Date: Thu, 16 Jul 2015 16:39:20 +0900 From: Ganbold Tsagaankhuu <ganbold@gmail.com> To: "freebsd-arm@freebsd.org" <arm@freebsd.org> Subject: Re: SDHC errors during boot on RPi2 (11.0-CURRENT) Message-ID: <CAGtf9xNdQbi7vgHK0271y5YKDQp_JyGTpjL-6ty_-1Jep_jYXg@mail.gmail.com> In-Reply-To: <1B7FD2F7-60D4-44AD-A2EA-5AA1159BAB4B@fh-muenster.de> References: <55A5A3F4.7040105@foxvalley.net> <D7A88FAC-C4C0-46DB-91F6-9AF51CD142B7@bsdimp.com> <1B7FD2F7-60D4-44AD-A2EA-5AA1159BAB4B@fh-muenster.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jul 16, 2015 at 4:33 PM, Michael Tuexen <tuexen@fh-muenster.de> wrote: > > On 16 Jul 2015, at 05:17, Warner Losh <imp@bsdimp.com> wrote: > > > > > >> On Jul 14, 2015, at 6:06 PM, Dan Raymond <draymond@foxvalley.net> > wrote: > >> > >> Is anyone else getting these errors during every boot? I'm running > r285346. > > > > I=E2=80=99ve been running on the RPi2 for some time and have never seen= this. I > haven=E2=80=99t > > rebuild in the past few weeks though. > > > > Does this happen on either SD cards? Or other versions of the kernel? > I'm observing this for quite a while, reproducible exactly once during > every boot on a RPI2. > Here is the what I see: > > > uname -a > FreeBSD rpi2 11.0-CURRENT FreeBSD 11.0-CURRENT #28 r285595M: Wed Jul 15 > 11:26:48 CEST 2015 tuexen@rpi2:/usr/home/tuexen/head/sys/arm/compile/= RPI2 > arm > I see similar messages on: FreeBSD rpi2 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r284969: Wed Jul 1 07:15:58 UTC 2015 root@releng2.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/RPI2 arm sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x0000071b sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Max curr: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x0000071b sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Max curr: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x0000071b sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Max curr: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x0000071b sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Max curr: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D uhub0: 1 port with 1 removable, self powered mmc0: CMD7 failed, RESULT: 1 mmcsd0: 32GB <SDHC SU32G 8.0 SN 05AF2FB1 MFG 02/2013 by 3 SD> at mmc0 41.6MHz/4bit/65535-block Ganbold > > dmesg > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2015 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 11.0-CURRENT #28 r285595M: Wed Jul 15 11:26:48 CEST 2015 > tuexen@rpi2:/usr/home/tuexen/head/sys/arm/compile/RPI2 arm > FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225 > VT: init without driver. > sema_sysinit > CPU: Cortex A7 rev 5 (Cortex-A core) > Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext > WB disabled EABT branch prediction enabled > LoUU:2 LoC:3 LoUIS:2 > Cache level 1: > 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc > 32KB/32B 2-way instruction cache Read-Alloc > Cache level 2: > 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc > real memory =3D 989851648 (943 MB) > avail memory =3D 958423040 (914 MB) > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > random: entropy device external interface > kbd0 at kbdmux0 > ofwbus0: <Open Firmware Device Tree> > simplebus0: <Flattened device tree simple bus> mem 0x3f000000-0x3fffffff > on ofwbus0 > bcm28360: <Broadcom bcm2836> > generic_timer0: <ARMv7 Generic Timer> irq 72,73,75,74 on ofwbus0 > Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 > Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 > intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0 > bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0 > gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq > 57,59,58,60 on simplebus0 > gpio0: read-only pins: 46,48-53. > gpio0: reserved pins: 48-53. > gpiobus0: <OFW GPIO bus> on gpio0 > gpioled0: <GPIO led> at pin(s) 35 on gpiobus0 > gpioled1: <GPIO led> at pin(s) 47 on gpiobus0 > gpioc0: <GPIO controller> on gpio0 > iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on > simplebus0 > iicbus0: <OFW I2C bus> on iichb0 > iic0: <I2C generic I/O> on iicbus0 > iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on > simplebus0 > iicbus1: <OFW I2C bus> on iichb1 > iic1: <I2C generic I/O> on iicbus1 > spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on > simplebus0 > spibus0: <OFW SPI bus> on spi0 > bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff ir= q > 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0 > mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0 > sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70 > on simplebus0 > mmc0: <MMC/SD bus> on