Date: Fri, 9 Oct 2020 14:50:16 +0200 From: Klaus Cucinauomo <maciphone2@googlemail.com> To: Mark Millard <marklmi@yahoo.com>, freebsd-arm@freebsd.org, Kyle Evans <kevans@freebsd.org> Subject: Re: RPi4B: emmc2bus dma-range handling does not track the boot-time-FDT (u-boot based booting) Message-ID: <CCEEC0AD-B874-4753-AAA1-B3B5B302A30C@googlemail.com> In-Reply-To: <B3133D77-FA24-4F42-B529-D0B56F48E790@yahoo.com> References: <D8BDF95A-D6A8-4E95-A0CE-D53068E8355B.ref@yahoo.com> <D8BDF95A-D6A8-4E95-A0CE-D53068E8355B@yahoo.com> <ABE16EA6-49F1-461F-9B8A-6DAA7ED6A18D@googlemail.com> <98BC985D-EAAB-4AFB-AA8F-7391A45C4EBF@yahoo.com> <91324D35-B66A-4674-AE37-45F3DDB736FD@yahoo.com> <2B3F0409-88F2-4EBD-9C39-37929F973C77@yahoo.com> <B3133D77-FA24-4F42-B529-D0B56F48E790@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> Am 09.10.2020 um 12:02 schrieb Mark Millard <marklmi@yahoo.com>:
>=20
>=20
>=20
> On 2020-Oct-8, at 23:01, Mark Millard <marklmi at yahoo.com> wrote:
>=20
>> On 2020-Oct-8, at 21:29, Mark Millard <marklmi at yahoo.com> wrote:
>>=20
>>> On 2020-Oct-8, at 20:06, Mark Millard <marklmi at yahoo.com> wrote:
>>>=20
>>>> On 2020-Oct-8, at 06:27, Klaus Cucinauomo <maciphone2 at =
googlemail.com> wrote:
>>>>=20
>>>>>> Am 08.10.2020 um 11:01 schrieb Mark Millard via freebsd-arm =
<freebsd-arm@freebsd.org>:
>>>>>>=20
>=20
> Having reverted back to u-boot 2020.10 without
> compatibility list adjustments and with xhci-pci
> in place again, trying a 4 GiByte RPi4 without a
> microsd card boots as far as the rainbow square
> on the monitor but hangs there, never displaying
> even the:
>=20
> U-Boot 2020.10 (Oct 09 2020 - 06:50:04 +0000)
>=20
>=20
>=20
the following `dmesg` of the 4GB is with the copied-over whole =
msdos-partition of the Original RPI-ubuntu-distribution
/ubuntu DOESN`T use the latest fw-files from rpi-github(which also fail =
with me to the hdmi-rainbow-screen),
Copying over =E2=80=9Eour=E2=80=9C old bcm2711-rpi-4-b.dtb, booted a bit =
more (until gpio or so afaik)=E2=80=A6.it`s all about DeviceTree=20
and I guess Kyle Evans & friends unfortunately will have more =
adjustment-work in the brcm285..dtsi=E2=80=A6 for 2020.10
I unfortunately totally fail in my time-management but will tell more =
about the 8GB - VL805-videoCore-firmware-thing when finding time..=20
I didn=E2=80=99t yet apply kevans-patches, will test them it later..
Directly from SSD(no SD-card inserted):
=E2=80=94-config.txt : =E2=80=94
arm_control=3D0x200
dtparam=3Daudio=3Don,i2c_arm=3Don,spi=3Don
enable_uart=3D1
uart_2ndstage=3D1
dtoverlay=3Dminiuart-bt
dtoverlay=3Dmmc
dtoverlay=3Dpwm
device_tree_address=3D0x4000
kernel=3Du-boot.bin
=E2=80=94--------------------------------------------------
recover4.elf not found (6)
recovery.elf not found (6)
HUB [03:01] 2.00 000003:01 init port 1 speed 3
DEV [05:03] 2.00 000013:01 class 9 VID 045b PID 0209
HUB init [05:03] 2.00 000013:01
Read start4.elf bytes 2272992 hnd 0x000002e7 hash '319662b44a4c80d5'
Read fixup4.dat bytes 5405 hnd 0x000001bf hash '0c1a6c6f96114a3f'
0x00c03111 0x00000000 0x0000001f
MEM GPU: 76 ARM: 947 TOTAL: 1023
Starting start4.elf @ 0xfeb00200 partition 0
U-Boot 2020.10-rc5 (Oct 05 2020 - 03:08:23 +0000)
DRAM: 3.9 GiB
RPI 4 Model B (0xc03111)
MMC: mmc@7e300000: 1, emmc2@7e340000: 0
Loading Environment from FAT... In: serial
Out: vidconsole
Err: vidconsole
Net: eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 8 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Hit any key to stop autoboot: 0=20
Card did not respond to voltage select!
