From owner-freebsd-current@FreeBSD.ORG Sun Aug 29 04:48:59 2004 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BF06116A4CE for ; Sun, 29 Aug 2004 04:48:59 +0000 (GMT) Received: from mail2.neureal.com (mail2.neureal.com [66.98.170.78]) by mx1.FreeBSD.org (Postfix) with SMTP id 52E9243D3F for ; Sun, 29 Aug 2004 04:48:59 +0000 (GMT) (envelope-from quaggamail@quaggaspace.org) Received: (qmail 979 invoked by uid 399); 29 Aug 2004 04:48:54 -0000 Received: from unknown (HELO ?192.168.42.25?) (68.162.100.90) by mail2.neureal.com with SMTP; 29 Aug 2004 04:48:54 -0000 From: Justin Settle To: freebsd-current@freebsd.org Content-Type: text/plain Message-Id: <1093754957.564.24.camel@amon.quaggaspace.org> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.6 Date: Sun, 29 Aug 2004 00:49:17 -0400 Content-Transfer-Encoding: 7bit Subject: APIC causes vr0 watchdog timeouts and Interrupt storms X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 29 Aug 2004 04:48:59 -0000 Hello, I recently installed 5.3-BETA. After booting, I found was unable to use my usb mouse or my ethernet (Via-rhine). I started tinkering with the kernel and found that if I disabled APIC, this system worked without ethernet issues or mouse isssues. After talking with some people they suggested I post boot -v, dmesg's of the different kernels so here they are: The first thing I tried was a GENERIC with SMP commented out. It had the same issues as GENERIC: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA2 #0: Sat Aug 28 23:18:57 EDT 2004 root@amon.quaggaspace.org:/usr/obj/usr/src/sys/GENERICNOSMP WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ad1000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ad121c. Table 'FACP' at 0x2fff3040 Table 'APIC' at 0x2fff6e00 MADT: Found table at 0x2fff6e00 MP Configuration Table version 1.4 found at 0xc00f1400 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193135 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1467296595 Hz CPU: AMD Athlon(tm) XP 1700+ (1467.30-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383fbff AMD Features=0xc0400000 Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 805240832 (767 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000002f23ffff, 778149888 bytes (189978 pages) avail memory = 778231808 (742 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb040 bios32: Entry = 0xfb4b0 (c00fb4b0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb4e0 pnpbios: Found PnP BIOS data at 0xc00fbfb0 pnpbios: Entry = f0000:bfe0 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> random: io: mem: Pentium Pro MTRR support enabled null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80008840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31891106) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00fdea0 PCI-Only Interrupts: 5 10 11 12 Location Bus Device Pin Link IRQs slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 6 0 13 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 6 0 13 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 6 0 13 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 6 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 7 0 19 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 7 0 19 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 7 0 19 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 7 0 19 D 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 17 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 17 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 16 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 16 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 16 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 16 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 18 A 0x01 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 unknown: not probed (disabled) cpu0: on acpi0 acpi_tz0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.16.0 \\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.16.1 \\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.16.2 \\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.16.3 \\_SB_.PCI0.ALKA irq 0: [20] 0+ low,level,sharable 0.17.0 \\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.17.1 \\_SB_.PCI0.ALKC irq 0: [22] 0+ low,level,sharable 0.17.2 \\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.17.3 \\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.18.0 \\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.18.1 \\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.18.2 \\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.18.3 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=0x1106, dev=0x3189, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb168, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d000, size 5, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB) pcib0: possible interrupts: 21 ACPI PCI link arbitrated settings: \\_SB_.PCI0.ALKB (references 5, priority 250): interrupts: 21 penalty: 50 \\_SB_.PCI0.ALKD (references 5, priority 250): interrupts: 23 penalty: 50 \\_SB_.PCI0.ALKA (references 1, priority 10): interrupts: 20 penalty: 10 \\_SB_.PCI0.ALKC (references 1, priority 10): interrupts: 22 penalty: 10 acpi link set: _CRS failed for link \\_SB_.PCI0.ALKB - AE_NULL_ENTRY acpi link set: curr irq 0 != 21 for \\_SB_.PCI0.ALKB (ignoring) unknown: _SRS failed, irq 21 via \\_SB_.PCI0.ALKB found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000d400, size 5, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB) pcib0: slot 16 INTB is already routed to irq 21 found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000d800, size 5, enabled pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.ALKB) pcib0: slot 16 INTC is already routed to irq 21 found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=2 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ee000000, size 