Date: Thu, 08 Oct 2009 13:40:14 +0400 From: Pavel Gubin <pg@2lazy.ru> To: freebsd-usb@freebsd.org Subject: Re: sb600/sb700 ohci experimental patch Message-ID: <hakc1u$gm6$1@ger.gmane.org> In-Reply-To: <4ABA36B1.9070706@icyb.net.ua> References: <4ABA36B1.9070706@icyb.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Andriy Gapon пишет: > If you have a system with SB600, SB700, etc chipset and you have problems with low > speed USB devices attached during boot (keyboard, mouse), could you please try the > following experimental patch and report back? > I am primarily interested in the first several lines produced during boot with > printfs that are introduced by the patch. Preferably in the context of surrounding > USB-related dmesg messages. No need to report subsequent same-looking > ever-repeating messages (if any). The problem was when the Prolific-based (uplcom driver) SonyEricsson USB2COM cable was connected during reboot, it was not properly recognized. This path fixes the issue. mb: Gigabyte GA-MA69VM-S2 FreeBSD 8.0-RC1 #0: Mon Oct 5 04:30:50 MSD 2009 [...] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2305.24-MHz 686-class CPU) [...] ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 [... almost the same for ohci[1-4] ...] usbus0: 12Mbps Full Speed USB v1.0 (hw power) control head <= 0x162f880 (hw power) control head => 0x162f880 usbus1: 12Mbps Full Speed USB v1.0 (hw power) control head <= 0x1658a80 (hw power) control head => 0x1658a80 usbus2: 12Mbps Full Speed USB v1.0 (hw power) control head <= 0x77ef1c90 (hw power) control head => 0x165c400 usbus3: 12Mbps Full Speed USB v1.0 (hw power) control head <= 0x165dd80 (hw power) control head => 0x165dd80 usbus4: 12Mbps Full Speed USB v1.0 (hw power) control head <= 0x1661900 (hw power) control head => 0x1661900 [...] (hw power) control head <= 0x165c400 (hw power) control head => 0x165c400 ugen2.2: <Prolific Technology Inc.> at usbus2 (hw power) control head <= 0x165c400 (hw power) control head => 0x165c400 (hw power) control head <= 0x165c400 (hw power) control head => 0x165c400 re0: link state changed to UP (hw power) control head <= 0x165c400 (hw power) control head => 0x165c400 -- Pavel Gubin Jabber: xmpp:pg@2lazy.ru / Phone +79218959055 / sip:pg@2lazy.ru
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?hakc1u$gm6$1>