Date: Mon, 23 Feb 2004 22:03:15 +0800 From: Stephen Liu <satimis@icare.com.hk> To: freebsd-questions@freebsd.org Subject: Connecting ISP problem Message-ID: <403A0823.1020103@icare.com.hk>
next in thread | raw e-mail | index | archive | help
Hi folks
FreeBSD 5.2
new installation
2 NICs
Broadband Connection - to ISP via ADSL modem, running pppoe
# start pptp
command not found
# ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::250:fcff:fe61:f394%rl0 prefixlen 64 scopeid 0x1
inet 192.168.2.2 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:50:fc:61:f3:94
media: Ethernet autoselect (10baseT/UTP)
status: active
rl1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
ether 00:50:fc:6c:70:f7
media: Ethernet autoselect (10baseT/UTP)
status: no carrier
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
cat /etc/rc.conf
inetd_enable="YES"
keymap="us.pc-ctrl"
linux_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
ifconfig_rl0="DHCP"
ppp_enable="YES
ifconfig_rl0="DHCP"
ipv6_enable="YES"
hostname="icare.com.hk"
cat /etc/resolv.conf
search domain.com
nameserver 192.168.2.1
cat /etc/ppp/ppp.conf
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 180 # 3 minute idle timer (the default)
enable dns # request DNS info (for resolv.conf)
papchap:
set phone PHONE_NUM
set authname USERNAME
set authkey PASSWORD
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR # Add a (sticky) default route
Kindly advise how to make
# start pptp
to work
TIA
B.R.
Stephen Liu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?403A0823.1020103>