Date: Sun, 30 Jan 2005 22:56:20 -0500 From: Louis LeBlanc <FreeBSD@keyslapper.net> To: FreeBSD Questions <freebsd-questions@FreeBSD.org> Subject: Re: Kernel panic after adding ehci & acpi Message-ID: <20050131035620.GB1178@keyslapper.net> In-Reply-To: <20050130213233.GA1448@keyslapper.net> References: <20050130213233.GA1448@keyslapper.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--WhfpMioaduB5tiZL Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On 01/30/05 04:32 PM, Louis LeBlanc sat at the `puter and typed: > This is wierd. I just rebuilt and installed a new kernel with a few > additions, including ehci and acpi, and the kernel seems to be > panicking on startup. In 5 years, I've never had a FreeBSD kernel > actually panic on me. >=20 > I already have the uhci and ohci devices in my kernel config, I added > the ehci in hopes of getting USB 2.0 support. That part seems to be > fine: > Tn 30 15:59:42 keyslapper kernel: ehci0: [GIANT-LOCKED] > Jan 30 15:59:42 keyslapper kernel: ehci_pci_attach: companion usb0 > Jan 30 15:59:42 keyslapper kernel: ehci_pci_attach: companion usb1 > Jan 30 15:59:42 keyslapper kernel: ehci_pci_attach: companion usb2 > Jan 30 15:59:42 keyslapper kernel: ehci_pci_attach: companion usb3 > Jan 30 15:59:42 keyslapper kernel: usb4: EHCI version 1.0 > Jan 30 15:59:42 keyslapper kernel: usb4: companion controllers, 2 ports e= ach: usb0 usb1 usb2 usb3 > Jan 30 15:59:42 keyslapper kernel: usb4: <EHCI (generic) USB 2.0 controll= er> on ehci0 > Jan 30 15:59:42 keyslapper kernel: usb4: USB revision 2.0 > Jan 30 15:59:42 keyslapper kernel: uhub4: Intel EHCI root hub, class 9/0,= rev 2.00/1.00, addr 1 > Jan 30 15:59:42 keyslapper kernel: uhub4: 8 ports with 8 removable, self = powered >=20 >=20 > The panic message is as follows (partially) > Fatal Trap 12: Page Fualt while in kernel mode > CPUID =3D 0; acpi id =3D 00 > Fault Firtual Address 0x20 > Fault code =3D Supervisor read, Page not present > instruction pointer 0x8:0xC0440AEA >=20 > etc. >=20 > I had to restart in safe mode, but I can't figure out where the > problem is. Any ideas? >=20 > I had hoped to use the acpi module to monitor system temperature, but > I suspect it is the cause of the problem. If so, I'd just as soon > remove it. I am aware that some of the acpi stuff is experimental, > so I'm wondering if anyone can confirm that this is the problem, or > can confirm that the CPU_ENABLE_TCC cpu options work on the Dell > Dimension 8300 (P4 3.0G w/HT). >=20 > My last boot showed some log data on the acpi0 device, but this safe > boot didn't. Should I just eliminate it and skip the CPU_ENABLE_TCC > option? I know I'm responding to my own post, but here's the update: It appears the problem is the ehci device for usb 2.0 support. I'm confused. I added this as specified in the handbook, and it implies pretty clearly that it won't conflict with the USB 1.0 drivers, but I'm getting constant panics. Once I removed the ehci device from the kernel, it works fine. I also noticed that the handbook said this was buggy code. Is there any idea when this will be stabilized? BTW, I'm running FreeBSD 5.3 RELEASE-p3; I neglected to mention that before. TIA Lou --=20 Louis LeBlanc FreeBSD-at-keyslapper-DOT-net Fully Funded Hobbyist, KeySlapper Extrordinaire :) Key fingerprint =3D C5E7 4762 F071 CE3B ED51 4FB8 AF85 A2FE 80C8 D9A2 idleness, n.: Leisure gone to seed. --WhfpMioaduB5tiZL Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (FreeBSD) iD8DBQFB/axkr4Wi/oDI2aIRAt72AJ0cjGCtsotCqF3poKKZenVZVUmgsQCfU4gt +fWnQk6Qc9w4EfQgo+KqAS8= =nUht -----END PGP SIGNATURE----- --WhfpMioaduB5tiZL--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050131035620.GB1178>