sdhci_bcm0 > uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus= 0 > uart0: console (115200,n,8,1) > vchiq0: <BCM2835 VCHIQ> mem 0xb800-0xb84f irq 2 on simplebus0 > vchiq0: [GIANT-LOCKED] > vchiq: local ver 6 (min 3), remote ver 6. > pcm0: <VCHQI audio> on vchiq0 > bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem > 0x980000-0x99ffff irq 17 on simplebus0 > usbus0 on bcm283x_dwcotg0 > cpulist0: <Open Firmware CPU Group> on ofwbus0 > cpu0: <Open Firmware CPU> on cpulist0 > bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 > cpu1: <Open Firmware CPU> on cpulist0 > cpu2: <Open Firmware CPU> on cpulist0 > cpu3: <Open Firmware CPU> on cpulist0 > fb0: <BCM2835 VT framebuffer driver> on ofwbus0 > fbd0 on fb0 > VT: initialize with new VT driver "fb". > fb0: 656x416(656x416@0,0) 24bpp > fb0: fbswap: 1, pitch 1968, base 0x3daac000, screen_size 818688 > cryptosoft0: <software crypto> > Timecounters tick every 10.000 msec > IPsec: Initialized Security Association Processing. > usbus0: 480Mbps High Speed USB v2.0 > ugen0.1: <DWCOTG> at usbus0 > uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active > command. > sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000001 > sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x0000071b > sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 > sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 > sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 > sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb > sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 > sdhci_bcm0-slot0: Caps: 0x00000000 | Max curr: 0x00000001 > sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active > command. > sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000001 > sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x0000071b > sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 > sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 > sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 > sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb > sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 > sdhci_bcm0-slot0: Caps: 0x00000000 | Max curr: 0x00000001 > sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active > command. > sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000001 > sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x0000071b > sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 > sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 > sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 > sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb > sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 > sdhci_bcm0-slot0: Caps: 0x00000000 | Max curr: 0x00000001 > sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm0-slot0: Got data interrupt 0x00000002, but there is no active > command. > sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000001 > sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x0000071b > sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 > sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 > sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 > sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb > sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 > sdhci_bcm0-slot0: Caps: 0x00000000 | Max curr: 0x00000001 > sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > uhub0: 1 port with 1 removable, self powered > mmc0: CMD7 failed, RESULT: 1 > mmcsd0: 32GB <SDHC SL32G 8.0 SN 03A82991 MFG 12/2014 by 3 SD> at mmc0 > 41.6MHz/4bit/65535-block > bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF > Release APs > Root mount waiting for: usbus0 > ugen0.2: <vendor 0x0424> at usbus0 > uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> o= n > usbus0 > uhub1: MTT enabled > Root mount waiting for: usbus0 > uhub1: 5 ports with 4 removable, self powered > Root mount waiting for: usbus0 > ugen0.3: <vendor 0x0424> at usbus0 > smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0 > Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]... > warning: no time-of-day clock registered, system time will not be set > accurately > smsc0: chip 0xec00, rev. 0002 > miibus0: <MII bus> on smsc0 > ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 > ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ue0: <USB Ethernet> on smsc0 > ue0: Ethernet address: b8:27:eb:81:ba:40 > random: unblocking device. > smsc0: chip 0xec00, rev. 0002 > ue0: link state changed to DOWN > ue0: link state changed to UP > > > > Best regards > Michael > > > > Warner > > > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGtf9xNdQbi7vgHK0271y5YKDQp_JyGTpjL-6ty_-1Jep_jYXg>