Date: Sat, 3 Nov 2018 05:53:13 +0530 From: Neeraj Pal <neerajpal09@gmail.com> To: freebsd-arm@freebsd.org Subject: FreeBSD-13.0-current not booting/hang in BeagleBone Black Message-ID: <CANi4_RV7j%2BO=Zig8HSd=srvCzO_xPag89WxXFizuYmRkWAD13Q@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi there,
I have written the FreeBSD-13.0-current snapshot BeagleBone image file
into sd card (16gb) using dd. Then, trying to load the image file into
BeagleBone Black Rev. C but it seems it is not working.
And, after that, I have tried FreeBSD-12.0-ALPHA10 image and it is
working fine and below is the dmesg (after log of
FreeBSD-13.0-current). Maybe there is something wrong with the
FreeBSD-13.0-current snapshot, although I am not sure.
Here, is the log:
FreeBSD-13.0-current:
U-Boot SPL 2018.09 (Nov 01 2018 - 03:26:04 +0000)
Trying to boot from MMC1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
Loading Environment from MMC... *** Warning - bad CRC, using default environment
U-Boot 2018.09 (Nov 01 2018 - 03:26:04 +0000)
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
Loading Environment from MMC... *** Warning - bad CRC, using default environment
<ethaddr> not set. Validating first E-fuse MAC
Net: cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
51500 bytes read in 6 ms (8.2 MiB/s)
Found EFI removable media binary efi/boot/bootarm.efi
Scanning disks on usb...
Disk usb0 not ready
Disk usb1 not ready
Disk usb2 not ready
Disk usb3 not ready
Loading kernel...
/boot/kernel/kernel text=0x860500 data=0xb5d28+0x24cdd8 syms=[0x4+0xa91d0+0x4+]-
Loading configured modules...
can't find '/boot/entropy'
/boot/kernel/umodem.ko text=0x1bf4 text=0x1320 data=0x1080+0xf88 syms=[0x4+0x10]
loading required module 'ucom'
/boot/kernel/ucom.ko text=0x1f8c text=0x2e90 data=0x1080+0x17bc syms=[0x4+0x14f]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x87ff1000.
Kernel entry at 0x95000180...
Kernel args: (null)
modulep: 0xc0d3b000
relocation_offset 0
---<<BOOT>>---
ARM Debug Architecture not supported
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT r339979 GENERIC arm
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module_register: cannot register ofwbus/pcib from kernel; already loaded from kl
Module ofwbus/pcib failed to register: 17
module_register: cannot register simplebus/pcib from kernel; already loaded frol
Module simplebus/pcib failed to register: 17
CPU: ARM Cortex-A8 r3p2 (ECO: 0x00000000)
CPU Features:
Thumb2, Security, VMSAv7
Optional instructions:
UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:3 LoUIS:1
Cache level 1:
32KB/64B 4-way data cache WT WB Read-Alloc
32KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory = 0 (0 MB)
avail memory = 505835520 (482 MB)
No PSCI/SMCCC call function found
Texas Instruments AM335x Processor, Revision ES2.1
arc4random: no preloaded entropy cache
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on simplebus0
am335x_prcm0: <AM335x Power and Clock Management> mem 0x200000-0x203fff on simp1
simplebus2: <Flattened device tree simple bus> mem 0x210000-0x211fff on simpleb1
ti_scm0: <TI Control Module> mem 0-0x7ff on simplebus2
regfix0: <Fixed Regulator> on ofwbus0
clk_fixed0: <Fixed clock> on ofwbus0
ti_aintc0: <TI AINTC Interrupt Controller> mem 0x48200000-0x48200fff on simpleb0
ti_aintc0: Revision 5.0
am335x_prcm0: Clocks: System 24.0 MHz, CPU 1000 MHz
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pmu0: <Performance Monitoring Unit> mem 0x4b000000-0x4bffffff irq 0 on ofwbus0
ti_pinmux0: <TI Pinmux Module> mem 0x800-0xa37 on simplebus2
am335x_scm0: <AM335x Control Module Extension> on ti_scm0
gpio0: <TI AM335x General Purpose I/O (GPIO)> mem 0x44e07000-0x44e07fff irq 7 o0
gpiobus0: <OFW GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
gpio1: <TI AM335x General Purpose I/O (GPIO)> mem 0x4804c000-0x4804cfff irq 8 o0
gpiobus1: <OFW GPIO bus> on gpio1
gpioc1: <GPIO controller> on gpio1
gpio2: <TI AM335x General Purpose I/O (GPIO)> mem 0x481ac000-0x481acfff irq 9 o0
gpiobus2: <OFW GPIO bus> on gpio2