Device 0: Vendor: JMicron Rev: 3202 Prod: Tech =20
Type: Hard Disk
Capacity: 114473.4 MB =3D 111.7 GB (234441648 x 512)
... is now current device
Scanning usb 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk mmc@7e300000.blk...
Disk mmc@7e300000.blk not ready
Card did not respond to voltage select!
Scanning disk emmc2@7e340000.blk...
Disk emmc2@7e340000.blk not ready
Scanning disk usb_mass_storage.lun0...
** Unrecognized filesystem type **
Found 3 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
688192 bytes read in 6 ms (109.4 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Booting /efi\boot\bootaa64.efi
Consoles: EFI console =20
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Jun 11 07:40:35 UTC 2020 root@releng1.nyi.freebsd.org)
Command line arguments: loader.efi
Image base: 0x39d83000
EFI version: 2.80
EFI Firmware: Das U-Boot (rev 8224.4096)
Console: comconsole (0)
Load Path: /efi\boot\bootaa64.efi
Load Device: =
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)=
/UsbClass(0x152d,0x578,0x0,0x0,0x0)/HD(1,0x01,0,0x81f,0x18fa8)
Trying ESP: =
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)=
/UsbClass(0x152d,0x578,0x0,0x0,0x0)/HD(1,0x01,0,0x81f,0x18fa8)
Setting currdev to disk0p1:
Trying: =
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x0,0x0,0x9,0x0,0x3)=
/UsbClass(0x152d,0x578,0x0,0x0,0x0)/HD(2,0x01,0,0x197c7,0x76da839)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel text=3D0x2a8 text=3D0x7a7060 text=3D0x1b0d9c =
data=3D0x194600 data=3D0x0+0x302da6 syms=3D[0x8+0x178ba8+0x8+0x156776]
Loading configured modules...
/boot/kernel/umodem.ko text=3D0x1be0 text=3D0xfb0 data=3D0x618+0x8 =
syms=3D[0x8+0xe40+0x8+0xa8c]
/etc/hostid size=3D0x25
/boot/entropy size=3D0x1000
Hit [Enter] to boot immediately, or any other key for command prompt.
Type '?' for a list of commands, 'help' for more detailed help.
OK boot
Using DTB provided by EFI at 0x7ef1000.
EFI framebuffer information:
addr, size 0x3e3dc000, 0x6d8c00
dimensions 1824 x 984
stride 1824
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #39 a1d832e8c08-c271678(master): Fri Jul 17 =
04:56:52 UTC 2020
root@generic:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG =
arm64
FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git =
llvmorg-11.0.0-rc2-0-g414f32a9e86)
VT(efifb): resolution 1824x984
module firmware already present!
KLD file umodem.ko is missing dependencies
real memory =3D 4146876416 (3954 MB)
avail memory =3D 4023062528 (3836 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 39e34000 mode 2 pages 1
MAP 39e38000 mode 2 pages 3
MAP 39e3c000 mode 2 pages 4
MAP 3b250000 mode 2 pages 16
MAP fe100000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD =
13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before =
FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
clk_fixed2: <Fixed clock> on ofwbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
simplebus3: <Flattened device tree simple bus> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem =
0x7d5d2000-0x7d5d2eff on simplebus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem =
0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x400460=
00-0x40047fff irq 31 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq =
15,16 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 14 on =
simplebus0
bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
gpiobus1: <GPIO bus> on gpio1
gpioregulator0: <GPIO controlled regulator> on ofwbus0
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 17 on =
simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 19 on =
simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
uart1: <BCM2835 Mini-UART> mem 0x7e215040-0x7e21507f irq 22 on =
simplebus0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 27 =
on simplebus0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq =
32,33,34,35,36,37,38,39,40,41,42 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem =
0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on =
simplebus0
gpioc1: <GPIO controller> on gpio1
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff =
irq 63 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD =
13.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 1824x984(1824x984@0,0) 32bpp
fb0: fbswap: 1, pitch 7296, base 0x3e3dc000, screen_size 7237632
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
pcib0: <BCM2838-compatible PCI-express controller> mem =
0x7d500000-0x7d50930f irq 69,70 on simplebus1
pcib0: hardware identifies as revision 0x304.
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 81 at device 0.0 on pci0
pci1: <PCI bus> on pcib1
bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 82 at =
device 0.0 on pci1
bcm_xhci0: 32 bytes context size, 64-bit DMA
usbus0 on bcm_xhci0
genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 71,72 on =
simplebus1
genet0: GENET version 5.0 phy 0x0000
miibus0: <MII bus> on genet0
brgphy0: <BCM54213PE 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
genet0: Ethernet address: dc:a6:32:21:e9:57
gpioled0: <GPIO LEDs> on ofwbus0
sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff =
irq 80 on simplebus3
mmc1: <MMC/SD bus> on sdhci_bcm1
=E2=80=94- hanging here=E2=80=94
just GUESSING ;-) (absolutely NO proof:-):
It comes to boot problems short before xhci will be initialized from the =
DeviceTree
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CCEEC0AD-B874-4753-AAA1-B3B5B302A30C>