8, enabled pcib0: matched entry for 0.16.INTD (src \\_SB_.PCI0.ALKB) pcib0: slot 16 INTD is already routed to irq 21 found-> vendor=0x1106, dev=0x3104, revid=0x82 bus=0, slot=16, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3177, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000dc00, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=17, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000e000, size 8, enabled pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.ALKC) pcib0: possible interrupts: 22 ACPI PCI link arbitrated settings: \\_SB_.PCI0.ALKD (references 5, priority 500): interrupts: 23 penalty: 100 \\_SB_.PCI0.ALKA (references 1, priority 20): interrupts: 20 penalty: 20 \\_SB_.PCI0.ALKC (references 1, priority 20): interrupts: 22 penalty: 20 acpi link set: _CRS failed for link \\_SB_.PCI0.ALKC - AE_NULL_ENTRY acpi link set: curr irq 0 != 22 for \\_SB_.PCI0.ALKC (ignoring) unknown: _SRS failed, irq 22 via \\_SB_.PCI0.ALKC found-> vendor=0x1106, dev=0x3059, revid=0x50 bus=0, slot=17, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e400, size 8, enabled map[14]: type 1, range 32, base ee001000, size 8, enabled pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.ALKD) pcib0: possible interrupts: 23 ACPI PCI link arbitrated settings: \\_SB_.PCI0.ALKD (references 5, priority 750): interrupts: 23 penalty: 150 \\_SB_.PCI0.ALKA (references 1, priority 30): interrupts: 20 penalty: 30 acpi link set: _CRS failed for link \\_SB_.PCI0.ALKD - AE_NULL_ENTRY acpi link set: curr irq 0 != 23 for \\_SB_.PCI0.ALKD (ignoring) unknown: _SRS failed, irq 23 via \\_SB_.PCI0.ALKD found-> vendor=0x1106, dev=0x3065, revid=0x74 bus=0, slot=18, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: mem 0xe8000000-0xebffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 240M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xec000000-0xedffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base ec000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xec000000-0xecffffff map[14]: type 3, range 32, base e0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 found-> vendor=0x10de, dev=0x0281, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) uhci0: port 0xd000-0xd01f irq 11 at device 16.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.00, addr 2, iclass 3/1 ums0: 4 buttons and Z dir. uhci1: port 0xd400-0xd41f irq 21 at device 16.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd800-0xd81f irq 21 at device 16.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 16.3 (no driver attached) isab0: at device 17.0 on pci0 isa0: on isab0 atapci0: port 0xdc00-0xdc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdc00 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc ata1: [MPSAFE] pci0: at device 17.5 (no driver attached) vr0: port 0xe400-0xe4ff mem 0xee001000-0xee0010ff irq 11 at device 18.0 on pci0 vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400 miibus0: on vr0 ukphy0: on miibus0 ukphy0: OUI 0x004063, model 0x0032, rev. 5 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: bpf attached vr0: Ethernet address: 00:50:8d:46:5a:1f vr0: [GIANT-LOCKED] fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 sio0: irq maps: 0xd001 0xd011 0xd001 0xd001 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0xd001 0xd009 0xd001 0xd001 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: on ppc0 ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: HP ENHANCED PCL5,PJL plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 13: ioport 0xdc00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1467296595 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on VIA 8235 chip ata0-master: setting UDMA100 on VIA 8235 chip ad0: ATA-6 disk at ata0-master ad0: 38146MB (78125000 sectors), 77504 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ATAPI_RESET time = 10us ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ATAPI_RESET time = 10us ata1-master: setting PIO4 on VIA 8235 chip ata1-master: setting UDMA33 on VIA 8235 chip ata1-slave: setting PIO4 on VIA 8235 chip ata1-slave: setting UDMA33 on VIA 8235 chip acd0: <_NEC DVD_RW ND-2510A/2.15> DVDR drive at ata1 as master acd0: read 6890KB/s (6890KB/s) write 5512KB/s (5512KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc acd1: CDRW drive at ata1 as slave acd1: 2048KB buffer, UDMA33 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd1: Writes: CDR, CDRW, test write, burnproof acd1: Audio: play, 255 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 11 (ISA IRQ 11) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:54524547 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 27916568064 end 27916600319 GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727 GEOM: Configure ad0s1b, start 134217728 length 1594351616 end 1728569343 GEOM: Configure ad0s1c, start 0 length 27916568064 end 27916568063 GEOM: Configure ad0s1d, start 14076600320 length 13839967744 end 27916568063 GEOM: Configure ad0s1e, start 1728569344 length 268435456 end 1997004799 GEOM: Configure ad0s1f, start 1997004800 length 268435456 end 2265440255 GEOM: Configure ad0s1g, start 2265440256 length 10737418240 end 13002858495 GEOM: Configure ad0s1h, start 13002858496 length 1073741824 end 14076600319 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init Interrupt storm detected on "irq21: uhci1 uhci2"; throttling interrupt source vr0: watchdog timeout usbd_setup_pipe: failed to start endpoint, TIMEOUT Linux ELF exec handler installed *************** As you can see, the interupt storm and vr0 timeouts at the end. USB mouse was unresponsive and vr0 timed out whenever I did anything. I then compiled without SMP or device APIC. This kernel seemingly works fine for me: *************** Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA2 #0: Sun Aug 29 00:02:49 EDT 2004 