From owner-freebsd-wireless@FreeBSD.ORG Wed Feb 19 13:41:49 2014 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 5114EA5D for ; Wed, 19 Feb 2014 13:41:49 +0000 (UTC) Received: from graal.it-profi.org.ua (graal.shurik.kiev.ua [193.239.74.7]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 14C4E1835 for ; Wed, 19 Feb 2014 13:41:47 +0000 (UTC) Received: from [217.76.201.82] (helo=thinkpad.it-profi.org.ua) by graal.it-profi.org.ua with esmtpa (Exim 4.82 (FreeBSD)) (envelope-from ) id 1WG7P9-000Laj-I4 for freebsd-wireless@freebsd.org; Wed, 19 Feb 2014 15:41:39 +0200 Message-ID: <5304B48E.8070404@shurik.kiev.ua> Date: Wed, 19 Feb 2014 15:41:34 +0200 From: Alexandr User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:24.0) Gecko/20100101 Thunderbird/24.3.0 MIME-Version: 1.0 To: freebsd-wireless@freebsd.org Subject: Re: Problem connecting to AP References: <52CAB6F2.3010707@shurik.kiev.ua> <52CABD82.2070106@shurik.kiev.ua> <52CBFFD3.1080504@dat.pl> <52CE4E00.3060102@shurik.kiev.ua> <52CE4FBD.3060208@shurik.kiev.ua> In-Reply-To: <52CE4FBD.3060208@shurik.kiev.ua> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-SA-Exim-Connect-IP: 217.76.201.82 X-SA-Exim-Mail-From: shuriku@shurik.kiev.ua X-SA-Exim-Scanned: No (on graal.it-profi.org.ua); SAEximRunCond expanded to false X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Feb 2014 13:41:49 -0000 09.01.2014 09:29, Alexandr пишет: > By the way, it connects to my work Cisco and Linksys AP's (but only 11g) > without any problems... > > 09.01.2014 09:21, Alexandr пишет: >> No, wpa_passphrase didn't help me. >> >> 07.01.2014 15:23, Maciej Milewski пишет: >>> On 06.01.2014 15:28, Alexandr wrote: >>>> I simply changed key in this listing to "secret". Yes, I tried a very >>>> simple configuration, no luck: >>>> >>>> network={ >>>> ssid="door" >>>> psk="secret" >>>> } >>> Try using wpa_passphrase: >>> man wpa_passphrase. >>> It should create correct psk. >>> >>>> 06.01.2014 16:24, Adrian Chadd пишет: >>>>> The passphrase 'secret' is too short for WPA. >>>>> >>>>> I gather it's not _that_, but is it long enough to meet WPA reuirements? >>>>> >>>>> Have you tried removing the proto= and bssid lines? You don't strictly >>>>> need them. >>>>> >>>>> Thanks! >>>>> >>>>> -a >>>>> >>>>> >>>>> On 6 January 2014 06:00, Alexandr wrote: >>>>>> Hello, >>>>>> >>>>>> I recently upgraded system on my laptop to current with a hope to get my >>>>>> wireless card working. Now it successfully recognized by kernel: >>>>>> >>>>>> iwn0: mem 0xf2d00000-0xf2d01fff irq 17 >>>>>> at device 0.0 on pci3 >>>>>> >>>>>> Unfortunately, I can't connect to my home access point: >>>>>> >>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-DISCONNECTED >>>>>> bssid=54:e6:fc:e4:48:c4 reason=0 >>>>>> wpa_supplicant[519]: wlan0: WPA: 4-Way Handshake failed - pre-shared key >>>>>> may be incorrect >>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 >>>>>> ssid="door" auth_failures=10 duration=30 >>>>>> >>>>>> I tried different security settings (WPA-WPA2 + AES-TKIP), wireless >>>>>> modes, radio channels on my access point, the same error. >>>>>> >>>>>> # ifconfig wlan0 >>>>>> wlan0: flags=8843 metric 0 mtu 1500 >>>>>> ether 68:5d:43:92:3a:88 >>>>>> nd6 options=29 >>>>>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) >>>>>> status: no carrier >>>>>> ssid door channel 1 (2412 MHz 11g ht/40+) >>>>>> country US authmode WPA2/802.11i privacy ON deftxkey UNDEF >>>>>> txpower 13 >>>>>> bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 >>>>>> roam:rssi 7 roam:rate 64 protmode CTS ampdulimit 8k -amsdutx amsdurx >>>>>> shortgi wme roaming MANUAL >>>>>> >>>>>> /etc/wpa_supplicant.conf: >>>>>> >>>>>> ctrl_interface=/var/run/wpa_supplicant >>>>>> ctrl_interface_group=wheel >>>>>> eapol_version=2 >>>>>> >>>>>> network={ >>>>>> ssid="door" >>>>>> bssid=54:e6:fc:e4:48:c4 >>>>>> key_mgmt=WPA-PSK >>>>>> proto=WPA RSN >>>>>> psk="secret" >>>>>> } >>>>>> >>>>>> >>>>>> Other home devices connets to AP without problems. Can you point me how >>>>>> I can debug it? >>>>>> > Hello! Now I have changed my home access point to new Zyxel Keenetic Giga II and see the same picture - it still cannot connect to AP in 11n mode: Feb 19 15:33:05 thinkpad wpa_supplicant[518]: wlan0: CTRL-EVENT-SSID-REENABLED id=1 ssid="Keenetic-4703" Feb 19 15:33:05 thinkpad kernel: wlan0: [10:7b:ef:54:c5:c4] station assoc via MLME Feb 19 15:33:05 thinkpad kernel: wlan0: [10:7b:ef:54:c5:c4] switch station to HT40 channel 2462/0x40480 Feb 19 15:33:05 thinkpad wpa_supplicant[518]: wlan0: Trying to associate with 10:7b:ef:54:c5:c4 (SSID='Keenetic-4703' freq=2462 MHz) Feb 19 15:33:05 thinkpad kernel: wlan0: [10:7b:ef:54:c5:c4] recv auth frame with algorithm 0 seq 2 Feb 19 15:33:05 thinkpad kernel: wlan0: [10:7b:ef:54:c5:c4] assoc success at aid 1: long preamble, short slot time, QoS, HT40 (+AMPDU) Feb 19 15:33:05 thinkpad kernel: wlan0: link state changed to UP Feb 19 15:33:05 thinkpad wpa_supplicant[518]: wlan0: Associated with 10:7b:ef:54:c5:c4 Feb 19 15:33:05 thinkpad dhclient[2628]: send_packet: No buffer space available Feb 19 15:33:11 thinkpad last message repeated 2 times Feb 19 15:33:11 thinkpad kernel: wlan0: [10:7b:ef:54:c5:c4] recv deauthenticate (reason 15) Feb 19 15:33:11 thinkpad kernel: wlan0: link state changed to DOWN Feb 19 15:33:11 thinkpad wpa_supplicant[518]: wlan0: CTRL-EVENT-DISCONNECTED bssid=10:7b:ef:54:c5:c4 reason=0 Feb 19 15:33:11 thinkpad wpa_supplicant[518]: wlan0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect Feb 19 15:33:11 thinkpad wpa_supplicant[518]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=1 ssid="Keenetic-4703" auth_failures=13 duration=60 Is any way to restrict wlan0 to operate only in ht20? ifconfig wlan0 channel 11:ht/20 didn't help P.S. If I simply switch AP to 11g-mode my laptop connects to it.