Date: Fri, 29 Aug 2003 17:55:07 +0200 From: "Markus Paluschek" <warex@vsh.pl> To: <freebsd-smp@freebsd.org> Subject: strange dmesg in compaq proliant 350 ML Message-ID: <001c01c36e45$ec15b430$5bc8cdc3@xxxifh6kxt8och>
next in thread | raw e-mail | index | archive | help
I am wondering whats this and how to fix it:
"unknown: I/O range not supported"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Wed Aug 27 15:20:40 CEST 2003
root@gw.vsh.pl:/usr/src/sys/i386/compile/CQ-5.1_c
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04c0000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.25-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1342152704 (1279 MB)
avail memory = 1299759104 (1239 MB)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Changing APIC ID for IO APIC #1 from 0 to 3 on chip
Changing APIC ID for IO APIC #2 from 0 to 4 on chip
Changing APIC ID for IO APIC #3 from 0 to 5 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
Programming 16 pins in IOAPIC #2
Programming 16 pins in IOAPIC #3
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
io2 (APIC): apic id: 4, version: 0x000f0011, at 0xfec02000
io3 (APIC): apic id: 5, version: 0x000f0011, at 0xfec03000
Pentium Pro MTRR support enabled
acpi0: <COMPAQ D14 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pcibios: BIOS version 2.10
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
unknown: I/O range not supported
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <mass storage, SCSI> at device 2.0 (no driver attached)
pci0: <mass storage, SCSI> at device 2.1 (no driver attached)
pci0: <display, VGA> at device 3.0 (no driver attached)
bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf5fe0000-0xf5feffff irq 5 at device 4.0 on pci0
bge0: Ethernet address: 00:0b:cd:4f:ae:f5
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
pci0: <base peripheral> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x2000-0x200f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib1
ciss0: <HP Smart Array 641> port 0x3000-0x30ff mem
0xf7f80000-0xf7fbffff,0xf7ff0000-0xf7ff1fff irq 15 at device 1.0 on pci2
pcib2: <ACPI Host-PCI bridge> on acpi0
pci5: <ACPI PCI bus> on pcib2
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem
0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
acd0: CDROM <HL-DT-ST CD-ROM GCR-8480B> at ata0-master PIO4
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/da0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001c01c36e45$ec15b430$5bc8cdc3>