabled in SCSI-Select? It sounds like the tape is attempting an operation that takes a long time to perform, but it is not releasing the bus. -- Justin T. Gibbs =========================================== FreeBSD: Turning PCs into workstations ===========================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199608291946.MAA29872>