Date: Fri, 24 Dec 1999 01:27:23 -0500 (EST) From: m <kamidesu@hotpop.com> To: freebsd-questions@freebsd.org Subject: cant dial (PPP) Message-ID: <19991224062723.390C3639D1@zagnut.hotpop.com>
next in thread | raw e-mail | index | archive | help
I start ppp (version 2) and type "dial". ppp returns "warning: chat script failed". I type "q" and quit. What's wrong? I read the handbook, man ppp, and this is all the info I thought relevant: This is DMESG output: Probing for PnP devices: CSN 1 Vendor ID: CMI0001 [0x0100a90d] Serial 0x01000100 Comp ID: @@@0000 [0x00000000] CSN 2 Vendor ID: DAV0001 [0x01003610] Serial 0x00000907 Comp ID: @@@0000 [0x00000000] [...] sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A (Davicom 33600 internal modem) Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s2a IP packet filtering initialized, divert disabled, rule-based forwarding disabled, logging disabled My ppp.log is: Dec 24 01:58:56 kamisama ppp[273]: Phase: Using interface: tun0 Dec 24 01:58:56 kamisama ppp[273]: Phase: deflink: Created in closed state Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: set speed 115200 Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: set timeout 200 Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: add default HISADDR Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: enable dns Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: disable pred1 Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: deny pred1 Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: disable lqr Dec 24 01:58:56 kamisama ppp[273]: tun0: Command: default: deny lqr Dec 24 01:58:56 kamisama ppp[273]: tun0: Phase: PPP Started (interactive mode). Dec 24 01:58:58 kamisama ppp[273]: tun0: Command: /dev/tty: dial Dec 24 01:58:58 kamisama ppp[273]: tun0: Phase: bundle: Establish Dec 24 01:58:58 kamisama ppp[273]: tun0: Phase: deflink: closed -> opening Dec 24 01:58:58 kamisama ppp[273]: tun0: Phase: deflink: Connected! Dec 24 01:58:58 kamisama ppp[273]: tun0: Phase: deflink: opening -> dial Dec 24 01:58:58 kamisama ppp[273]: tun0: Chat: deflink: Dial attempt 1 of 1 Dec 24 01:58:58 kamisama ppp[273]: tun0: Chat: Send: AT^M Dec 24 01:58:58 kamisama ppp[273]: tun0: Chat: Expect(5): OK Dec 24 01:59:03 kamisama ppp[273]: tun0: Chat: Expect timeout Dec 24 01:59:03 kamisama ppp[273]: tun0: Chat: Send: AT^M Dec 24 01:59:03 kamisama ppp[273]: tun0: Chat: Expect(5): OK Dec 24 01:59:08 kamisama ppp[273]: tun0: Chat: Expect timeout (probably this? but the timeout is 200 seconds, and this happens in way less than 200 seconds ... ) Dec 24 01:59:08 kamisama ppp[273]: tun0: Phase: deflink: dial -> hangup Dec 24 01:59:08 kamisama ppp[273]: tun0: Phase: deflink: Disconnected! Dec 24 01:59:08 kamisama ppp[273]: tun0: Phase: deflink: Connect time: 10 secs: 0 octets in, 0 octets out Dec 24 01:59:08 kamisama ppp[273]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Fri Dec 24 01:59:08 1999 Dec 24 01:59:08 kamisama ppp[273]: tun0: Phase: deflink: hangup -> closed Dec 24 01:59:08 kamisama ppp[273]: tun0: Phase: bundle: Dead Dec 24 01:59:31 kamisama ppp[273]: tun0: Command: /dev/tty: q Dec 24 01:59:31 kamisama ppp[273]: tun0: Phase: PPP Terminated (normal). This is my ppp.conf: default: set device /dev/cuaa1 set log Phase Chat LCP IPCP CCP tun command set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" set timeout 200 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns disable pred1 deny pred1 disable lqr deny lqr papchap: set phone phone-number|another-phone-number set authname my-login set authkey my-psswd set openmode active accept chap # Thanks.Bye. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991224062723.390C3639D1>