gpioc2: <GPIO controller> on gpio2
gpio3: <TI AM335x General Purpose I/O (GPIO)> mem 0x481ae000-0x481aefff irq 10 0
gpiobus3: <OFW GPIO bus> on gpio3
gpioc3: <GPIO controller> on gpio3
uart0: console (115384,n,8,1)atible)> mem 0x44e09000-0x44e0afff irq 11 on simpl0
iichb0: <TI I2C Controller> mem 0x44e0b000-0x44e0bfff irq 17 on simplebus0
iichb0: I2C revision 4.0 FIFO size: 32 bytes
iichb1: <TI I2C Controller> mem 0x4819c000-0x4819cfff irq 19 on simplebus0
iichb1: I2C revision 4.0 FIFO size: 32 bytes
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x48060000-0x48060fff irq 20 on simplebus0
mmc0: <MMC/SD bus> on sdhci_ti0
sdhci_ti1: <TI MMCHS (SDHCI 2.0)> mem 0x481d8000-0x481d8fff irq 21 on simplebus0
mmc1: <MMC/SD bus> on sdhci_ti1
ti_wdt0: <TI Watchdog Timer> mem 0x44e35000-0x44e35fff irq 23 on simplebus0
ti_mbox0: <TI System Mailbox> mem 0x480c8000-0x480c81ff irq 26 on simplebus0
ti_mbox0: revision 4.0
am335x_dmtimer0: <AM335x DMTimer2> mem 0x48040000-0x480403ff irq 28 on simplebu0
Event timer "DMTimer2" frequency 24000000 Hz quality 500
am335x_dmtimer1: <AM335x DMTimer3> mem 0x48042000-0x480423ff irq 29 on simplebu0
Timecounter "DMTimer3" frequency 24000000 Hz quality 500
am335x_rtc0: <AM335x RTC (power management mode)> mem 0x44e3e000-0x44e3efff irq0
am335x_rtc0: AM335X RTC v1.0.6
usbss0: <TI AM33xx integrated USB OTG controller> mem 0x47400000-0x47400fff on 0
usbss0: TI AM335X USBSS v0.0.13
musbotg0: <TI AM33xx integrated USB OTG controller> mem 0x47401400-0x474017ff,00
usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus0 on musbotg0
musbotg1: <TI AM33xx integrated USB OTG controller> mem 0x47401c00-0x47401fff,00
usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus1 on musbotg1
cpswss0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a1007ff,0x4a101200
cpswss0: CPSW SS Version 1.12 (0)
cpswss0: Initial queue size TX=128 RX=384
cpsw0: <Ethernet Switch Port> on cpswss0
miibus0: <MII bus> on cpsw0
smscphy0: <SMC LAN8710A 10/100 interface> PHY 0 on miibus0
smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cpsw0: Ethernet address: 88:c2:55:8d:ec:f6
fb0: <AM335x LCD controller> mem 0x4830e000-0x4830efff irq 43 on simplebus0
ti_adc0: <TI ADC controller> mem 0x44e0d000-0x44e0dfff irq 44 disabled on simpl0
ti_adc0: scheme: 0x1 func: 0x730 rtl: 0 rev: 0.1 custom rev: 0
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
am335x_pmic0: <TI TPS65217 Power Management IC> at addr 0x48 irq 59 on iicbus0
icee0: <AT24C256> at addr 0xa0 on iicbus0
tda0 at addr 0xe0 on iicbus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
icee1: <AT24C256> at addr 0xa8 on iicbus1
icee2: <AT24C256> at addr 0xaa on iicbus1
icee3: <AT24C256> at addr 0xac on iicbus1
icee4: <AT24C256> at addr 0xae on iicbus1
ugen1.1: <Mentor Graphics OTG Root HUB> at usbus1
uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbu1
ugen0.1: <Mentor Graphics OTG Root HUB> at usbus0
uhub1: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbu0
mmcsd0: 16GB <SDHC SL16G 8.0 SN 28A2253B MFG 02/2017 by 3 SD> at mmc0 48.0MHz/4k
uhub1: 1 port with 1 removable, self powered
uhub0: 1 port with 1 removable, self powered
ugen0.2: <The FreeBSD Project (https://www.FreeBSD.org) Virtual serial port> at0
ugen0.2: <The FreeBSD Project (https://www.FreeBSD.org) Virtual serial port> at)
ugen0.2: <The FreeBSD Project (https://www.FreeBSD.org) Virtual serial port> at0
umodem0 on uhub1
umodem0: <Virtual serial port> on usbus0
umodem0: data interface 1, has CM over data, has break
mmcsd1: 4GB <MMCHC S10004 0.8 SN 4EDE5FD4 MFG 06/2016 by 112 0x0000> at mmc1 48k
mmcsd1boot0: 4MB partion 1 at mmcsd1
mmcsd1boot1: 4MB partion 2 at mmcsd1
mmcsd1rpmb: 4MB partion 3 at mmcsd1
am335x_pmic0: TPS65217C ver 1.2 powered by USB
tda0: TDA19988
GEOM_PART: integrity check failed (mmcsd1s4, BSD)
GEOM_PART: integrity check failed (diskid/DISK-4EDE5FD4s4, BSD)
tda0: failed to read EDID
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Warning: no time-of-day clock registered, system time will not be set accurately
random: unblocking device.