root@amon.quaggaspace.org:/usr/obj/usr/src/sys/GENERICNOAPIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0acb000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0acb21c. Calibrating clock(s) ... i8254 clock: 1193134 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1467292412 Hz CPU: AMD Athlon(tm) XP 1700+ (1467.29-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383fbff AMD Features=0xc0400000 Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 805240832 (767 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000002f23ffff, 778149888 bytes (189978 pages) avail memory = 778231808 (742 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb040 bios32: Entry = 0xfb4b0 (c00fb4b0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb4e0 pnpbios: Found PnP BIOS data at 0xc00fbfb0 pnpbios: Entry = f0000:bfe0 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> random: io: mem: Pentium Pro MTRR support enabled null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80008840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31891106) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00fdea0 PCI-Only Interrupts: 5 10 11 12 Location Bus Device Pin Link IRQs slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 6 0 13 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 6 0 13 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 6 0 13 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 6 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 7 0 19 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 7 0 19 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 7 0 19 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 7 0 19 D 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 17 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 17 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 16 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 16 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 16 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 16 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 18 A 0x01 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 unknown: not probed (disabled) cpu0: on acpi0 acpi_tz0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.8.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.8.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.8.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.8.3 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.9.0 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.9.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.9.2 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.9.3 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.10.0 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.10.1 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.10.2 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.10.3 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.11.0 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.11.1 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.11.2 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.11.3 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.12.0 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.12.1 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.12.2 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.12.3 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.13.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.13.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.13.2 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.13.3 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.19.0 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.19.1 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.19.2 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.19.3 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.16.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.16.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.16.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.16.3 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.17.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.17.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.17.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.17.3 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.1.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.1.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.1.3 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.18.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.18.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.18.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.18.3 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=0x1106, dev=0x3189, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb168, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d000, size 5, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKA) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKA (references 11, priority 229890): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 440 440 490 5440 5440 5440 5440 5440 50440 50440100440 \\_SB_.PCI0.LNKB (references 11, priority 229890): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 440 440 490 5440 5440 5440 5440 5440 50440 50440100440 \\_SB_.PCI0.LNKC (references 11, priority 229890): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 440 440 490 5440 5440 5440 5440 5440 50440 50440100440 \\_SB_.PCI0.LNKD (references 11, priority 229890): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 440 440 490 5440 5440 5440 5440 5440 50440 50440100440 pcib0: slot 16 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000d400, size 5, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LNKB) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKB (references 11, priority 234840): interrupts: 10 5 11 12 7 6 4 3 15 14 1 penalty: 880 930 990 5880 5880 