Date: Thu, 28 Dec 2006 13:27:54 +0000 From: "Sergey Lyubka" <valenok@gmail.com> To: "John Baldwin" <jhb@freebsd.org> Cc: freebsd-hardware@freebsd.org Subject: Re: Dell Poweredge 1950, boot problem Message-ID: <72c3a9570612280527s5e586b52hf76bd52132d93235@mail.gmail.com> In-Reply-To: <200612271939.59771.jhb@freebsd.org> References: <72c3a9570612180904t6dba47das5ea0cbcc34cd2b4b@mail.gmail.com> <4586e047.0c5f3bc7.600b.ffff85e7SMTPIN_ADDED@mx.google.com> <72c3a9570612190702j55d98b48s64a471e0923c786b@mail.gmail.com> <200612271939.59771.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Right, here is the dmesg where hang did not happen (usually happens though): Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RC1 #0: Thu Nov 16 05:12:08 UTC 2006 root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2995.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf64 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 Logical CPUs per core: 2 real memory = 1073381376 (1023 MB) avail memory = 1041211392 (992 MB) ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic1: WARNING: intbase 64 != expected base 24 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 64-87 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci5: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci5 pci6: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci6 pci7: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci6 pci9: <ACPI PCI bus> on pcib4 pcib5: <PCI-PCI bridge> at device 0.3 on pci5 pci10: <PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib7 mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfddfc000-0xfddfffff,0xfdde0000-0xfddeffff irq 64 at device 8.0 on pci2 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.5.12.0 mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci11: <ACPI PCI bus> on pcib8 bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xfd8f0000-0xfd8fffff irq 16 at device 0.0 on pci11 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:10:18:19:68:ae pcib9: <PCI-PCI bridge> at device 5.0 on pci0 pci12: <PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci13: <ACPI PCI bus> on pcib10 pcib11: <PCI-PCI bridge> at device 7.0 on pci0 pci14: <PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib12 uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdf00000-0xfdf003ff irq 21 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered ukbd0: Dell Dell USB Keyboard, rev 1.10/3.01, addr 3, iclass 3/1 kbd2 at ukbd0 pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci15: <ACPI PCI bus> on pcib13 pci15: <display, VGA> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: configured irq 0 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 0 not in bitmap of probed irqs 0 sio0: port may not be enabled fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: configured irq 0 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 0 not in bitmap of probed irqs 0 sio0: port may not be enabled pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33 ses0 at mpt0 bus 0 target 8 lun 0 ses0: <DP BACKPLANE 1.00> Fixed Enclosure Services SCSI-5 device ses0: 300.000MB/s transfers ses0: SCSI-3 SES Device SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! da0 at mpt0 bus 0 target 0 lun 0 da0: <FUJITSU MAX3036RC D206> Fixed Direct Access SCSI-3 device da0: 300.000MB/s transfers, Tagged Queueing Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) Trying to mount root from ufs:/dev/da0s1a bge0: link state changed to UP This time `sysctl hw.ncpu` shows 4. This is because I have disabled CPU features (hardware prefetch, virtualization, logical processor, etc). If these features enabled, hw.ncpu is 8. The box is 2 x Xeon Dell 1950.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?72c3a9570612280527s5e586b52hf76bd52132d93235>