FreeBSD-12.0-ALPHA10
freebsd@generic:~ % dmesg
---<<BOOT>>---
ARM Debug Architecture not supported
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA10 r339377 GENERIC arm
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on
LLVM 6.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module_register: cannot register ofwbus/pcib from kernel; already
loaded from kernel
Module ofwbus/pcib failed to register: 17
module_register: cannot register simplebus/pcib from kernel; already
loaded from kernel
Module simplebus/pcib failed to register: 17
CPU: ARM Cortex-A8 r3p2 (ECO: 0x00000000)
CPU Features:
Thumb2, Security, VMSAv7
Optional instructions:
UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:3 LoUIS:1
Cache level 1:
32KB/64B 4-way data cache WT WB Read-Alloc
32KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory = 0 (0 MB)
avail memory = 505872384 (482 MB)
No PSCI/SMCCC call function found
Texas Instruments AM335x Processor, Revision ES2.1
arc4random: no preloaded entropy cache
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on simplebus0
am335x_prcm0: <AM335x Power and Clock Management> mem
0x200000-0x203fff on simplebus1
simplebus2: <Flattened device tree simple bus> mem 0x210000-0x211fff
on simplebus1
ti_scm0: <TI Control Module> mem 0-0x7ff on simplebus2
regfix0: <Fixed Regulator> on ofwbus0
clk_fixed0: <Fixed clock> on ofwbus0
ti_aintc0: <TI AINTC Interrupt Controller> mem 0x48200000-0x48200fff
on simplebus0
ti_aintc0: Revision 5.0
am335x_prcm0: Clocks: System 24.0 MHz, CPU 1000 MHz
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pmu0: <Performance Monitoring Unit> mem 0x4b000000-0x4bffffff irq 0 on ofwbus0
ti_pinmux0: <TI Pinmux Module> mem 0x800-0xa37 on simplebus2
am335x_scm0: <AM335x Control Module Extension> on ti_scm0
gpio0: <TI AM335x General Purpose I/O (GPIO)> mem
0x44e07000-0x44e07fff irq 7 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
gpio1: <TI AM335x General Purpose I/O (GPIO)> mem
0x4804c000-0x4804cfff irq 8 on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
gpioc1: <GPIO controller> on gpio1
gpio2: <TI AM335x General Purpose I/O (GPIO)> mem
0x481ac000-0x481acfff irq 9 on simplebus0
gpiobus2: <OFW GPIO bus> on gpio2
gpioc2: <GPIO controller> on gpio2
gpio3: <TI AM335x General Purpose I/O (GPIO)> mem
0x481ae000-0x481aefff irq 10 on simplebus0
gpiobus3: <OFW GPIO bus> on gpio3
gpioc3: <GPIO controller> on gpio3
uart0: <TI UART (16550 compatible)> mem 0x44e09000-0x44e0afff irq 11
on simplebus0
uart0: console (115384,n,8,1)
iichb0: <TI I2C Controller> mem 0x44e0b000-0x44e0bfff irq 17 on simplebus0
iichb0: I2C revision 4.0 FIFO size: 32 bytes
iichb1: <TI I2C Controller> mem 0x4819c000-0x4819cfff irq 19 on simplebus0
iichb1: I2C revision 4.0 FIFO size: 32 bytes
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x48060000-0x48060fff irq 20 on simplebus0
mmc0: <MMC/SD bus> on sdhci_ti0
sdhci_ti1: <TI MMCHS (SDHCI 2.0)> mem 0x481d8000-0x481d8fff irq 21 on simplebus0
mmc1: <MMC/SD bus> on sdhci_ti1
ti_wdt0: <TI Watchdog Timer> mem 0x44e35000-0x44e35fff irq 23 on simplebus0
ti_mbox0: <TI System Mailbox> mem 0x480c8000-0x480c81ff irq 26 on simplebus0
ti_mbox0: revision 4.0
am335x_dmtimer0: <AM335x DMTimer2> mem 0x48040000-0x480403ff irq 28 on
simplebus0
Event timer "DMTimer2" frequency 24000000 Hz quality 500
am335x_dmtimer1: <AM335x DMTimer3> mem 0x48042000-0x480423ff irq 29 on
simplebus0
Timecounter "DMTimer3" frequency 24000000 Hz quality 500
am335x_rtc0: <AM335x RTC (power management mode)> mem
0x44e3e000-0x44e3efff irq 34,35 on simplebus0
