Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 12 Aug 2002 21:37:16 +0200
From:      Wilko Bulte <wkb@freebie.xs4all.nl>
To:        Marcin Gryszkalis <mgryszkalis@cerint.pl>
Cc:        mjacob@feral.com, freebsd-alpha <freebsd-alpha@FreeBSD.ORG>, freebsd-scsi@FreeBSD.ORG
Subject:   Re: ISP Nvram [ was 'da driver problem?' ]
Message-ID:  <20020812213716.B2453@freebie.xs4all.nl>
In-Reply-To: <20020812212716.A2330@freebie.xs4all.nl>; from wkb@freebie.xs4all.nl on Mon, Aug 12, 2002 at 09:27:16PM %2B0200
References:  <Pine.BSF.4.21.0208121012280.73304-100000@beppo> <3D58071B.6070901@cerint.pl> <20020812212716.A2330@freebie.xs4all.nl>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Aug 12, 2002 at 09:27:16PM +0200, Wilko Bulte wrote:
> On Mon, Aug 12, 2002 at 09:06:03PM +0200, Marcin Gryszkalis wrote:
> > Matthew Jacob wrote:
> > > Interrupt the boot process and at the loader prompt do
> > > 	set isp_debug=0x1f
> > > and boot (or fail to boot) and send us the output.
> > > Or add
> > > 	set isp_no_nvram=0x1
> > > to keep NVRAM from being read.
> > 
> > I'll try... (I'll be able to do it on wednesday).
> > 
> > > You haven't said whether you're now loading isp firmware or not.
> > I loaded ispfw.ko (w/o any difference).
> > 
> > Preloaded elf kernel "kernel" at 0xfffffc0000600000.
> > Preloaded elf module "ispfw.ko" at 0xfffffc00006000c0.
> > ...
> > isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 
> > 0x82018000-0x82018fff irq 12 at device 9.0 on pci0
> > isp0: interrupting at CIA irq 12
> > isp0: invalid NVRAM header
> > da0 at isp0 bus 0 target 1 lun 0
> > da0: <DEC RZ29B    (C) DEC 0016> Fixed Direct Access SCSI-2 device
> > da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled
> 
> Martin, are these drives inside StorageWorks SBB containers? [I lost the
> beginning of this thread]. If yes, do you have a mix of RZ29B-VA and
> RZ29B-VW drives? 

FYI:

-VW are wide drives
-VA are narrow drives

-- 
|   / o / /_  _   				wilko@FreeBSD.org
|/|/ / / /(  (_)  Bulte				Arnhem, the Netherlands

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020812213716.B2453>