5880 5880 5880 50880 50880100880 \\_SB_.PCI0.LNKC (references 11, priority 234840): interrupts: 10 5 11 12 7 6 4 3 15 14 1 penalty: 880 930 990 5880 5880 5880 5880 5880 50880 50880100880 \\_SB_.PCI0.LNKD (references 11, priority 234840): interrupts: 10 5 11 12 7 6 4 3 15 14 1 penalty: 880 930 990 5880 5880 5880 5880 5880 50880 50880100880 pcib0: slot 16 INTB routed to irq 5 via \\_SB_.PCI0.LNKB found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000d800, size 5, enabled pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.LNKC) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKC (references 11, priority 239790): interrupts: 10 11 5 12 7 6 4 3 15 14 1 penalty: 1320 1430 1480 6320 6320 6320 6320 6320 51320 51320101320 \\_SB_.PCI0.LNKD (references 11, priority 239790): interrupts: 10 11 5 12 7 6 4 3 15 14 1 penalty: 1320 1430 1480 6320 6320 6320 6320 6320 51320 51320101320 pcib0: slot 16 INTC routed to irq 10 via \\_SB_.PCI0.LNKC found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=2 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ee000000, size 8, enabled pcib0: matched entry for 0.16.INTD (src \\_SB_.PCI0.LNKD) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKD (references 11, priority 244740): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 1870 1870 1920 6760 6760 6760 6760 6760 51760 51760101760 pcib0: slot 16 INTD routed to irq 12 via \\_SB_.PCI0.LNKD found-> vendor=0x1106, dev=0x3104, revid=0x82 bus=0, slot=16, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3177, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000dc00, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=17, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000e000, size 8, enabled pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.LNKC) pcib0: slot 17 INTC is already routed to irq 10 found-> vendor=0x1106, dev=0x3059, revid=0x50 bus=0, slot=17, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e400, size 8, enabled map[14]: type 1, range 32, base ee001000, size 8, enabled pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.LNKA) pcib0: slot 18 INTA is already routed to irq 11 found-> vendor=0x1106, dev=0x3065, revid=0x74 bus=0, slot=18, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: mem 0xe8000000-0xebffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 240M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xec000000-0xedffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base ec000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xec000000-0xecffffff map[14]: type 3, range 32, base e0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA) pcib0: slot 1 INTA is already routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x10de, dev=0x0281, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) uhci0: port 0xd000-0xd01f irq 11 at device 16.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.00, addr 2, iclass 3/1 ums0: 4 buttons and Z dir. uhci1: port 0xd400-0xd41f irq 5 at device 16.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd800-0xd81f irq 10 at device 16.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 16.3 (no driver attached) isab0: at device 17.0 on pci0 isa0: on isab0 atapci0: port 0xdc00-0xdc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdc00 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc ata1: [MPSAFE] pci0: at device 17.5 (no driver attached) vr0: port 0xe400-0xe4ff mem 0xee001000-0xee0010ff irq 11 at device 18.0 on pci0 vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400 miibus0: on vr0 ukphy0: on miibus0 ukphy0: OUI 0x004063, model 0x0032, rev. 5 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: bpf attached vr0: Ethernet address: 00:50:8d:46:5a:1f vr0: [GIANT-LOCKED] fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: on ppc0 ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: HP ENHANCED PCL5,PJL plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 13: ioport 0xdc00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1467292412 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on VIA 8235 chip ata0-master: setting UDMA100 on VIA 8235 chip ad0: ATA-6 disk at ata0-master ad0: 38146MB (78125000 sectors), 77504 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ATAPI_RESET time = 10us ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ATAPI_RESET time = 20us ata1-master: setting PIO4 on VIA 8235 chip ata1-master: setting UDMA33 on VIA 8235 chip ata1-slave: setting PIO4 on VIA 8235 chip ata1-slave: setting UDMA33 on VIA 8235 chip acd0: <_NEC DVD_RW ND-2510A/2.15> DVDR drive at ata1 as master acd0: read 6890KB/s (6890KB/s) write 5512KB/s (5512KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc acd1: CDRW drive at ata1 as slave acd1: 2048KB buffer, UDMA33 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd1: Writes: CDR, CDRW, test write, burnproof acd1: Audio: play, 255 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:54524547 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 27916568064 end 27916600319 GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727 GEOM: Configure ad0s1b, start 134217728 length 1594351616 end 1728569343 GEOM: Configure ad0s1c, start 0 length 27916568064 end 27916568063 GEOM: Configure ad0s1d, start 14076600320 length 13839967744 end 27916568063 GEOM: Configure ad0s1e, start 1728569344 length 268435456 end 1997004799 GEOM: Configure ad0s1f, start 1997004800 length 268435456 end 2265440255 GEOM: Configure ad0s1g, start 2265440256 length 10737418240 end 13002858495 GEOM: Configure ad0s1h, start 13002858496 length 1073741824 end 14076600319 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init Linux ELF exec handler installed ACPI is on both of these kernels but I've tried both without and the results are the same. Should any other information be needed/wanted I'll be sure to reply. Thank you for your time. Jay Settle