am335x_rtc0: AM335X RTC v1.0.6
usbss0: <TI AM33xx integrated USB OTG controller> mem
0x47400000-0x47400fff on simplebus0
usbss0: TI AM335X USBSS v0.0.13
musbotg0: <TI AM33xx integrated USB OTG controller> mem
0x47401400-0x474017ff,0x47401000-0x474011ff irq 56 on usbss0
usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus0 on musbotg0
musbotg1: <TI AM33xx integrated USB OTG controller> mem
0x47401c00-0x47401fff,0x47401800-0x474019ff irq 57 on usbss0
usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus1 on musbotg1
cpswss0: <3-port Switch Ethernet Subsystem> mem
0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff irq 38,39,40,41 on
simplebus0
cpswss0: CPSW SS Version 1.12 (0)
cpswss0: Initial queue size TX=128 RX=384
cpsw0: <Ethernet Switch Port> on cpswss0
miibus0: <MII bus> on cpsw0
smscphy0: <SMC LAN8710A 10/100 interface> PHY 0 on miibus0
smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cpsw0: Ethernet address: 88:c2:55:8d:ec:f6
fb0: <AM335x LCD controller> mem 0x4830e000-0x4830efff irq 43 on simplebus0
ti_adc0: <TI ADC controller> mem 0x44e0d000-0x44e0dfff irq 44 disabled
on simplebus0
ti_adc0: scheme: 0x1 func: 0x730 rtl: 0 rev: 0.1 custom rev: 0
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
am335x_pmic0: <TI TPS65217 Power Management IC> at addr 0x48 irq 59 on iicbus0
icee0: <AT24C256> at addr 0xa0 on iicbus0
tda0 at addr 0xe0 on iicbus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
icee1: <AT24C256> at addr 0xa8 on iicbus1
icee2: <AT24C256> at addr 0xaa on iicbus1
icee3: <AT24C256> at addr 0xac on iicbus1
icee4: <AT24C256> at addr 0xae on iicbus1
ugen1.1: <Mentor Graphics OTG Root HUB> at usbus1
uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr
1> on usbus1
ugen0.1: <Mentor Graphics OTG Root HUB> at usbus0
uhub1: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr
1> on usbus0
mmcsd0: 16GB <SDHC SL16G 8.0 SN 28A2253B MFG 02/2017 by 3 SD> at mmc0
48.0MHz/4bit/65535-block
uhub1: 1 port with 1 removable, self powered
uhub0: 1 port with 1 removable, self powered
ugen0.2: <The FreeBSD Project (https://www.FreeBSD.org) Virtual serial
port> at usbus0
ugen0.2: <The FreeBSD Project (https://www.FreeBSD.org) Virtual serial
port> at usbus0 (disconnected)
ugen0.2: <The FreeBSD Project (https://www.FreeBSD.org) Virtual serial
port> at usbus0
umodem0 on uhub1
umodem0: <Virtual serial port> on usbus0
umodem0: data interface 1, has CM over data, has break
mmcsd1: 4GB <MMCHC S10004 0.8 SN 4EDE5FD4 MFG 06/2016 by 112 0x0000>
at mmc1 48.0MHz/8bit/65535-block
mmcsd1boot0: 4MB partion 1 at mmcsd1
mmcsd1boot1: 4MB partion 2 at mmcsd1
mmcsd1rpmb: 4MB partion 3 at mmcsd1
am335x_pmic0: TPS65217C ver 1.2 powered by USB
tda0: TDA19988
GEOM_PART: integrity check failed (mmcsd1s4, BSD)
GEOM_PART: integrity check failed (diskid/DISK-4EDE5FD4s4, BSD)
tda0: failed to read EDID
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Warning: no time-of-day clock registered, system time will not be set accurately
GEOM_PART: mmcsd0s2 was automatically resized.
Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2`
to revert them.
random: unblocking device.
lock order reversal:
1st 0xc2415b10 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:3916
2nd 0xd37dcc00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:289
stack backtrace:
lo0: link state changed to UP
cpsw0: link state changed to DOWN
cpsw0: link state changed to UP
--
Thank you!
Sincere regards;
Neeraj Pal
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANi4_RV7j%2BO=Zig8HSd=srvCzO_xPag89WxXFizuYmRkWAD13Q>