Date: Sat, 20 Mar 1999 16:46:16 +0000 From: Bob Bishop <rb@gid.co.uk> To: stable@freebsd.org Subject: GENERIC kernel won't boot Message-ID: <l03020904b3197e16da4a@[194.32.164.2]>
next in thread | raw e-mail | index | archive | help
Hi,
Apologies if this has been done already, I only just started reading -stable.
This one has me puzzled. A GENERIC kernel built from -STABLE as of just
after midnight GMT 18 Mar 99 won't boot here; it does the following:
Booting [kernel]...
/kernel text=0x1b663a data=0x1cebc+0x20120 syms=[0x4+0x257f0+0x4+0x25bf4]
int=00000006 err=00000000 efl=00010046 eip=00118cc8
eax=00102800 ebx=0002fafc ecx=00000004 edx=00026310
esi=0002f469 edi=0033fa05 ebp=00094e78 esp=0009ee40
cs=0008 ds=0010 es=0010 fs=0010 gs=0010 ss=0010
cs:eip=c6 25 08 28 26 25 08 28-80 35 0a 28 f6 25 08 28
ss:esp=ee 94 00 00 00 00 00 80--4 00 20 a0 00 00 00 00
System halted
A custom kernel from the same sources works just fine; dmesg (from the
working kernel, obviously) follows. Any ideas anyone?
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-STABLE #1: Sat Mar 20 12:56:37 GMT 1999
rb@hal.gid.co.uk:/source/STABLE/src/sys/compile/HAL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 166194048 Hz
CPU: Cyrix 6x86MX (166.19-MHz 686-class CPU)
Origin = "CyrixInstead" Id = 0x600 Stepping=0 DIR=0x0452
Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX>
real memory = 33554432 (32768K bytes)
avail memory = 30146560 (29440K bytes)
Preloaded elf kernel "kernel" at 0xf02a3000.
Probing for devices on PCI bus 0:
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
ed1: <NE2000 PCI Ethernet (ProLAN)> rev 0x0b int a irq 9 on pci0.9.0
ed1: address 00:20:18:80:b8:cb, type NE2000 (16 bit)
vga0: <S3 Trio graphics accelerator> rev 0x53 int a irq 12 on pci0.10.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0: AHA-1542CF FW Rev. B.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
changing root device to da0s1a
da0 at aha0 bus 0 target 2 lun 0
da0: <DEC DSP5200S T392> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers
da0: 1908MB (3907911 512 byte sectors: 64H 32S/T 1908C)
da1 at aha0 bus 0 target 4 lun 0
da1: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device
da1: 3.300MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
--
Bob Bishop (0118) 977 4017 international code +44 118
rb@gid.co.uk fax (0118) 989 4254 between 0800 and 1800 UK
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?l03020904b3197e16da4a>